Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Width of reed plates? What is the range?  (Read 1819 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Width of reed plates? What is the range?
« on: November 16, 2012, 08:51:36 PM »

Nearly put this in the tuning bench thread, but decided that three consecutive posts by me would just be too sad. However, inspired by the aforementioned thread, and the wonderfully engineered reed fitting arrangements, it crossed my mind to wonder:
Excluding Liliputs etc, how much variation is there in the width of reed plates? I haven't measured extensively, but looking at a bunch of Italian PA plates from at least two different boxes they are all 16 mm wide.
Can't get at any Hohner reeds easily.

So is there a lot of variation, or do they tend to standardise around this width?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Width of reed plates? What is the range?
« Reply #1 on: November 16, 2012, 10:16:49 PM »

modern hohner 16mm , Lilliput/Imperial etc 14.5mm
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Width of reed plates? What is the range?
« Reply #2 on: November 17, 2012, 10:40:09 AM »

Thanks Mike
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Width of reed plates? What is the range?
« Reply #3 on: November 17, 2012, 10:52:39 AM »

Italian treble and chord reed plates are usually 16mm too.  Bass reeds are wider.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Width of reed plates? What is the range?
« Reply #4 on: November 18, 2012, 09:24:17 PM »

Just in case anyone else is interested, I just checked the basses on an old Hohner C/F and they come in at 20mm and 25mm nominally.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Width of reed plates? What is the range?
« Reply #5 on: November 19, 2012, 11:33:28 AM »

Frans van der Aa says he grinds the edges to fit. Not measured tham m'self
Logged
  _       _    _      _ 

PurpleGoddess

  • New Starter
  • Offline Offline
  • Posts: 1
Re: Width of reed plates? What is the range?
« Reply #6 on: June 29, 2013, 08:57:34 PM »

Does the altering the width of the reed plate have any effect over the reed, as in less stable tuning or shortened life?
« Last Edit: June 29, 2013, 09:01:40 PM by PurpleGoddess »
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Width of reed plates? What is the range?
« Reply #7 on: July 02, 2013, 09:20:26 PM »

Having had to grind a few plates to fit in older Italian student accordions, I can't say it affects the sound. Waxing it in pretty much causes it to share mass with the other plates on the block.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal