Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed tuning workshops/demos  (Read 4760 times)

0 Members and 1 Guest are viewing this topic.

stillicidia

  • Member
  • *
  • Offline Offline
  • Posts: 26
Reed tuning workshops/demos
« on: November 30, 2008, 08:21:07 PM »

Hi all
I'm new to the forum and fascinated by all the information that is available here.
I was wondering if there is ever a reed tuning workshop or demonstration held anywhere.
I'm new to reed instruments but I've always been happy to strip and rebuild anything from car engines down over.
I've built a lot of instruments in my time and I'm very practical  ::)so stripping out reeds and cleaning/rewaxing them doesn't worry me but retuning does - being a practical sort of person I'm not one for reading up and having a go - I like to be shown and to be able to ask questions then watched to see if I'm doing the right thing - so hence the question where can i get some instruction on reed tuning please?
I live in Darlington - NE UK.
Logged
Dyslexic fingers and deaf as a post!
member of accordions anonymous - I admit it I am an accordion addict!
it all started with just one! just a little one! then another, and another...

Mike Higgins

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 338
    • Strolling to Italy
Re: Reed tuning workshops/demos
« Reply #1 on: November 30, 2008, 09:27:53 PM »

As you will have seen from an earlier post from me re  reeds, this would be right up my street too. Although it seems a lot to ask of people who have spent years getting these skills and who make a living from those skills.

Mike
Logged
Mike from Ponte Caffaro

stillicidia

  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: Reed tuning workshops/demos
« Reply #2 on: November 30, 2008, 09:44:52 PM »

I know there is always the dilemma of do you train someoneto do the job you do but I'll relate this to myself - I spent the last ten years as a harp maker it took most of the first five to get known enough to make a semi reasonable living from it - but there was always more demand for instruments than there were suppliers (except for the big factory makers) so if you wanted an instrument or a repair - you had to wait or give it a go yourself. I worked on the principle that if I taught twenty people how to make a quality insrtument, nineteen of them would make one - under my supervision - realise how hard it was and give up - one might give it a go realise how hard it was and do it as a hobby for themselves and  maybe one or two close friends.
Realistically there might have been one in a hundred who leant how to make an instrument and then went on to make another but they all went away knowing how to do the basics. Most of them would bring their instruuments back to me for anything other than tiny jobs - so it wasn't a case of doing myself out of a job and might have put one or two peeople on the road to building instruments in the future - since there are only really five or six makers in the Uk it needs someone to teach others if the instrument isn't going to dissapear.
Trying to find someone to tune a melodian or accordion seems to be a similar situation - I want to be able to do basic repairs for myself but I know if I needed a full tuning I wouldn't want to do it myself - I don't have the time or inclination.
But I would like to be able to sort the odd reed or do a small job myself but I really want to know what I should be doing rather than reading something and wrecking the reeds from not understanding something.
Richard
Logged
Dyslexic fingers and deaf as a post!
member of accordions anonymous - I admit it I am an accordion addict!
it all started with just one! just a little one! then another, and another...

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Reed tuning workshops/demos
« Reply #3 on: December 01, 2008, 06:06:57 PM »

Hello Richard, welcome to the forum. I know of no such workshop events or leisure courses in schools/colleges anywhere, although I'd be delighted to go along if there was one. Many years ago I did a couple of years leisure course on musical instrument making, the teacher being Martyn Banks of Oakwood Instruments who's been known to knock out the odd harp himself now and again. Martyn was very free with his knowledge and expertise; like you he realised that very very few people would even consider setting up as a maker in their own right and would probably fall by the wayside if they did.

Reed tuning is a bit too specific to have vast appeal as a festival workshop subject and too much equipment (sets of tuning bellows, tools, tuning meters etc) would be needed in order for the people attending it to 'have a go'; and can you imagine the din!

I only know three free reed instrument repairers/tuners personally (two of those are part-time!) and they all have something in common, they taught themselves by trial and error, researching, and picking other people's brains.

I'm have a dabble at tuning myself at the moment and to be honest the best way to learn is by having a go using some old box that you picked up cheap on ebay, then asking questions on here as you go along. First of all you'll need to pick up a set of bellows to build a tuning rig and make room for it in the corner of your workshop...

Pete.  :)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

stillicidia

  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: Reed tuning workshops/demos
« Reply #4 on: December 01, 2008, 06:57:14 PM »

Hi Pete
I was so impressed reading your posts about rebuilding that I've already done just as you suggested and bought myself an old Hohner student accordion -its 1937 and its going to need a lot of rebuild to get it right but thats what it is for - I've rebuilt a couple of old boxes before, fixing bellows and rewaxing reeds but never had the courage to start reed scraping in case it became reed scrapping!
So I thought I'd give it a go myself and see how I got on but I'm still not sure where to start scraping and where not to - thats the bit that worries me - so now I have about 100 reeds to have a go at and hope to get it right!
All of this is my way of trying to be able to keep my big box going until the day I can afford to get it professionally tuned - but since I work for a charity for a low wage that is going to be a long time coming - still not sure I dare ever have a go at doing that myself - with 4 voices in the trebble and 5 in the 120bass the thought itself terrifies me!
By the way - I saw that you just saw the idea of using the salon wax melter - have you or anyone else for that matter tried using a tjanting pen that is normally used for batik painting for pouring the wax?
they are easy to control and give a nice 0.5 to 1mm run depending on the size - just a thought - I'm going to give it a go on the little hohner.
Richard
Logged
Dyslexic fingers and deaf as a post!
member of accordions anonymous - I admit it I am an accordion addict!
it all started with just one! just a little one! then another, and another...

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Reed tuning workshops/demos
« Reply #5 on: December 01, 2008, 10:55:53 PM »

Well if I were you I'd tackle everything but the tuning first, that gives you time to ponder and absorb as much collective knowledge about the tuning process as you can. The scratcher is only used at the bottom of the reed to flatten the note; if the reed needs sharpening you'll need to file the tip of the reed. When I say file I mean something with a very fine cut indeed, I've not used files as such at all just fine abrasive belts on a detail sanding pen from Axminster Tools.

It's more a case of polishing than filing, slow work but it makes it a lot harder to make a complete pigs ear of it. In your case it's just a matter of adjusting the existing tuning rather than making drastic changes as I have; I won't be trying that again! (or at least I would approach it in an entirely different way).

Batik pens sound quite interesting but to be honest I'll probably stick to the tool I have and continue to melt wax in a poaching pan for the rare occasions I'll be using them in future.

I've seen the innards of a 120 bass PA and I can assure you that I wouldn't even attempt to work on one, that what Theo's there for. ;D

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tuning workshops/demos
« Reply #6 on: December 17, 2008, 11:41:52 PM »

The East Anglian Traditional Music Trust is holding a one day melodeon maintenance workshop at Mendlesham, Sufolk on Sunday 29 March 2009.  Contact Katie Howson at EATMT for details.  Tutors for the day will be some characters called Rees and Theo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

stillicidia

  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: Reed tuning workshops/demos
« Reply #7 on: December 18, 2008, 07:49:16 AM »

Wow - thanks Theo  :) - now where on earth is Suffolk - would that be somewhere south of York - will I need a passport? ::)
Logged
Dyslexic fingers and deaf as a post!
member of accordions anonymous - I admit it I am an accordion addict!
it all started with just one! just a little one! then another, and another...

Fidjit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 538
    • my space on My Space
Re: Reed tuning workshops/demos
« Reply #8 on: December 26, 2008, 03:22:49 PM »

Look at the bottom of this page. you'll see all the relevant information.

http://www.eatmt.org.uk/melodeons_in_mid_suffolk_&_more.htm#Melodeons%20and%20More%202009
Logged

Viljo

  • Member
  • *
  • Offline Offline
  • Posts: 23
    • Vapaalehdykkä
Re: Reed tuning workshops/demos
« Reply #9 on: December 30, 2008, 05:48:11 PM »

I just have to say that here in Finland anybody can seek to Ikaalinen College of Crafts and Design and study accordion repair and manufacturing. Normally it takes 2,5-4 years to come accordion manufacture artisan. I finished my studies 2 weeks ago and now I am putting up my own workshop in Naantali (Near Turku, south-west coast). Accordion manufacture school can be found also in Klingenthal Germany. I found couple weeks ago that somewhere in Midwest is a museum and some kind of accordion school (in the same building?). I try to find link for you; can't remember everything.

Every summer in Ikaalinen College of Crafts and Design is so called accordion summer course where people can come learn different accordion issues. Course is 4-5 days and it costs something..

And even I make lectures about accordion history, its mechanics, repair etc...

Well... at least in Finland accordion issues are in good shape.
Logged
With warm regards,
Viljo

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Reed tuning workshops/demos
« Reply #10 on: December 30, 2008, 11:43:12 PM »

That would be "World of Accordions Museum", along with their repair and technicians' school. It's in Superior, Wisconsin, at the southwest tip of Lake Superior, about two hours drive from where I live.

Sorry to report that I have not yet been there to visit, as their hours are rather spotty. I pass nearby when on the way to summer holiday farther up north, but then they're closed on weekends. Looks like a very interesting place, though, and I must try to arrange a visit. Here's the link:

http://accordionworld.org/

Bob



Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal