Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?  (Read 8216 times)

0 Members and 1 Guest are viewing this topic.

cajunfid

  • Member
  • *
  • Offline Offline
  • Posts: 18

Larry seems to be the most adamant Cajun maker when it comes to not wanting his box owners to use the stops in any fashion other than for tuning. I have always found that the stops on his accordions are almost always next to impossible to move up and down. I think he engineers them this way to discourage beginners from having the option of moving the stops.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #1 on: December 12, 2012, 01:36:53 AM »


Sounds like these "cajun makers" never want to hear from you again once
they have sold you their instrument.

Aradru, that's a bit of a generalized statement based on very little info.  I see no reason the stops can't be used, but also don't see any reason to close them after each session like some folks like to do.

Daveorr, if you look in the sound hole under the valve, you should be able to tell if it has slides.  I doubt if Larry made very many without slides, if any.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #2 on: December 12, 2012, 01:58:39 AM »



Aradru, that's a bit of a generalized statement based on very little info.  I see no reason the stops can't be used, but also don't see any reason to close them after each session like some folks like to do.



Bryan, I get it that the tradition of cajun accordion building grew up as a sort of home-made folk craft, based partly on models of accordions like the Monarch that were actually made in factories, but with its own unique features and compromises based on what could be done in a small shop . . . and also that the humid climate might make it tricky to have wooden slides that slide easily, but are still airtight. 

But some folks do like to use the stops to get different combinations of reeds.  This has been hard to achieve on a few cajun boxes I've played because the slides seem frozen.  Maybe they were made that way or maybe they swelled shut over time.

In answer to your comment above, I can think of at least one good reason to push in the stops when you are done playing.  With the stops down there's less chance the metal rods will get bent if the box is dropped or banged into something.  Yes, I've definitely seen bent stops.  Also the case could be made a little smaller if the stops are closed up when the accordion's put away. Maybe that's why some modern boxes with stops, like my LMMH Saltarelle 2-row box, have the stops "on" when they're pushed down.

On the other hand I appreciate some boxes (including 4-reed 1-row boxes) with no stops or sliders, just everything all the time.  Nothing wrong with that but then you can leave off the stops and sliders, less work and expense and maybe even a better coupling of the reedblocks to the soundboard.

PG
« Last Edit: December 12, 2012, 02:04:05 AM by pgroff »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #3 on: December 12, 2012, 02:14:24 AM »


Why not just stick some duds on and be done with it?
Sounds like some people would be happy with this and it would mean a maker
could offer a better price.

I actually did that on a couple, just to see if there was much of a difference.  It's a little less work in construction, but it's almost made up by the fact that it is a little more work to tune.  I have one personal box with no slides, and I miss the slides.  I don't find it too hard to make and fit slides, but I'd much rather tune with slides than without. 

Paul, guess so, and well made slides should last a long time, but if made with wood like most of us do, it is a wearable part.  If a rod gets bent, it's easy to replace (though I assume if the rod is bent the hole is probably enlarged?), if slides need to be replaced, that's a job.  Of course, there's simple remedies for loose slides other than replacing.  Don't misunderstand me, though, I would never caution a person not to use the slides, just don't think they should be used any more than absolutely necessary.

Good topic, and maybe deserving of it's own thread.

On the wood of the accordion, can you post a better pic?  Sure looks like what I would call burl walnut from what little I can see.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #4 on: December 12, 2012, 07:12:25 AM »


I actually did that on a couple, just to see if there was much of a difference.  It's a little less work in construction, but it's almost made up by the fact that it is a little more work to tune.  I have one personal box with no slides, and I miss the slides.  I don't find it too hard to make and fit slides, but I'd much rather tune with slides than without. 


Bryan, Good point.  The 4-reed Irish-American 1-row boxes usually have 2 removable A-frame reedblocks.  When there's no slides and the reedblocks are glued in place, do you use masking tape on the outside of the soundboard, under the pallets, to select one rank of reeds at a time?

PG
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #5 on: December 12, 2012, 08:19:39 AM »

Good topic, and maybe deserving of it's own thread.

And here it is (:)
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #6 on: December 12, 2012, 05:45:53 PM »

When there's no slides and the reedblocks are glued in place, do you use masking tape on the outside of the soundboard, under the pallets, to select one rank of reeds at a time?

PG

That is what I do, Paul.  Works, but after initial tuning of each bank, I like to close various banks to hear 2 or 3 banks at a time in relation to each other for final tuning, that's where I start really missing the stops, also for finding an errant reed.

Aradru, I've only done one for a customer, and he doesn't use stops so he didn't care.  I removed the stops from one of my personal ones, and a renovated H114 (surgical test dummy). Good thing about mine and the 114 is I got to hear them with and without slides.  My impression was the sound is slightly louder, and sharper and clearer, without the stops. I imagine some people, especially in genres other than Cajun, would like that sharp clear sound, I kinda prefer the deeper guttural sound they had with the slides.  My reed blocks are glued in either way, with 2 up and 2 laying down.

Very curious if any others have impressions of with or without stops.

Johnf

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #7 on: December 12, 2012, 07:35:41 PM »

Louisiana made cajun boxes have glued in reed blocks and the slides help tremendously when tuning. Marc Savoy has a video that shows his tuning methods and he definitely must use the slides when tuning.
From being around various Louisiana/Texas Cajun/Creole players over the years I have observed their habits in regards playing is concerned. All slides are almost always left open when playing. There are some exceptions with blues where some players close the high reed. I NEVER see players pushing the slides in when putting the instrument in a case. They are held open with friction and players like them tight so they don't close by themselves. The slides are wooden and "hand-made". If they get loose, you melt a bit of wax into the rod guide to tighten it up. My box had a loose slide at one time and that is what the builder told me to do. 
I have always wondered why they don't build the accordions so you have to pull the slide out to close a reed bank instead of pushing it in.
Logged
Austin Texas
C "LeCapitaine"
B/C "Double Ray"
Mandolin
Pennywhistle

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #8 on: December 12, 2012, 07:44:27 PM »

Something that I've always wondered, if the stops on a 1 row are almost always "on" then why isn't the "on" position with the stop down rather than up as it usually is?. ???

...then again, clothes peg and elastic band manufacturers would be hit hard by the loss of the Hohner 114 market...

*edit*...missed that last sentence above...
« Last Edit: December 12, 2012, 07:50:59 PM by Andy Simpson »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #9 on: December 12, 2012, 07:53:18 PM »

Something that I've always wondered, if the stops on a 1 row are almost always "on" then why isn't the "on" position with the stop down rather than up as it usually is?. ???

...then again, clothes peg and elastic band manufacturers would be hit hard by the loss of the Hohner 114 market...

*edit*...missed that last sentence above...

Andy, and Johnf who made a similar point, there are boxes whose stops work that way.  I seem to remember that the Weltmeister melodeons work "down = open" and as I mentioned above, so does my 4-stop LMMH 2-row Saltarelle Shamrock. 

PG
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #10 on: December 12, 2012, 10:28:25 PM »


Aradru, I've only done one for a customer, and he doesn't use stops so he didn't care. 


Did you put "dummy" stops on just for the aesthetics?


wonder what i could tell people who ask what do those things do? someone always does.
And you might get a gorilla (like me) ripping the top off your melodeon.

I have two one row four stops. Silvetta brand stops are down for open so slipping not a problem but I play with H reed off
then it can slip but doesn't much. My newer Beltuna has metal slides ( good idea!) it has little slot at base of slide that metal clips snap in to and out of with ease.  Have had no problems and can move them up and down till my hearts content (:) I also like how there seems to be a little adjustment nut at knob end to allow line up of slide to holes in sound board.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

The Blues Viking

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #11 on: December 13, 2012, 12:18:07 AM »

Something that I've always wondered, if the stops on a 1 row are almost always "on" then why isn't the "on" position with the stop down rather than up as it usually is?. ???

Most of the Chinese-made "Cajun" boxes work that way.

TBV
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #12 on: December 13, 2012, 01:05:12 AM »



Did you put "dummy" stops on just for the aesthetics?
Would it make sense to have a line of economy models without functioning stops?
Is there a market I wonder?

Yup, just for aesthetics, most Cajun's aren't much on change.  Most also seem to like picking up their box only by the stops, though that always makes me cringe.

Maybe someone might offer one without slides as an economy model, but like I said earlier, making and fitting slides isn't real hard and it makes tuning enough harder that it wouldn't be economy for me. I think Junior Martin did at one time, but I don't think he does anymore.

Regarding stops down to play, I wondered that also. Like everything else in the Cajun box, if the Sterlings and Monarchs had been made that way, that's the way Cajun boxes would be made today.  I can think of no good reason to have them up to play.  I made one by request with stops down to play.  Only possible drawback, and it's a small one, is the stop blocks help seal around the rod.

One thing I like is Olav Bergflodt's style of stops.  I also notice that as generous as he is with construction pics, there are none of his register system.  ;)

Johnf

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #13 on: December 13, 2012, 06:14:09 PM »

I think if you made a four voice single row without stops you would also have to install removeable reed blocks for tuning ease. 
I have also seen at least one box with dummy stops.

There is one maker who has designed a box that has two sets of reed blocks so you can change the key. Usually C and D. I forget the maker's name.
Logged
Austin Texas
C "LeCapitaine"
B/C "Double Ray"
Mandolin
Pennywhistle

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #14 on: December 13, 2012, 07:43:37 PM »

I think if you made a four voice single row without stops you would also have to install removeable reed blocks for tuning ease. 
 

You wouldn't have to, the masking tape thing is one way around it.  Even if you had removable reeds you'd have to have a way to block off the holes not being used.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #15 on: December 13, 2012, 11:31:26 PM »


There is one maker who has designed a box that has two sets of reed blocks so you can change the key. Usually C and D. I forget the maker's name.

I read about that on this forum (I think ) but can't find it now.
Can someone point the way please?

Weltmeister, Castagnari Max,  and I think the Hohner Ariette have removable reed blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #16 on: December 13, 2012, 11:43:21 PM »


There is one maker who has designed a box that has two sets of reed blocks so you can change the key. Usually C and D. I forget the maker's name.

I read about that on this forum (I think ) but can't find it now.
Can someone point the way please?

Weltmeister, Castagnari Max,  and I think the Hohner Ariette have removable reed blocks.

Theo, I think the question (though not precise) was intended to refer to cajun boxes with 6 stops in which you can use the stops to change the key -- for example, 3 sets in C, 3 sets in D.  I think Falcon has popularized (patented?) this idea, but we've talked about many examples past and present.

PG
Logged

fallonje

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #17 on: December 14, 2012, 02:43:56 AM »

I'm not positive but I think it was Randy Falcon who made a two key Cajun box.

I used to play guitar in a Cajun band with Tracy Schwarz who played Marc Savoy accordions. He had a tune or two where he would switch off the low reeds. Tracy's a pretty traditional kind of guy so I'm sure the idea must have come from some from old recordings or from someone he spent time with when he was living in Louisiana. It made for an interesting change in a long night of playing for dancers. I play a Beltuna Caju in D, mostly Irish and English, fairly dry tuned and use all combinations of LMMH for variety. I think the stops should be used.


Logged
Saltarelle Cheviot C#/D/G, Beltuna Melodeon in D

The Blues Viking

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #18 on: December 14, 2012, 02:45:01 AM »

I have also seen at least one box with dummy stops.

I was in Elderly Instruments years ago (I live near them) and had a try at a nice-looking Cajun they had on consignment. With four voices it sounded just fine, but then I tried the stops to try different reed block combinations. I tried pushing and pulling the stops for five minutes before I realized they were dummies.

I felt really stupid. Up till then, I had no idea anyone had ever done that.

TBV
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Using stops on a Cajun accordion. Split from: which wood in my Bon Cajun?
« Reply #19 on: December 14, 2012, 12:28:13 PM »

Randy Falcon does make dual key accordions, you use the stops to close off the key not being used.  He had a US patent on it, which has now expired. He is now making 3 key accordions, I guess somewhat as a novelty, but amplified, they sound surprisingly good.  Think he uses the H and L rows, but just guessing there.

There are a few songs in the Cajun repertoire where most players shut off the low bank, most are Cajunizations of bluesy songs, but Le Haricots Sont Pas Salé is an old traditional song played without the low bank.

What I've heard players doing in other genres is partially shutting off stops to get certain sounds.  Anyone here do that?
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal