Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Effect of numbers of reeds on the "harmony table"  (Read 1325 times)

0 Members and 1 Guest are viewing this topic.

Jack Humphreys

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • tunesbyjackhumphreys
Effect of numbers of reeds on the "harmony table"
« on: December 03, 2012, 02:00:00 PM »

Query for our resident acoustician, Ukebert, probably...

Just been reading Bernard Loffet here
http://diato.org/trucs/armoires.htm#1
He's saying that the more reeds on the "harmony table"  (I've forgotten the English term)   the less powerful any one reed will be. He says that having, say, a third rank  of reeds inside, will load up the "table". That means that a 2 voice will sound better/more strongly than a three-voice with only two voices turned on.
Seems very sensible and logical.

But I had vaguely understood from Owen /ukebert  that the sound comes predominantly from the air going through the reed....with very little contribution from resonance via  the "table". ...  So puzzled.


Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Effect of numbers of reeds on the "harmony table"
« Reply #1 on: December 03, 2012, 07:08:36 PM »

The harmony table refers to the soundboard.

Firstly as many have mentioned, the soundboard does *not* resonate and if it did it would be a bad thing. What it does do is vibrate.

Imagine a sheet of wood with a little stick attached to it, which wiggles up and down at any frequency. The amount that the sheet vibrates is different for different frequencies and there are some frequencies where it moves a lot. This is called resonance. But just because the soundboard isn't resonating doesn't mean that it isn't vibrating - it is.

In the case of a soundboard, one with lots of free space will vibrate more than one which is covered with reedblocks. I am not sure exactly the effect that this will have, because I haven't done any testing on a soundboard. But I would think that the soundboard vibrating and therefore taking energy away from the reed, would mean a more rounded, less harsh sound. Which isn't what Bernard states.

My own theory is that it is the extra reeds which matter, more than the soundboard. Induce a reed to vibrate and you are taking energy away not from the reed, but from the air, i.e. absorbing the sound of the box. Having a set of blocked off reeds means that they will take energy away from the box, being a set of tuned mass dampers. In the case of the L reed this has advantages, means that you get a delightfully mellow bassoon sound. But for MM on an LMM box, it could severely reduce the punch. So I'd say that the thing to do is to have the bass reeds facing away from the middle reeds and to varnish any exposed wood in the cavity.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Effect of numbers of reeds on the "harmony table"
« Reply #2 on: December 03, 2012, 09:25:33 PM »

I would throw in an observation, unproven in scientific experiments that I am aware of, that boxes with aluminium action boards have a notably brighter tone. Resonance or just different frequency response? There does seem to be a usefull difference. It may just be that builders using this method to make lighter boxes also put more effort in to other areas influencing the tone.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Effect of numbers of reeds on the "harmony table"
« Reply #3 on: December 03, 2012, 09:30:16 PM »

I think they used aluminium for soundboards because it didn`t warp and cause leaks - the soundboard is the hardest part to replace on an accordion
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Jack Humphreys

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • tunesbyjackhumphreys
Re: Effect of numbers of reeds on the "harmony table"
« Reply #4 on: December 08, 2012, 10:22:48 AM »

Thanks for the explanation, Owen.  :Ph  I wonder if any melnetters have tried varnishing their insides yet. 
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal