Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Keyboard overhaul  (Read 2947 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Keyboard overhaul
« on: December 25, 2012, 10:23:44 PM »

Merry Christmas y'all,

I'm very happy with my "new" 40-50 year old Corona IIIR but the buttons on the treble side are a bit stiff here and there.  What would you repair types charge for adjusting such a keyboard?  This is ADG, wooden keyboard, 3 rows, 31 buttons, 5 couplers.  I've written the Button Box but won't hear back till next year.

I'm curious how you know when the buttons are set "correctly," too - how do you measure that, purely by feel, or is there some kind of resist-o-meter that tells you when it's just right?  I've a Corona III AbEbBb with a newer plastic keyboard so I have something to compare to, btw, not to mention a few other button boxes and PAs.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Keyboard overhaul
« Reply #1 on: December 25, 2012, 10:28:51 PM »

I would not be able to estimate a price without seeing the instrument to establish the reason for the stiffness, for example it might be dirt or corrosion in the mechanism, or it might be some springs are too stiff.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Keyboard overhaul
« Reply #2 on: December 26, 2012, 02:22:43 AM »

Hey Theo,

I have opened the treble side up to have a look-see; no sign of creeping rust/verdigris; tried blowing out any stray chaff, little to be seen there, either.  The box is pretty pristine, too, basically no wear on the bellows at all and only a few minor dings on the case.  So I'm figuring it's just that the springs are stiff in of themselves - or the slots the keys pass through are maybe grabbing things?  But the action seems uniformly stiff.  If it were stiff springing what would it cost to modify/replace them? 

Does an action "break in" over time, too?  Probably not but thought I'd ask.  If it worked that way all old boxes would be looser than gooses.  Geese?   ;D  How about breaking them in manually all at once - pressing the rows down for a day or two with a board that's clamped to the keyboard, say?  That sounds along the lines of hanging the box from a door handle to let the bellows loosen up, which one box supplier was horrified I'd resorted to...best to actually ask about these things before diving in!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Keyboard overhaul
« Reply #3 on: December 26, 2012, 08:14:32 AM »

Mechanisms  don't really change much with use.  Steel springs don't change much over time either, apart from the very occasional one that might break.  What make and model is the instrument, and how old?

Sorry should have read your first post more carefully, it is a Corona!
« Last Edit: December 26, 2012, 08:47:47 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

nemethmik

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Keyboard overhaul
« Reply #4 on: December 26, 2012, 08:43:25 AM »

or the slots the keys pass through are maybe grabbing things?
Have you seen this
http://forum.melodeon.net/index.php/topic,10600.msg134205.html#msg134205
?
I am nearly sure the wood has been swollen over time and are grabbing the levers.
I have 3 Corona 3Rs and all have similar stiffness with some differing degree.
Logged
Miklos

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Keyboard overhaul
« Reply #5 on: December 26, 2012, 08:17:24 PM »

Hi nemethmik,

Yep, I caught that comment - tried to find out where it came from, too, but no luck - private email excerpt?  It's noteworthy that he says Dinos have the same problem, what with their being more upscale boxes, in theory anyway.  Did you apply the same fix to your own IIIRs?

I'd take the thing apart but am a bit wary of never being able to put it back together again!  And figured if this was a cheap enough operation I'd just pay to have it done.  I did take the treble side apart a bit, as I mentioned - got as far as detatching the keyboard, but the couplers are in the way, and I couldn't figure out whether I should just pull the coupler rods out - I didn't want to mess up the cylinders they pass through - I'm guessing those have cork inserts on the inside to prevent air leakage? 
Logged

nemethmik

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Keyboard overhaul
« Reply #6 on: December 27, 2012, 09:44:43 AM »

Did you apply the same fix to your own IIIRs?
No. The stiffness are not so hard at all that they were not playable nicely. The 3Rs are definitely stiffer than the Coronas made with the cheap simple (no-wood-comb) keyboard machinery, though.
The sound of a 3R is so powerful, because of the high quality reeds, that it would worth fixing this stiffnes, if you cannot live with it.
Keep in mind though, that if you pay for this job, you might not be able to get more money for the box, if and when you decide to sell it eventually. First, make sure that you definitely love the 3R sound. If and when you are sure that the sound of the 3R is what you had been seeking for years, then yes, go ahead.
Logged
Miklos

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Keyboard overhaul
« Reply #7 on: January 02, 2013, 02:33:36 PM »

I decided to do the fix-up myself, although the Button Box said it would be a simple enough job, $150 or thereabouts.  Didn't want to go to the hassle, and miss out out on a couple weeks of practice, so put in a couple evenings' work.  Never again!   ;)  What a chore, pushing that rod through and getting the keyhole aligned correctly.  Bit hard on the hands too - you guys must use a jig of some manner, right?  I tried Theo's method of feeding a wire through as each key was removed but in the end just removed them all, labeling each pallet "A1" etc for reference, and taping the spring to the key - I assume they've all been adjusted to match each key?  Ack, again, feeding that rod back through - I thought I was going to snap it off towards the end - indeed when pushing it through at the very end it bent abruptly!   :o  I'm familiar with old fashioned woodwind keys, which are also held in place by thin rods passing through wooden blocks - that's a big enough headache, with one rod per key.  The actual sanding of the slots was nothing in comparision.

Thinking about it - maybe feeding a smaller diameter rod from the other end, to get the key basically lined up correctly would help. 

The result in the end is fantastic, though.  Plays like a dream now.  I'd get out the jewler's pliers and 600 grit and perform some surgery, nemethmik.  Stiff keys are far from a desirable feature - if anything if I sell this box I'm going to advertise that the action was modified to return it to its original condition, i.e., better/correct.  I can see why Hohner switched to plastic, too - although the German fellow with the Corona website states that it affected the sound negatively.

Ultimately I'll be playing the Rik Castagnari are building for me, which has the notes in the fiddle's scale Coronas lack (lowest G/C, Bb in the 2nd octave), also a logical bass layout - what I wouldn't give for a pull G...but I'm very contented playing the IIIR now.  Before I was coming close to hurting my fingers trying to push those buttons.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Keyboard overhaul
« Reply #8 on: January 02, 2013, 02:49:34 PM »

  Ack, again, feeding that rod back through - I thought I was going to snap it off towards the end - indeed when pushing it through at the very end it bent abruptly! 

I'm guessing that on this model you can't unhook the springs to release tension like you can on a 2915, which makes the job much easier.  My tool for helping to feed the rod back in where the springs have to be in place is to use a chuck off a small drill with the rod threaded through.  This gives a good grip on the rod, a solid limp you can take hold of, and if you position it a short distance from the edge of the keyboard, and keep moving it along the rod there is a much reduces risk of kinking the rod.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Keyboard overhaul
« Reply #9 on: January 03, 2013, 12:51:24 PM »

Actually the springs are removable.  Didn't think to try and attach them ipso facto... ::)  Figured it couldn't be done for some reason.  Ya have to be smarter than the piano wire!   :P Will return to this thread if I ever go down this route again, thanks Theo. 
Logged

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Keyboard overhaul
« Reply #10 on: January 03, 2013, 03:07:27 PM »

  Ack, again, feeding that rod back through - I thought I was going to snap it off towards the end - indeed when pushing it through at the very end it bent abruptly! 

 This gives a good grip on the rod, a solid limp you can take hold of, and if you position it a short distance from the edge of the keyboard, and keep moving it along the rod there is a much reduces risk of kinking the rod.

Is the limp still solid?   ;)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

nemethmik

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Keyboard overhaul
« Reply #11 on: January 03, 2013, 03:08:15 PM »

I decided to do the fix-up myself
The result in the end is fantastic, though.  Plays like a dream now.  I'd get out the jewler's pliers and 600 grit and perform some surgery, nemethmik.
What an experience, and thank you very much for sharing!

I can see why Hohner switched to plastic, too - although the German fellow with the Corona website states that it affected the sound negatively.
Actually, what Hohner did was that they completely omitted the cumbersome wood-comb from the cheaper Corona models.
BTW, what Corona website are you talking about?
Thank You!

Logged
Miklos

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Keyboard overhaul
« Reply #12 on: January 03, 2013, 11:26:37 PM »

BTW, what Corona website are you talking about?

This one, author's name is Peter Unbehauen.  Very handy.

Do all Coronas use the simpler  key system now - no combs?  You could as well use wood for the body of the keyboard.  Would be interesting to do a bit of swapping to see if his notion that plastic has a negative effect on the sound has any basis in fact.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Keyboard overhaul
« Reply #13 on: January 04, 2013, 07:49:48 AM »

The IIIR is a relation of the helmet shaped Club-III series boxes rather than to "True" Coronas (true coronas as in enlarged ericas made down to a price all of which have a no-comb action) so is better made alround than the normal coronas - the reeds aren`t any better, they`re the same (any sound differences good or bad are down to the design of the whole box) but the casework, bellows and hardware of this series is generally a step above the Ericas, regular Coronas, pokerworks etc and the far more thoughtful pallet layout (2 rows of them for three rows) has come down from the Morino Club and Shand ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal