Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tommy button diameter  (Read 1498 times)

0 Members and 1 Guest are viewing this topic.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Tommy button diameter
« on: November 09, 2012, 04:53:34 PM »

Would some kind soul with a Vernier caliper measure the treble button diameter on a Castagnari Tommy.
It's a case of amnesia deja-vu - I've forgotten this before  :(

Metric please, Lester.  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

JohnA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 141
Re: Tommy button diameter
« Reply #1 on: November 09, 2012, 05:26:37 PM »

If it's the same as a Benny/Big, which I think it is, then 12.9 mm. If it isn't.......
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tommy button diameter
« Reply #2 on: November 09, 2012, 07:32:05 PM »

Methinks you may be right - many thanks.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Tommy button diameter
« Reply #3 on: November 10, 2012, 10:10:17 AM »

.. I cannot imagine this conversation happening in any other field of human discourse.  Ain't melnet wonderful!
Logged
  _       _    _      _ 

jonm

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 209
Re: Tommy button diameter
« Reply #4 on: November 10, 2012, 10:53:52 AM »

How accurately do you need the measurement? I make them a little under 13mm without calipers/micrometer, probably 12.7mm for the half inch.

Can provide more accurate value after the weekend if necessary.
Logged
Castagnari Mory and Giordy D/G, Hohner Erica, four-stop in G, two-stop in G

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tommy button diameter
« Reply #5 on: November 10, 2012, 12:35:05 PM »

How accurately do you need the measurement? I make them a little under 13mm without calipers/micrometer, probably 12.7mm for the half inch.

Can provide more accurate value after the weekend if necessary.

It's ok, I have various Italian buttons in stock. I just couldn't remember which size to send out to a customer who has lost a button.
What kind of buttons do you make?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

jonm

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 209
Re: Tommy button diameter
« Reply #6 on: November 10, 2012, 02:12:37 PM »

Sorry, no, I was using "make" in the context of "measure" - from my own Tommy - not "manufacture."
Logged
Castagnari Mory and Giordy D/G, Hohner Erica, four-stop in G, two-stop in G

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tommy button diameter
« Reply #7 on: November 10, 2012, 07:05:42 PM »

Ah, my mishtake  ::)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal