Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: pokerwork spring  (Read 15224 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: pokerwork spring
« Reply #20 on: December 01, 2008, 06:50:06 AM »

And then Roberts your father's sibling!

No street cred, though ;D

You're already playing some thing other than a Castagnari so why expect street cred   ::)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: pokerwork spring
« Reply #21 on: December 01, 2008, 08:46:17 AM »

You're already playing some thing other than a Castagnari so why expect street cred   ::)

What! So Tony Hall has no street cred because he plays " some other thing than a Castagnari"?   

« Last Edit: December 01, 2008, 08:50:23 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

finnhorse

  • Guest
Re: pokerwork spring
« Reply #22 on: December 01, 2008, 10:52:46 AM »

And then Roberts your father's sibling!

No street cred, though ;D

You're already playing some thing other than a Castagnari so why expect street cred   ::)

In some neighborhoods guys get capped for sayin' less than this!   ;D

   ...who's got a Hohner?  Throw it up and respect..
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: pokerwork spring
« Reply #23 on: December 01, 2008, 11:50:12 AM »

And then Roberts your father's sibling!

No street cred, though ;D

You're already playing some thing other than a Castagnari so why expect street cred   ::)

In some neighborhoods guys get capped for sayin' less than this!   ;D

   ...who's got a Hohner?  Throw it up and respect..

Just in case people think I was serious I own 4 Hohners

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: pokerwork spring
« Reply #24 on: December 01, 2008, 06:26:01 PM »

I had mine apart to fix the same problem a few months ago. I posted some pictures here. To get it apart you:
  • Pull out the bellows pins on the treble end, and take it off;
  • Take off the front grille;
  • Undo the two screws holding the keyboard on, and wiggle it gently off;
  • Release all the springs with a crochet hook, or something similar;
  • Undo all the small screws holding the pallets and key assembly on, and lift it off;
Then you can wiggle the long rod out that holds all the levers in place until you release the broken spring. Careful not to mix the springs up, as they are two slightly different sizes, or the levers. If you don't have a replacement spring, you can temporarily pinch one from the squeaky end, and block off the holes with a bit of tape. Put it all back together in reverse order.
A stress saving refinement.
Before pulling out the axle rod,unless you are nimble fingered, screw the assembly onto a piece of board for stability.
 As you pull out the rod "follow" it with a similar sized rod/wire until you reach the broken spring, leaving all the other levers and springs in situ on the temporary rod.
After replacing the defective spring work the rod back, keeping it in contact with the dummy one, picking up the "loose" levers and springs as you go.
Saves some tweezer work especially if the bad spring is in the middle
Logged

Accordion Dave

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
Re: pokerwork spring
« Reply #25 on: January 25, 2009, 05:27:09 PM »

Safety pins come in various sizes and types of metal. I have used these to replace broken springs on ancient accordions.
Logged

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: pokerwork spring
« Reply #26 on: January 25, 2009, 06:38:23 PM »

Something that occured to me the other day, having seen a photo of a spring winder. Can you make your own springs out of guitar/banjo strings? The spare bits from the end that you either cut off, wind up neatly, or leave to poke the next guy in the session in the eye. Or is it the wrong sort of steel.
Logged
Bill of Old Radipole Village

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: pokerwork spring
« Reply #27 on: January 25, 2009, 07:19:34 PM »

Probably fiond that instrument strings are too light a gauge.

Aero-modellers still use piano wire, which is relatvely cheap and available from model shops.  That would probably be a good place to start,
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: pokerwork spring
« Reply #28 on: January 25, 2009, 07:31:36 PM »

Hohner treble springs use two different wire thicknesses,  0.5mm for the inside row, and 0.55mm for the outside row.  One row 4-stop thicker again at (I think) 0.65mm.   Piano wire is ideal if you can find the correct thickness.  Guitar string is the right sort of steel, but its usually much thinner.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: pokerwork spring
« Reply #29 on: May 16, 2010, 10:03:15 AM »

Hohner treble springs use two different wire thicknesses,  0.5mm for the inside row, and 0.55mm for the outside row.  One row 4-stop thicker again at (I think) 0.65mm.   Piano wire is ideal if you can find the correct thickness.  Guitar string is the right sort of steel, but its usually much thinner.

Having got my 99p plastic vernier gauge from Wilkinson's, I can now measure my guitar strings. The E string inner steel wire is 0.5mm, just the right size for rolling your own. And there's enough spare on the end to make several springs.  ;D
Logged
Bill of Old Radipole Village

Lambo

  • New Starter
  • Offline Offline
  • Posts: 3
Re: pokerwork spring
« Reply #30 on: May 23, 2010, 01:59:57 PM »

Safety pins come in various sizes and types of metal. I have used these to replace broken springs on ancient accordions.
I've used a safety-pin on my pokerwork - still going strong after 5 years - what's wrong with safety-pins?
Logged
Pete

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: pokerwork spring
« Reply #31 on: May 23, 2010, 04:49:19 PM »

Safety pins come in various sizes and types of metal. I have used these to replace broken springs on ancient accordions.
I used several to replace bass springs on my Oakwood in its first few months. The remaining bass springs and the safety pin replacements haven't failed for over ten years.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Petave

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: pokerwork spring
« Reply #32 on: June 13, 2010, 05:38:00 PM »

Hi, Just bought my first melodeon Hohner HA114A 4 stop in G on Ebay appears to be !950 60S. Had to take it apart
It has "H" reeds on the treble and mixed "H" & "T" on the base. I broke a spring on one of the base spoons. I removed the pin and made a spring from a guitar string. Saw on Youtube a springs made by hand by wrapping around a pin held in  piece wood. Worked fine made a new holding pin. If it happens again might try winding the spring on the lever itself.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: pokerwork spring
« Reply #33 on: June 13, 2010, 06:51:44 PM »

Saw on Youtube a springs made by hand by wrapping around a pin held in  piece wood.

Any chance of a link to that?
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: pokerwork spring
« Reply #34 on: June 13, 2010, 09:20:07 PM »

Also on Bernard Loffet's web site:
http://diato.org/trucs/fabr_ressorts/image001.htm
« Last Edit: June 13, 2010, 09:22:24 PM by québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

plasteraccordion

  • New Starter
  • Offline Offline
  • Posts: 2
Re: pokerwork spring
« Reply #35 on: June 16, 2010, 03:35:26 AM »

You just need to get a good caliper- get the gauge of wire- then you can make it yourself- piano wire works- good luck- just fixed one myself-
steve
Logged

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: pokerwork spring
« Reply #36 on: June 17, 2010, 05:02:51 AM »

Factory replacement springs are easily available in the US. I imagine Theo and others keep them on hand too. It's probably not a bad idea to keep a few spares on hand just in case. I've never had a reed or spring break on me in any make accordion, although my dad had a spring break in his Corso when it was about 2 years old.
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: pokerwork spring
« Reply #37 on: June 17, 2010, 08:33:41 AM »

Yes I do keep them too.  Hohner Erica/Pokerwork use two different strengths of spring on the treble side, one is .5mm the other .55mm thick.  The heavier springs are used on the outside row where the longer levers mean that to the player the buttons have the same feel.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: pokerwork spring
« Reply #38 on: June 17, 2010, 03:08:41 PM »

I believe Charlie Marshall (CGM Musical) sell boxes containing an assortment of springs, also coils you can cut and shape to the size you need.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

docEdock

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
  • Hohners, Gaillards, Castagnaris
    • LoafingAboard
Re: pokerwork spring
« Reply #39 on: November 17, 2011, 02:01:05 AM »

I just received replacement springs for the inside and outside rows from the Button Box in the USA at a cost of $0.17 USD per spring. The Button Box sales person (Jeff) was knowledgeable and the springs arrived in a couple of days. They would have sold me just one spring but I splurged and bought five of each.

I stumbled across this thread -- yeah my Pokerwork busted a spring -- and although a rubber band or a safety pin might have done, it turned out that getting the springs here in the states was cheap and easy.

Oddly I couldn't find a YouTube video showing how to replace the springs. Anyone know of pictures or video in addition to Loffet's excellent pictorial walk-thru?
Logged
How difficult can it be?
http://loafingaboard.blogspot.com/
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal