Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dino Battetti air button  (Read 2341 times)

0 Members and 1 Guest are viewing this topic.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Dino Battetti air button
« on: November 07, 2012, 11:03:49 AM »

Has anyone else had a problem with the air button on the new Dino?
It arrived with a very sharp triangular button which actually cut the top of my thumb.
I 'phoned John Loomes at the Music Room who suggested I file it down to suit. or return it . Admirable service, they can't be faulted . They said if you do this it won't invalidate the guarantee. With masking tape I covered up all entrances to the box and had a saw/ sand on the button. That was difficult.
I am loath to pull a brand new box apart to get at that button properly .
Any suggestions Gang.?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Dino Battetti air button
« Reply #1 on: November 07, 2012, 11:19:11 AM »

I am loath to pull a brand new box apart to get at that button properly .

In that case perhaps you should send it back?

If you decide to try again yourself then you just need to take off the bass cover plate - 4 screws to remove, but slightly easier of you detach one end of the LH strap first.   The button is attached to the cover plate.  Once it is off you can support the back of the button so it doesn't retreat from your file.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Dino Battetti air button
« Reply #2 on: November 07, 2012, 11:32:53 AM »

I am loath to pull a brand new box apart to get at that button properly .

In that case perhaps you should send it back?

If you decide to try again yourself then you just need to take off the bass cover plate - 4 screws to remove, but slightly easier of you detach one end of the LH strap first.   The button is attached to the cover plate.  Once it is off you can support the back of the button so it doesn't retreat from your file.

Thanks for that Theo.
The Music Room have been great about this but it is a pain sending it back.
 I'll remove the cover plate. I thought I would have to remove the Bass section from the bellows. Yuk!
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Dino Battetti air button
« Reply #3 on: November 07, 2012, 11:46:55 AM »

You`d only have to send the button back . they`ll swap the part with a less aggressive one .. Which Baffetti is it ? . the Air button on mine (a BP2) looks like a black note off a toy portasound Keyboard (which is probably what it is)
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Dino Battetti air button
« Reply #4 on: November 07, 2012, 11:53:53 AM »

Adam, it's a DB super II it came with a horrible sharp triangular lump of an air button which really did cut my thumb. One doesn't realise quite how much you use one ,until you play.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Dino Battetti air button
« Reply #5 on: November 07, 2012, 11:57:26 AM »

Weird !! . I`d have thought they`d have gone with the longer bar on all models . so long as you`ve sorted it, that`s great , I wonder if yours was a bad moulding or it was a design fault of the button .
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Dino Battetti air button
« Reply #6 on: November 07, 2012, 12:01:56 PM »

Not sure about that. It is a real peace of wood not a moulding. A longer smoother piece would be have been better. Rounded so the thumb could easily slip over it.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Dino Battetti air button
« Reply #7 on: November 07, 2012, 12:40:40 PM »

Some manufacturers simply do not understand the air-button on diatonics. They are used to making them for piano accordion which does not get much use and uses a very small air hole.
I seem to spend much of my time modifying Italian air-buttons, enlarging holes, etc.

Hohner Erica/Pokerwork air-buttons work best for me.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Dino Battetti air button
« Reply #8 on: November 07, 2012, 12:42:13 PM »

If it is like the DB Carnival I repaired recently the button is fixed by an overly heavy springy bit of alloy to the end board by two small screws. This means it is easily removable and you can replace it with something more to your choosing whilst being able to go back to the original should you wish.

Worth learning how to do it so that when the alloy spring inevitably breaks you will know how to repair it (:)

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Dino Battetti air button
« Reply #9 on: November 07, 2012, 12:46:11 PM »

'spose there's no chance of sorting out the FR18's air button problems then,is there Lester?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Dino Battetti air button
« Reply #10 on: November 07, 2012, 12:49:43 PM »

'spose there's no chance of sorting out the FR18's air button problems then,is there Lester?

aaargh!!! I did one last year - never, ever again!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

DaveD

  • Good talker
  • **
  • Offline Offline
  • Posts: 82
Re: Dino Battetti air button
« Reply #11 on: November 11, 2012, 08:22:56 PM »

I also have recently purchase a new Dino Baffetti / Oakwood Binci and had similar air botton problems. After taking Lester's and Theo's recommended minor alterations the problem is now solved, but yes the design/shape of the air button requires amending.

Dave
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal