Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner bass mods/Bushing.  (Read 2442 times)

0 Members and 1 Guest are viewing this topic.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Hohner bass mods/Bushing.
« on: November 20, 2012, 05:55:02 AM »

I've run out of ideas for the search box, and STILL can't find the link to the set of photos of someone doing this work. Was it on a Hohner Presswood? It involved clipping the bass arms down, attaching some dowel, heat-shrink tube - very tidy work. As I said, I can't find it. If anyone knows where to look I would be very grateful if they'd tell me.   :|bl



Thanks.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hohner bass mods/Bushing.
« Reply #1 on: November 20, 2012, 07:03:33 AM »

Possibly here: http://forum.melodeon.net/index.php/topic,5547.msg69974.html#msg69974 but the photos seem to be missing.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner bass mods/Bushing.
« Reply #3 on: November 20, 2012, 08:04:31 AM »

It involved clipping the bass arms down, attaching some dowel,

I think you could make an even better job by replacing the flat Hohner rods with Italian style wire, then you can fit the readily available Italian black plastic pistons and screw in buttons.  The pistons are cheap as chips, and superior to dowel in looks, smoother surface to gear on the felt bushes, and come ready drilled to accept the wire at the back and the button at the front.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Hohner bass mods/Bushing.
« Reply #4 on: November 20, 2012, 09:53:46 AM »

I think you could make an even better job by replacing the flat Hohner rods with Italian style wire, then you can fit the readily available Italian black plastic pistons and screw in buttons.  The pistons are cheap as chips, and superior to dowel in looks, smoother surface to gear on the felt bushes, and come ready drilled to accept the wire at the back and the button at the front.

Hi, I'm interested in this.  Do you have a link to said Italian pistons and buttons?   I'd quite like to improve the bass action on my poker work.   By the way I was thinking of using model aircraft parts to form the linkage at the bottom, you can get all sorts of connections from basic plastic clevises to posh rose joints, typically they suit 2mm rod ..
http://www.giantshark.co.uk/nylon-clevis-2x29mm-p-402692.html

Thanks, Tony S
Logged
Tony S

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner bass mods/Bushing.
« Reply #5 on: November 20, 2012, 10:23:00 AM »

Hi, I'm interested in this.  Do you have a link to said Italian pistons and buttons?   I'd quite like to improve the bass action on my poker work.   By the way I was thinking of using model aircraft parts to form the linkage at the bottom, you can get all sorts of connections from basic plastic clevises to posh rose joints, typically they suit 2mm rod ..
http://www.giantshark.co.uk/nylon-clevis-2x29mm-p-402692.html

Thanks, Tony S

Marc Seraffini uses these model aircraft parts to great success.

But a simple fix for pokerwork bass actions is to reface the pallets with thicker felt/leather and then ream out the button holes and line them with proper bushing felt.

This will silence the action which is perfectly servicable as an action just noisy.

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Hohner bass mods/Bushing.
« Reply #6 on: November 20, 2012, 10:34:23 AM »

But a simple fix for pokerwork bass actions is to reface the pallets with thicker felt/leather and then ream out the button holes and line them with proper bushing felt.

I did exactly that on another box and it worked really well.  On my pokerwork the mechanism is quite worn, with the holes oversized and not parallel sided, so there's a lot of side-to-side slop on the buttons.
Logged
Tony S

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner bass mods/Bushing.
« Reply #7 on: November 20, 2012, 11:35:25 AM »

I think you could make an even better job by replacing the flat Hohner rods with Italian style wire, then you can fit the readily available Italian black plastic pistons and screw in buttons.  The pistons are cheap as chips, and superior to dowel in looks, smoother surface to gear on the felt bushes, and come ready drilled to accept the wire at the back and the button at the front.

Hi, I'm interested in this.  Do you have a link to said Italian pistons and buttons?   I'd quite like to improve the bass action on my poker work.   By the way I was thinking of using model aircraft parts to form the linkage at the bottom, you can get all sorts of connections from basic plastic clevises to posh rose joints, typically they suit 2mm rod ..
http://www.giantshark.co.uk/nylon-clevis-2x29mm-p-402692.html

Thanks, Tony S

I can't find them on Charlie Marshalls web site, but I have a bag of them here.  Contact me off the forum and I'll hunt out the price.

The model aircraft clevis looks useful, though the standard Italian wire is only about 1.5mm.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Hohner bass mods/Bushing.
« Reply #8 on: November 20, 2012, 04:30:27 PM »

All very helpful, thank you. I think I know what you mean by 'pistons', but a picture would be appreciated. As I only have one linkage to cobble together, I think I'm going to try & solder a wire on to the short end of the flat Hohner arm. Or a piece of dowel/heat shrink. It depends largely on what I stumble over on the shed floor first.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner bass mods/Bushing.
« Reply #9 on: November 20, 2012, 04:57:29 PM »

All very helpful, thank you. I think I know what you mean by 'pistons', but a picture would be appreciated. As I only have one linkage to cobble together, I think I'm going to try & solder a wire on to the short end of the flat Hohner arm. Or a piece of dowel/heat shrink. It depends largely on what I stumble over on the shed floor first.
Sounds like you like to make extra work for yourself. I've emailed a photo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Hohner bass mods/Bushing.
« Reply #10 on: November 20, 2012, 11:19:03 PM »

Harsh, but fair Theo.  :D

Thanks for the photo. As used on my Beltuna, or something very similar.

As I said, I only have one linkage to cobble together, so I've araldited a length of wire on to the short end of the flat Hohner arm, which seems acceptable. There's nowt wrong wi' a good bodge. I will re-post if & when it fails.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal