Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Plugging in an accordion  (Read 3938 times)

0 Members and 1 Guest are viewing this topic.

sandwich

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Plugging in an accordion
« on: November 30, 2012, 10:20:13 PM »

Is it possible to convert an accordion from acoustic to electric so that headphones can be plugged in and it doesn't emit any sounds other than the usual button clicking? If so, is this a relatively normal and inexpensive procedure?  :o
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Plugging in an accordion
« Reply #1 on: November 30, 2012, 10:26:38 PM »

Is it possible to convert an accordion from acoustic to electric so that headphones can be plugged in and it doesn't emit any sounds other than the usual button clicking?
Yes
Quote
If so, is this a relatively normal and inexpensive procedure?  :o
No

But you could buy a Roland FR18

sandwich

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Re: Plugging in an accordion
« Reply #2 on: November 30, 2012, 10:40:01 PM »

Level with me, Lester. What are we talking here in cost to convert an cheap old 2 row into something I can in the back room at all hours of the night? Don't hold back.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Plugging in an accordion
« Reply #3 on: November 30, 2012, 10:46:24 PM »

Level with me, Lester. What are we talking here in cost to convert an cheap old 2 row into something I can in the back room at all hours of the night? Don't hold back.

Not really a DIY job, it would need a switch for each key (~29) plus a sensor for bellows direction and bellows pressure; having got all this input data you would then need some sort of processing to take the switch data apply the variables from the bellows sensors and then apply the result to a sound generator. Then an amplifier.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Plugging in an accordion
« Reply #4 on: November 30, 2012, 10:47:36 PM »

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Plugging in an accordion
« Reply #5 on: November 30, 2012, 11:31:33 PM »

There is also the much cheaper Zen model. Simply remove all the reeds then imagine the notes.
The Sainted Mrs Wesson plays one of these and I am able to remain asleep throughout.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Plugging in an accordion
« Reply #6 on: December 01, 2012, 08:46:26 AM »



Not really a DIY job, it would need a switch for each key (~29) plus a sensor for bellows direction and bellows pressure; having got all this input data you would then need some sort of processing to take the switch data apply the variables from the bellows sensors and then apply the result to a sound generator. Then an amplifier.
[/quote]

Lester I don't think I understand this. How would you stop the reeds sounding. Are they disabled or removed. Where would the electronic sound come from?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Plugging in an accordion
« Reply #7 on: December 01, 2012, 08:59:36 AM »

It might be possible to bypass or block the reeds with an air valve or two. By adding switches to the levers one could perhaps keep the functionality. But removing them would be easier.

The "sound generator" would provide the sound - these days it would most likely be a microcontroller of some sort.

An interesting project if you're into firmware development, or have a lot of long evenings and a limited social life, but it has already been done.
I have a feeling it has been described either here or on concertina.net in the past also, in moderate detail.

Best to practice on a PA. Then it doesn't matter if you get it wrong  >:E
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Plugging in an accordion
« Reply #8 on: December 01, 2012, 09:05:33 AM »



Not really a DIY job, it would need a switch for each key (~29) plus a sensor for bellows direction and bellows pressure; having got all this input data you would then need some sort of processing to take the switch data apply the variables from the bellows sensors and then apply the result to a sound generator. Then an amplifier.

Lester I don't think I understand this. How would you stop the reeds sounding. Are they disabled or removed. Where would the electronic sound come from?
[/quote]

Take the reed blocks out

But this is really a non-starter of a project unless you have electronics, programming, wood working skills to hand.

Here is a kit to midi-fy a melodeon but requires a midi sound generator of some sort


Remember folks Google is Your Friend   (:)

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Plugging in an accordion
« Reply #9 on: December 01, 2012, 09:07:05 AM »

<snip>
The Sainted Mrs Wesson
</snip>

Dear Mr Wesson

Our client holds copyright on the term The Sainted Mrs so please cease and desist from using the term with out paying royalties.

Yours sincerely

Grabbit and Run
Solicitors and Commissioners for Oaths
« Last Edit: December 01, 2012, 09:09:13 AM by Lester »
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Plugging in an accordion
« Reply #10 on: December 01, 2012, 09:19:07 AM »

Not sure that Hallelujah Al hasn't pipped you on that one, Lester.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Plugging in an accordion
« Reply #11 on: December 01, 2012, 09:25:27 AM »

Not sure that Hallelujah Al hasn't pipped you on that one, Lester.

The first usage of TSMB on this forum was December 17, 2008 beating Al by 6 months, Actually!   (:)

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Plugging in an accordion
« Reply #12 on: December 01, 2012, 09:36:41 AM »



Grabbit and Run
Solicitors and Commissioners for Oaths
[/quote]

Associates and consultants for Hassle, Bellows and Reed
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Online Online
  • Posts: 325
Re: Plugging in an accordion
« Reply #13 on: December 01, 2012, 10:13:41 AM »


Here is a kit to midi-fy a melodeon but requires a midi sound generator of some sort


A quick look at the circuit sugest a minor flaw in this design. The bellows switch is either pull or push. No option for no pressure. Theres no expression option either , midi velocity set to max.  It might be a good starting point still. There apears to be a few spare analogue lines in to the controller that might be used for bellows pressure sensing with a few software changes.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Plugging in an accordion
« Reply #14 on: December 01, 2012, 01:50:15 PM »

<snip>
The Sainted Mrs Wesson
</snip>

Dear Mr Wesson

Our client holds copyright on the term The Sainted Mrs so please cease and desist from using the term with out paying royalties.

Yours sincerely

Grabbit and Run
Solicitors and Commissioners for Oaths

Lend us a fiver  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Plugging in an accordion
« Reply #15 on: December 01, 2012, 02:00:05 PM »

Not sure that Hallelujah Al hasn't pipped you on that one, Lester.

The first usage of TSMB on this forum was December 17, 2008 beating Al by 6 months, Actually!   (:)

Yeah but he`s a Worship leader of the Salvation Army, that`s Almost a Vicar so I`m afraid that Copyright defers to him on Ecumenical principles
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Plugging in an accordion
« Reply #16 on: December 01, 2012, 02:14:10 PM »

Lester's attempt to "Copyright" a common turn of phrase reminds me of the typically US patent for the use of a screen to display data - in theory they could prevent all the computers, iphones and the rest of the modern crap that makes pubs boring outside of sessions.  Strange to say, they've never tried to sue anyone for this breach of copyright.  I managed to stop someone from getting a damned ipad out in the middle of a discussion in our local - can't they see that if every fact is confirmed or denied there's no scope left for discussion?

Rob.
Currently warming his thermals for an evening Morris...
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Plugging in an accordion
« Reply #17 on: December 01, 2012, 09:42:50 PM »

Lester's attempt to "Copyright" a common turn of phrase reminds me of the typically US patent for the use of a screen to display data - in theory they could prevent all the computers, iphones and the rest of the modern crap that makes pubs boring outside of sessions.  Strange to say, they've never tried to sue anyone for this breach of copyright.  I managed to stop someone from getting a damned ipad out in the middle of a discussion in our local - can't they see that if every fact is confirmed or denied there's no scope left for discussion?

Rob.
Currently warming his thermals for an evening Morris...

Fully agree, 'specially for us 12 year olds
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal