Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: .  (Read 1943 times)

0 Members and 1 Guest are viewing this topic.

aradru

  • Member
  • *
  • Offline Offline
  • Posts: 42
.
« on: November 29, 2012, 06:40:43 PM »

.
« Last Edit: October 13, 2015, 01:19:20 AM by . »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Another retuning question.
« Reply #1 on: November 29, 2012, 06:55:02 PM »

That would certainly be acceptable on steel reeds - not so sure about brass reeds, they're above my pay grade  (:)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Another retuning question.
« Reply #2 on: November 29, 2012, 09:00:21 PM »

Depends on how much the box cost you. If it's cheap then try it starting either the dusty  end;-)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Another retuning question.
« Reply #3 on: November 30, 2012, 01:17:05 AM »

Best advice is to proceed in a slow and steady manner - full focus, no extraneous distractions and everything should go swimmingly.
Fingers crossed and good luck.
Stay in touch on this one and keep us up to date on every stroke of the file  ;D
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Another retuning question.
« Reply #4 on: December 02, 2012, 12:44:13 PM »

Take it gently, it's not hard to make a much deeper scratch than intended in a brass reed.  The only reed I ever tuned was on a student model concertina and it was more a case of rubbing than scraping!

Rob.
Logged

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Another retuning question.
« Reply #5 on: December 02, 2012, 02:51:31 PM »

I have not ventured into accordion retuning but have altered brass reeded (as most are) harmonicas, including minor tweaks - just intonation to even temperament and major changes - 2 semitone raise on one reed to Paddy Richterise. I would not think the brass would be a particular problem compared with steel, but obviously a big job.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal