Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Making a melodeon case  (Read 8279 times)

0 Members and 1 Guest are viewing this topic.

boscaceol

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Making a melodeon case
« on: November 04, 2012, 11:10:01 AM »

I have an odd ball size melodeon and now have plenty of time on my hands! I'm thinking about making a case.  I'm looking for any advice on the best way to make a reasonably light but strong case.  Ideas, materials etc.

John
Logged
GC Saltarelle, self build GC Pariselle

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Making a melodeon case
« Reply #1 on: November 04, 2012, 12:00:51 PM »

I haven't looked into this, so my thoughts are only theoretical - just thinking out loud.  My first inclination is toward a composite material glued together with aluminium profiles at corners and edges.  Can you find a supplier of either GRP/foam sandwich, or GRP/honeycomb?  These would make a "flight case" manner of construction.  Wood, even low density chipboard, will be quite heavy like the commercial boxes and need covering with leatherette or could just be painted - effective, but lacks the sense of pride you're probably hoping for.  If size is not a problem, then a fairly thick high density foam could be laminated with a tough outer shell only (ply, GRP, carbon fibre sheet?) though that would require local reinforcement for hinges and catches.

Another possibility would be to make a mould and lay up a GRP case in two parts, so no need for corners and edges, but wuld need to be foam lined to minimise weight.  The problem areas would be the seal between case and lid, but lips could be added to the two halves.

Rob.
Logged

boscaceol

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Making a melodeon case
« Reply #2 on: November 04, 2012, 12:39:30 PM »

Thanks Rob, my initial thoughts were to make from wood.  However I like your ideas; a frame made from a light aluminium profile is a good idea and Should be readily available, and again if I can source a foam backed composite would make a decent box.
John (:)
Logged
GC Saltarelle, self build GC Pariselle

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making a melodeon case
« Reply #3 on: November 04, 2012, 01:29:13 PM »

People who make flight cases sell corners, locks hinges etc,  then you just need to choose a material for the panels, eg plywood or aluminium sheet.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Making a melodeon case
« Reply #4 on: November 04, 2012, 06:02:09 PM »

Mine's made from 6mm plywood, and I don't find it too heavy.  I just have a painted finish.
Logged
Tony S

boscaceol

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Making a melodeon case
« Reply #5 on: November 04, 2012, 09:05:43 PM »

Thanks for all the advice, I'm going to be busy exploring various possibilities.
Great stuff  :||:

John
Logged
GC Saltarelle, self build GC Pariselle

tedrick

  • Guest
Re: Making a melodeon case
« Reply #6 on: November 04, 2012, 10:29:47 PM »

I know there is a video series on youtube discussing building road cases -
Logged

streb

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 100
Re: Making a melodeon case
« Reply #7 on: November 04, 2012, 10:47:01 PM »

Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Making a melodeon case
« Reply #8 on: November 04, 2012, 11:00:22 PM »

Just watched the youtube stuff.  Boy does it make me regret losing the job where we had all the air tools!  The cases being made were for road-hauling a full rock show and appeared to be made of (at least) 12mm ply, not the sort of weight you want to be lugging around by hand all day on a morris tour.  Wives amongst our side would often sit on the empty cases whilst we were playing and those commercial jobs are just glued chipboard.  Mind you, one lady went on a diet after the case collapsed - but the guy who owned it is famous for destroying everything he owns, so it was probably on its way out already.

Choice of foam inside will be dictated by whether you can fabric line it or not.  If you don't have a lining, then be sure your foam won't produce dust - the worst enemy of a free reed instrument.

Rob.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Making a melodeon case
« Reply #9 on: November 05, 2012, 11:05:11 AM »

You could always go down the boat building route and do it stitch and glue ply with a epoxy and fibreglass sheath. Should be pretty sturdy (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Making a melodeon case
« Reply #10 on: November 05, 2012, 12:19:45 PM »

Box making! A whole art unto itself. Weight is the first consideration. Someone once made me a beautiful Melodeon Case from old Victorian desk tops. Unfortunately it ended up as a two man lift.
  The actual material that you make the carcass from is not too important, I've even had those made out of cardboard, not very good and fold up if you sit on them. A thin plywood about three or four Mil.
Would be ok.  It's a good idea to make up a complete box to its finished dimensions and then cut it through at the place where you want the lid.(just realised this is easier to do than describe)
Use a wood PVA and secure with panel pins, make sure they are very thin you don't want to split anything.
You will need to go on the Internet  to find fixtures and fittings, there are millions out there.
Now this is where the strength comes xfrom. Fibre glass matting, available from car spares shops or better from a specialist. The net again. There is no need to cover the whole box, just an inch either side of all the joints . Having sanded all that down so there are no bumps, your nightmare now begins.
Covering. There are a host of materials out there. Rexine is no longer made but there is an equivalent,
Buckram is good and hard wearing but the ultimate is of course leather. Being a box it's not too important as to what type, for books you are talking about £200 a skin and you'd probably need two.
The thing to do is talk to a leather supplier and tell them exactly what you want it for. They sell seconds thirds off cuts etc.
As for the actual covering operation, will have to leave that up to your own ingenuity.
Lining,  again on the web there is available a decent felt which has a sticky back available in several colours.  Two suppliers for all the above are J. Hewitt and Son and Russell book crafts .
 And I wish you the very best of luck. If you have any queries don't hesitate to get in touch.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Jackaspandy

  • Good talker
  • **
  • Offline Offline
  • Posts: 60
Re: Making a melodeon case
« Reply #11 on: November 05, 2012, 12:45:38 PM »

I had an old hard-back Toshiba laptop case - stripped out the middle bits - and it made a perfect fit for a Hohner 4-stop.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Making a melodeon case
« Reply #12 on: November 05, 2012, 07:52:28 PM »

How about an all leather case?
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

boscaceol

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Making a melodeon case
« Reply #13 on: November 05, 2012, 08:06:57 PM »

Can you get a leather case large enough?
Logged
GC Saltarelle, self build GC Pariselle

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Making a melodeon case
« Reply #15 on: November 05, 2012, 09:36:50 PM »

If you make it yourself, of course you can. You could make one the size of a Volkswagon if you had the time the money and the inclination
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Re: Making a melodeon case
« Reply #16 on: March 19, 2013, 02:36:13 AM »

This forum must be full of melodeon cases - hard cases, sad cases, ...
::)
Logged

YorkieKen

  • YorkieKen
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 149
Re: Making a melodeon case
« Reply #17 on: March 19, 2013, 08:13:56 AM »

This forum must be full of melodeon cases - hard cases, sad cases, ...
::)
 
 Smiley,I'll second that....Pikey step forward  :-\
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Making a melodeon case
« Reply #18 on: March 19, 2013, 08:36:00 AM »

This forum must be full of melodeon cases - hard cases, sad cases, ...
::)

Nut cases
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Making a melodeon case
« Reply #19 on: March 19, 2013, 08:43:10 AM »

..............
Choice of foam inside will be dictated by whether you can fabric line it or not.  If you don't have a lining, then be sure your foam won't produce dust - the worst enemy of a free reed instrument.

Rob.

I have just made a case but didn't line it yet.
In fact I wasn't going to bother with lining, just use foam, but having read this comment about dust, I am having second thoughts.
I have seen foam turn to dust before, but I thought I might just replace it if and when this starts to happen.
I think now though that I might line it.
Any tips on the best material to use and method would be appreciated.

There is a felt available which is self adhesive and is specifically made for lining boxes.
It's quite difficult to use because once you apply it to the surface it's there for good.
Check out  J Hewitt and son in Scotland. It is  acid free and won't harm the contents.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal