Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Squeaky bass button on Liliput  (Read 5801 times)

0 Members and 1 Guest are viewing this topic.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Squeaky bass button on Liliput
« on: November 29, 2012, 12:47:20 PM »

One of my Liliput bass buttons squeaks a little. It's the button rubbing against the hole, not the internal mechanism.

I imagine the some sort of lubricant will fix the problem. Any recommendations? The noise is from the plastic button rubbing against the wooden  sides of the hole it sits in, so any lubricant would need to be kind to these respective materials.

Logged
Harmonica Player
Just starting with the Box

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Squeaky bass button on Liliput
« Reply #1 on: November 29, 2012, 12:54:18 PM »

Don't be tempted to use any sort of liquid lube, it will just trap dirt.  Graphite is the easiest to use in the form of a soft pencil rubbed on the area, also see if there is any scope for getting the button into better alignment with the hole.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Squeaky bass button on Liliput
« Reply #2 on: November 29, 2012, 09:05:47 PM »

As Theo said, soft pencil like a 4b . Provably need to go to an art shop for one but try a big branch of wh Smith's. Soap would also work.
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Squeaky bass button on Liliput
« Reply #3 on: November 29, 2012, 10:27:47 PM »

Soap might stop the noise but it is sticky and dust will build up on it.  Also a danger that you will start blowing bubbles if playing on damp conditions.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Squeaky bass button on Liliput
« Reply #4 on: November 29, 2012, 10:29:56 PM »

Good name for a song  :D
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Squeaky bass button on Liliput
« Reply #5 on: November 29, 2012, 10:45:23 PM »

You can get little bottles of graphite powder from a locksmith's. Cured my Liliput bass squeak.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Squeaky bass button on Liliput
« Reply #6 on: November 29, 2012, 11:32:03 PM »

I think a physical cure like bending the wire or filing the hole just enough would be preferable for me. Lubrication only masks the problem and is only temporary at best.
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Squeaky bass button on Liliput
« Reply #7 on: November 30, 2012, 10:01:03 AM »

I have a similar problem on my Erica. I think the angle at which I hit the buttons might have a bearing.

Someone suggested using strips of thin, cheap stick-on felt on the bellows side of the hole to reduce the lateral movement and quieten the impact, but I have yet to try this. (The pallet clack needs sorting first!)
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Squeaky bass button on Liliput
« Reply #8 on: November 30, 2012, 10:08:08 AM »

I have a similar problem on my Erica. I think the angle at which I hit the buttons might have a bearing.

I have the same problem with my Erica bass buttons. If I deliberately try to play the buttons straight down they are quiet, but when I play my normal, comfortable way, whereby my fingers hit at an angle, then I get quite a clack off the button hitting the side of the hole. I am sure I have seen pictures of Hohner bass holes sleeved with felt, which should cure this.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Squeaky bass button on Liliput
« Reply #9 on: November 30, 2012, 10:32:52 AM »

But then you lose the free percussion !  ;)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Squeaky bass button on Liliput
« Reply #10 on: November 30, 2012, 10:39:20 AM »

I have the same problem with my Erica bass buttons. If I deliberately try to play the buttons straight down they are quiet, but when I play my normal, comfortable way, whereby my fingers hit at an angle, then I get quite a clack off the button hitting the side of the hole. I am sure I have seen pictures of Hohner bass holes sleeved with felt, which should cure this.

Believe it or not, the Morino Club is the same , the mech and pallets are silent, the MOP buttons hitting the side of the Holes makes the noise ......... Hohner WILL be HOHNER no matter how high end they try to be  ::)
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Squeaky bass button on Liliput
« Reply #11 on: November 30, 2012, 11:42:31 AM »

One of the "Lester's Melodeon Emporium and Tune-a-Rama Pokerwork/Erica Refurb Options" is to have the bass buttons bushed, makes far more difference to the bass clackiness than refacing the pallets.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Squeaky bass button on Liliput
« Reply #12 on: November 30, 2012, 12:00:20 PM »

Good name for a song  :D

Yes it is....."Damp Conditions" should be ready to play in a day or two......... :||:

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Squeaky bass button on Liliput
« Reply #13 on: November 30, 2012, 12:14:34 PM »

One of the "Lester's Melodeon Emporium and Tune-a-Rama Pokerwork/Erica Refurb Options" is to have the bass buttons bushed, makes far more difference to the bass clackiness than refacing the pallets.
I understood from Theo that bushing an Erica is more involved than bushing a Pokerwork/2915. I have a pressed wood that I will have a go at myself, but I'm not sure what I want to do on the (otherwise still playable!) Erica. Not a big issue at present since I mostly play the Liliput.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Squeaky bass button on Liliput
« Reply #14 on: November 30, 2012, 12:41:16 PM »

The main technical thing about bushing bass buttons is to enlarge the hole and end up with a neat clean finish.  You need a reamer really, though I have done it with a round file.  A drill won't do.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Squeaky bass button on Liliput
« Reply #15 on: November 30, 2012, 12:51:36 PM »

The main technical thing about bushing bass buttons is to enlarge the hole and end up with a neat clean finish.  You need a reamer really, though I have done it with a round file.  A drill won't do.

+1  Additionally I put masking tape over the celluloid to protect it.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Squeaky bass button on Liliput
« Reply #16 on: November 30, 2012, 01:24:42 PM »

I have a taper reamer which I believe, from past posts, will do the job.

I suppose I ought to do it, because the assorted percussion from the basses is what put me off learning to play them for a long time. Really distracting, although the level is not untypical for Hohner. Strig's Liliput comes close!

I don't know how the celluloid cuts, whether chipping would be an issue but I guess a slow cut from the top would get a clean edge.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Squeaky bass button on Liliput
« Reply #17 on: November 30, 2012, 02:10:56 PM »

I don't know how the celluloid cuts, whether chipping would be an issue but I guess a slow cut from the top would get a clean edge.

Apply masking tape to reduce chances of chipping, cut slowly, have felt that matches the celluloid to hide any minor imperfections.

Plus use proper bushing felt, cut on the bias for successful results.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Squeaky bass button on Liliput
« Reply #18 on: November 30, 2012, 02:50:09 PM »

Celluloid cuts very nicely, less likely to chip than wood is to splinter.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Squeaky bass button on Liliput
« Reply #19 on: November 30, 2012, 05:21:29 PM »

Thanks Theo. I've ben wary of reaming my Club II and my Black Pearl III so I can felt the holes, you've now given me the confidence to give it a go!
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal