Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pallet arms  (Read 1576 times)

0 Members and 1 Guest are viewing this topic.

Edwab78

  • Member
  • *
  • Offline Offline
  • Posts: 8
Pallet arms
« on: November 25, 2012, 02:54:29 PM »

Does anyone know where I can get a new set of pallet arms for a one row (10 button) melodeon? Alternatively can anyone give me any advice on how I might fabricate a set from scratch?

Many thanks
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Pallet arms
« Reply #1 on: November 25, 2012, 03:22:51 PM »

Well, the usual suspect would be Charlie Marshall :
http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

who is worth a chat even if you can't see what you want on his site. Failing that, a few close up photos of your box would help.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Edwab78

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Pallet arms
« Reply #2 on: November 25, 2012, 03:45:50 PM »

One has broken an a couple of others are on the way out. Thought I'd replace the lot but can't seem to find them to buy anywhere. Am quite happy to fabricate myself but need advice as to what material they should be made from, what diameter wire to use (~2.5mm?) and how to go about flattening the end for drilling (would a vice work?!). Here's a picture...



Will look at the website suggested.

Many thanks
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Pallet arms
« Reply #3 on: November 25, 2012, 07:43:54 PM »

Brass wire would work, but a vice is not going to flatten that for you. you would need a hydro press, or a hammer.
 I cant tell what they used in the pic, but iron wire will work too, you can heat it with a torch, and pound it flat with a small hammer. let it cool on its own or it will be hard to drill and it may get brittle. This is going to take some practice, but wire is pretty cheap.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Pallet arms
« Reply #4 on: November 25, 2012, 08:10:26 PM »

I have these in stock as used on the Clipper melodeon.  They are just right for your box.
Set of 10 - £25 including UK postage.

Contact me through www.melodeons.com
« Last Edit: November 26, 2012, 04:21:20 PM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Edwab78

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Pallet arms
« Reply #5 on: November 28, 2012, 07:34:00 AM »

Decided to have a go myself (As has been pointed out brass wire is relatively inexpensive and I don't really have much to loose). If my attempt fails you will probably find an order coming your way Rees...

Not sure what the current arms are made form. They seem to be some kind of ferrous alloy - I don't think they are brass. They are not actually formed from wire but a flat strip of metal that has been formed into a V to give rigidity. Unfortunately they have become very brittle with age.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Pallet arms
« Reply #6 on: November 28, 2012, 12:29:21 PM »

I don't think they are brass.

A magnet will tell you soon enough!  ;D
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal