Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Polishing Info  (Read 1609 times)

0 Members and 1 Guest are viewing this topic.

strad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 418
Polishing Info
« on: December 22, 2012, 03:51:43 PM »

I have long been a fan of "Micro-Mesh" as a finishing aid. It's used in the aviation industry for getting scratches out of plane windows. I have used it for final polishing  of a fiddle plate I was doing up. The grit is in stages between 2000 and 12000, and gives a glass like finish. Haven't had a chance to use it or the polish on a melodeon yet.

Just google "Micro-Mesh"

Nigel
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Polishing Info
« Reply #1 on: December 22, 2012, 07:02:58 PM »

Nigel, i have some but have never really messed with it.  What is your process for using it on wood finishes?

strad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 418
Re: Polishing Info
« Reply #2 on: December 22, 2012, 07:24:37 PM »

You start with the coarsest grit e.g. 2000 working (say) North/South and then the next finer one East?West and so on.
By the time you get to the finest grit the surface will be as smooth as glass without too much effort. I haven't tried the liquid Micro-Mesh yet.

Nigel
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Polishing Info
« Reply #3 on: December 23, 2012, 03:03:44 AM »

I assume you use a liquid with it? If so, what is a good one?

cajunfid

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: Polishing Info
« Reply #4 on: December 23, 2012, 06:59:50 AM »

Water with a minute amount of soap mixed in. A friend of mine used the kit available online to clean up the tops on a few of his guitars and it really did fix very small scratches and make the finish look like glass.
Logged

strad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 418
Re: Polishing Info
« Reply #5 on: December 23, 2012, 02:24:40 PM »

I didn't use any liquid on the fiddle plate, just a gentle amount of pressure.

Nigel

PS  Seem to remeember that I wiped the surface afterwards with white spirit to raise any little tufts
but never found any
« Last Edit: December 23, 2012, 07:59:27 PM by strad »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal