Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Which side?  (Read 6467 times)

0 Members and 1 Guest are viewing this topic.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Which side?
« Reply #20 on: December 24, 2012, 06:46:44 PM »

I think what really bothers me about the dremel, is I liken them to routers.  I have proven several times that with high speed rotary bits, no matter how careful you are, and no matter how lucky you've been, a disproportionate amount of damage can very quickly be done with one slip.  Routers have enabled me to destroy nice wood in the blink of an eye, and I can only assumed I have the same capability with a Dremel on a nice reed.

That's exactly my feeling; I do use a router on wood fairly often, and I have a good quality Bosch machine, a good router table and a fair amount of experience - and I still have a higher-than-I-would-like reject rate.  I don't want to revive any pre-1776 feelings, but it does seem to me that proponents of power tools for tuning tend to be from the western side of the Atlantic (my evidence for this, I have to say, is largely YouTube-based, and I happily acknowledge that Bryan is the exception that proves my rule!) and the hand-tool supporters mainly from this side of the Pond. I own a Dremel which I use frequently for jobs at which it excels - tuning melodeon reeds isn't one of them, I'm afraid. Maybe it's me: if it works for you, go for it!

Merry Christmas (or midwinter festival of your choice) everyone.

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Which side?
« Reply #21 on: December 24, 2012, 07:35:00 PM »

Good point (Lester's) about "good quality" files.

The best Swiss tools are a good (and probably as fast) as power stuff.

Chris LDD makes a good point: if you ever get a chance to try air driven precision hand tools, they are so instant in acceleration/deceleration that they assist in control more than you would think.  There is basically no mass to the tool, so the spool up/spool down is shockingly fast.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Which side?
« Reply #22 on: December 24, 2012, 10:21:33 PM »

I have recently treated myself to a decent swiss file (from Axminsters) as recommended by Theo. Much prefer it to a dremel having tried them both.

Is the saw file the one recommended?  There are many many different files with different size teeth.....single cut, double cut, etc.
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Which side?
« Reply #23 on: December 25, 2012, 12:39:31 PM »

Has anyone tried one of Charlie's diamond files? I have one (as of this morning  ;D ) and it seems a bit fierce  :o
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Which side?
« Reply #24 on: December 25, 2012, 04:01:36 PM »

Has anyone tried one of Charlie's diamond files? I have one (as of this morning  ;D ) and it seems a bit fierce  :o
Yes, I have one and I agree it is rather coarse for my liking. I generally restrict my use of it to gentle pull strokes only. I think the red handle indicates that it is 200 grade grit size. I think that 400 or even 800 grade grit would be better. Charlie doesn't stock these as far as I know but you can get them here.




Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Which side?
« Reply #25 on: December 25, 2012, 05:27:13 PM »

Dremmels etc have been discussed in the past but amongst the pros (with one notable exception) there seems to be a consensus that power tools for tuning in general are a bad thing!

As an amateur I would be loathe to take tools like that to decent reeds.

Yes, a tool designed to remove very precise amounts of tooth is bound to be a reckless hazard on a steel reed tongue. ::)

I think if you look back to the post I was replying to the phrase "I’ve been experimenting with the jewellers’ equivalent of an air driven dentist’s drill (GRS 850a) for the tuning of reeds." was used.

No reference to actual dental tools were made until after my post.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Which side?
« Reply #26 on: December 25, 2012, 05:38:13 PM »

I'm sure it's a terrific tool to play with, but you can buy an awful lot of files - and have change for a few Dremels - for what these babies cost  :o. 

If you happen to have one lying around, and a good stock of gash reeds to develop your skills, it might be a good option and I'd be interested to hear how you get on.

In the meanwhile I'll be putting in an order with Axminster ;D
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Which side?
« Reply #27 on: December 25, 2012, 05:53:52 PM »

I'm sure it's a terrific tool to play with, but you can buy an awful lot of files - and have change for a few Dremels - for what these babies cost  :o.

Quite so. In a quick peruse I could only find the GRS 850 model, that was $480 for the hand tool and one burr, goodness knows what the machine that drives it costs!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Which side?
« Reply #28 on: December 25, 2012, 11:05:27 PM »

My last post on the subject and I will shut up, but:

Especially now with most modern dental practices moving to high speed and high speed air turbine equipment, this is a great time to get what used to be considered to be "slow speed" equipment and an even better time (though with a bit of risk) to buy the Chinese rip-off of the slow speed equipment.

Even if you don't use it for tuning (and it seems like probably that is a good idea) they are great shop instruments and even the crappiest (dental) diamond burrs are better than anything you can get from your hobbiest or hardware shops.

Also want to put in a pitch (I promised this would be it) for endodontic files; these are the hand "drills" used to remove the tooth root. These can be had cheaply and can be had finer than the finest of fine files.  And they cut less material.

End of dental tirade.  Apologies. 
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Which side?
« Reply #29 on: December 25, 2012, 11:16:13 PM »

OK, well before you shut up completely  ;D what infrastructure do you need to get set up? Apparently some sort of air pump, maybe a foot switch controller, some plumbing and the drill head itself.
So any idea what kind of money a non-dentist would be looking at to get kitted up with basic "cast-off" or second-hand kit?


(Or what a UK based non-dentist should look for?)
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Which side?
« Reply #30 on: December 27, 2012, 03:13:18 PM »

Malcolm:  search for sites under "used dental equipment" or "cavitron" or "bobcat" to get a sense of what these tools are (some are "drills", some are "files" and some are "scratchers").

This will give you a list of the products (and their list prices!!!), then go look on your EU ebays where you will find them plus find similar knock offs.

These tools cost "thousands" but you should be able to find an older cavitron or chinese rip-off cavitron for 150 euros, an older bobcat (scaler>>scratcher) maybe for a bit less.

Most of the products for sale will include the compressor/power supply, foot switch, handpiece, etc.  The whole things are actually quite small.

You might even ask your dentist or hygenist the next time you get your teeth cleaned to "show you the ropes"; tell them what you are wanting to do and they will tell you what to look for.  Especially ask them to show you the difference between tools that "drill" and ones that "scratch" (scale).

No licenses or regulations preclude the public from buying/owning these equipment in the EU as long as you don't plan on using them an your children or dogs.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Which side?
« Reply #31 on: December 27, 2012, 05:04:33 PM »

No licenses or regulations preclude the public from buying/owning these equipment in the EU as long as you don't plan on using them an your children or dogs.

But it's OK to use them on horses, baboons or your neighbours?  ;D >:E
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Which side?
« Reply #32 on: December 27, 2012, 08:02:31 PM »

No licenses or regulations preclude the public from buying/owning these equipment in the EU as long as you don't plan on using them an your children or dogs.

But it's OK to use them on horses, baboons or your neighbours?  ;D >:E

Or preferably a Cat!!! Or three.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Which side?
« Reply #33 on: December 28, 2012, 01:37:26 PM »

Long history of dental torture, both intended and not-intended.... >:E
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

jonnwetzel

  • New Starter
  • Offline Offline
  • Posts: 1
Re: Which side?
« Reply #34 on: January 07, 2013, 05:43:15 AM »

As regards using dremel type tools, although I think they are not for me, there is one thing to consider for those that do go that route.  When lowering the pitch, it is very easy to create a stress/strain concentration with a touch of a dremel style rotating bit.  This means that keeping the bit moving is critical.  It also means that there is more danger when lowering the pitch than when raising it.  The tip is in no danger of breaking because it is not being cycled through compression and stretch cycles with each vibration.  My point is that, if I were to use such a tool myself, I would use it only to raise the pitch (only use it on the tip).

The really big problem with LOWERING the pitch with a dremel type tool is that it is easy to create a local stress concentration, but the results will show up months later, when metal fatigue does the reed in by creating a break at the site where a tool bit spent just a bit too much time.  Make the same gouge in the middle of the tip, most likely no problem.  So it takes the folks that use tools like this quite a while to get that they are shortening the lives of their customers reeds.  They may never learn, if their customers never come back because they can see what caused the reed to break.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal