Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Difference in TONE* on a 2-row  (Read 4135 times)

0 Members and 1 Guest are viewing this topic.

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Difference in TONE* on a 2-row
« on: November 06, 2012, 02:57:13 PM »

I recently started learning tunes that are played on a one-row. I play them on my B/C accordion but only use one row. To switch things up I'll use both rows, play the tune a few times on the C row then move down to the B row and play the tune a few times there.

I've noticed that playing in the B-row has a brighter tone. Is this because of the construction of the instrument or the reeds themselves? Is this common? is this bad?
I never really noticed it when I play "cross-row" before but now that I did notice it I noticed that my F# 5th button B-row jumps out a little bit more when compared to the rest of the tune played on the C-row.
« Last Edit: November 06, 2012, 03:19:06 PM by deltasalmon »
Logged
Sean McGinnis
Bordentown City, NJ, USA

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Difference in town on a 2-row
« Reply #1 on: November 06, 2012, 03:16:05 PM »

I recently started learning tunes that are played on a one-row. I play them on my B/C accordion but only use one row. To switch things up I'll use both rows, play the tune a few times on the C row then move down to the B row and play the tune a few times there.

I've noticed that playing in the B-row has a brighter tone. Is this because of the construction of the instrument or the reeds themselves? Is this common? is this bad?
I never really noticed it when I play "cross-row" before but now that I did notice it I noticed that my F# 5th button B-row jumps out a little bit more when compared to the rest of the tune played on the C-row.
Almost certainly this is due to the B-row pallets lifting higher from the pallet-board/fondo than the C-row pallets. Compared with the inside row, the action levers are longer on the outside row of buttons and hence lift the pallets higher from the sound holes, allowing more volume to come through. In a well-designed instrument, this effect can be minimised almost to the degree of being hardly noticeable. In other instruments it is much more pronounced.

The other possible cause of this effect is that sound from the inside row pallets is sometimes partly muffled by the edge of the keyboard and lower edge of the grille. This is the reason that higher quality instruments often have grille cutouts on the keyboard plate itself, so that more sound comes through.

Possible remedies in your case: difficult to say without seeing the instrument, but you could try gluing an additional strip of fabric inside the grille opposite the outside row pallets to partly muffle the sound from the B-row. You could also investigate the possibility of cutting additional fretwork into the keyboard top plate, but this is more drastic and not necessarily a trivial modification.

This recent thread may give you some ideas:
http://forum.melodeon.net/index.php/topic,10644.msg131578.html#msg131578



Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Difference in TONE* on a 2-row
« Reply #2 on: November 06, 2012, 03:23:28 PM »

The extreme of this is in the 9 coupler Paolo Soprani 4 voice models where the difference is so extreme that it sounds like two completely different boxes - on a box like a D/G it doesn`t matter nearly as bad as they tend to be played up and down the row in the main but I`d imagine it`s very anoying in a B/C box to have that severe degree of difference.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Difference in TONE* on a 2-row
« Reply #3 on: November 06, 2012, 05:33:48 PM »

Take the grill off. A lot of class players do, including some Grey 4 voice players, try it.  (:) AtB mory

p.s. don't think you've got that right Steve, with the levers I mean, yes they are longer but you have the double action/pivot going on AtB mory
« Last Edit: November 06, 2012, 05:40:03 PM by mory »
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Difference in TONE* on a 2-row
« Reply #4 on: November 06, 2012, 05:43:13 PM »

A machinist friend of mine drilled a bunch of holes in the housing for the couplers on his Boxeen, to alleviate this problem.  I was thinking of taking the grill off my Corona, as its inner row is thoroughly anemic.  I'll let you know how that goes.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Difference in TONE* on a 2-row
« Reply #5 on: November 06, 2012, 06:12:50 PM »

p.s. don't think you've got that right Steve, with the levers I mean, yes they are longer but you have the double action/pivot going on AtB mory
The double action/pivot is only present on some instruments. In our household none of our instruments (Hohners, Castagnaris, Baffettis) have it.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Difference in TONE* on a 2-row
« Reply #6 on: November 06, 2012, 06:19:43 PM »

Thanks for the responses guys

p.s. don't think you've got that right Steve, with the levers I mean, yes they are longer but you have the double action/pivot going on AtB mory
The double action/pivot is only present on some instruments. In our household none of our instruments (Hohners, Castagnaris, Baffettis) have it.

It's a Weltmeister.

Take the grill off. A lot of class players do, including some Grey 4 voice players, try it.  (:) AtB mory

p.s. don't think you've got that right Steve, with the levers I mean, yes they are longer but you have the double action/pivot going on AtB mory

I'll take the grill off and give that a try. It's much less pretty without the grill. It's very metallic on the inside.
Logged
Sean McGinnis
Bordentown City, NJ, USA

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Difference in TONE* on a 2-row
« Reply #7 on: November 06, 2012, 08:13:28 PM »

The double action/pivot is only present on some instruments. In our household none of our instruments (Hohners, Castagnaris, Baffettis) have it.

the Hohners I`ve seen it on is generally the Corona Family (and the Clubs etc based on the same action) if that`s the mech system you`re on about

Take the grill off. A lot of class players do, including some Grey 4 voice players, try it.  (:) AtB mory

I Tried it Mory, and the fingerboard plate, the inner row still sounded like socks stuffed in, the only cure I could find was to Not own the box :(
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Difference in town on a 2-row
« Reply #8 on: November 06, 2012, 08:20:05 PM »

Compared with the inside row, the action levers are longer on the outside row of buttons and hence lift the pallets higher from the sound holes,


This is not correct.  It is not the length of the lever that determines how high the pallet lifts, but the ratio between the length of the button lever and the length of the pallet lever.  Usually the ratio is the same for both rows, (at approx 1:1)  shorter button lever and pallet lever for the inside row, longer button lever and pallet lever for the outside row.  That assumes that the button travel is the same on both rows.  What is different is the more acute angle of lift for the pallets on the inside row, and the masking effect of the couplers/keyboard/action over the vents from the inside row reed blocks. 

This difference is very common, and is most pronounced on 3 or 4 voice boxes where the reed blocks are packed in so that some are almost directly under the keyboard.   Two voice boxes eg Hohner 2915, have only very slight differences in sound between the rows, and have plenty of room inside the case so neither of the blocks  is masked much by the keyboard.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Difference in TONE* on a 2-row
« Reply #9 on: November 06, 2012, 09:44:28 PM »

Taking the grille off my Corona really made a difference in bringing up the volume of the inner row.  I might buy a spare grille and just saw the bottom third off.   :||:  And/or saw a big slot out of the top of the keyboard.  Can always glue it back in place if I want to sell, after all. 
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Difference in town on a 2-row
« Reply #10 on: November 06, 2012, 10:37:30 PM »

Compared with the inside row, the action levers are longer on the outside row of buttons and hence lift the pallets higher from the sound holes,


This is not correct.  It is not the length of the lever that determines how high the pallet lifts, but the ratio between the length of the button lever and the length of the pallet lever.  Usually the ratio is the same for both rows, (at approx 1:1)  shorter button lever and pallet lever for the inside row, longer button lever and pallet lever for the outside row.  That assumes that the button travel is the same on both rows.  What is different is the more acute angle of lift for the pallets on the inside row....
Yes - that makes sense. Nevertheless the effect of the more acute angle of lift on the inside row pallets means that when the buttons are depressed there is still less overall clearance on the inside row pallets compared with the outside row pallets (on the instruments I've seen anyway). This results in a louder, brighter, sound on the outer row. I've actually tested this by limiting the button travel on the outer row, thereby causing the pallets to open with a smaller gap. Result: a more balanced sound.

Quote
...and the masking effect of the couplers/keyboard/action over the vents from the inside row reed blocks. 
Yes - I agree with this.

Quote
This difference is very common, and is most pronounced on 3 or 4 voice boxes where the reed blocks are packed in so that some are almost directly under the keyboard.   Two voice boxes eg Hohner 2915, have only very slight differences in sound between the rows, and have plenty of room inside the case so neither of the blocks  is masked much by the keyboard.
It is my experience with 3-voice instruments that there is a greater perceived difference between the two rows when just the two MM reeds are selected. When all three voices are sounding (LMM), the difference between the two rows is less obvious, perhaps because of the more powerful sound of the L reeds and also that the L reed block is often mounted almost centrally in the instrument (so little or no differential masking effect).
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Difference in TONE* on a 2-row
« Reply #11 on: November 07, 2012, 04:00:55 AM »

On all the two-voice boxes I've owned I prefer the slightly muffled, flutier sound of the inner row over the brassier quality of the outer row. Just as well because on C#/D probably 7 out of every 10 notes are sounded on the inner row.

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Difference in TONE* on a 2-row
« Reply #12 on: November 07, 2012, 06:55:12 AM »

Sorry Steve_freereeder for some reason I thought we were talking Paolo. AtB mory
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Difference in TONE* on a 2-row
« Reply #13 on: November 07, 2012, 07:54:39 AM »

Isn't this the reason so many accordions have sound holes cut in the top (decoratively) or as vents in the underside of the keyboard?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Difference in TONE* on a 2-row
« Reply #14 on: November 07, 2012, 07:56:08 AM »

Yes, I believe it is.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Difference in TONE* on a 2-row
« Reply #15 on: November 07, 2012, 09:20:20 AM »

Isn't this the reason so many accordions have sound holes cut in the top (decoratively) or as vents in the underside of the keyboard?
RTFPP!  ::)

The other possible cause of this effect is that sound from the inside row pallets is sometimes partly muffled by the edge of the keyboard and lower edge of the grille. This is the reason that higher quality instruments often have grille cutouts on the keyboard plate itself, so that more sound comes through.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Difference in TONE* on a 2-row
« Reply #16 on: November 07, 2012, 09:25:15 AM »

One other factor not yet discussed in this thread:
It is also my experience that any perceived difference in volume and/or timbre between the rows is more pronounced to the player than to the listener. In other words it might sound none too good to you, but to anyone listening it's probably OK.  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Difference in TONE* on a 2-row
« Reply #17 on: November 07, 2012, 12:42:41 PM »

One other factor not yet discussed in this thread:
It is also my experience that any perceived difference in volume and/or timbre between the rows is more pronounced to the player than to the listener. In other words it might sound none too good to you, but to anyone listening it's probably OK.  (:)

Very true.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Difference in TONE* on a 2-row
« Reply #18 on: November 07, 2012, 03:30:37 PM »

Quote
Quote from: Christopher K. on Today at 07:54:39 AM

    Isn't this the reason so many accordions have sound holes cut in the top (decoratively) or as vents in the underside of the keyboard?

RTFPP!  ::)

?

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Difference in TONE* on a 2-row
« Reply #19 on: November 07, 2012, 04:16:24 PM »

Quote
Quote from: Christopher K. on Today at 07:54:39 AM

    Isn't this the reason so many accordions have sound holes cut in the top (decoratively) or as vents in the underside of the keyboard?

RTFPP!  ::)

?
This could be a new game for Melodeons at Witney. ;)
Clue: the last two letters could stand for 'previous' and 'post'.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal