Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: reed blocks  (Read 3729 times)

0 Members and 1 Guest are viewing this topic.

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
reed blocks
« on: December 04, 2008, 03:59:03 PM »

does it make any difference what timber i use to make replacement reed block for tommy i have beech cherry mahogany  or teak also can i router out main body of reed block from one piece to save gluing all separate pieces
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reed blocks
« Reply #1 on: December 04, 2008, 04:41:09 PM »

If you want the sound to be as close as possible to the others I think you should try to get as close as you reasonably can to the timber and construction method of the other blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: reed blocks
« Reply #2 on: December 04, 2008, 05:51:40 PM »

I have another question related to reed blocks.  I am refurbishing an old Hohner Erika two voice club.  I am amazed at the detailed woodworking that went into the reed blocks.  Multiple bits of wood, mortis joints, hard wood for the base, softwood for the chambers, some chambers filled in with wood or clay to reduce chamber volume, all neatly glued together with hide glue.  It's an amazing piece of work!  That said, I would like to know if there are any italian reeds that will fit these blocks with a minimum of modification.  It would be great to be able to slap new reeds on these wonderful blocks.
Logged

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
Re: reed blocks
« Reply #3 on: December 04, 2008, 06:08:21 PM »

i may use mahogany for inside and beech or teak for outside. are,.dimentions of medium reeds from all italian companys the same dimension or should i wait until i have the reeds in front of me
« Last Edit: December 04, 2008, 06:37:46 PM by blackdot1234 »
Logged

hibbs3

  • Guest
Re: reed blocks
« Reply #4 on: December 04, 2008, 11:12:02 PM »

I too am heading down the road of building a reedblock, for a 30s baldoni I just bought (its an 8v, but someone took out one set of reeds to make it 6v)...how can I tell what kind of wood was used on the other blocks?
Logged

finnhorse

  • Guest
Re: reed blocks
« Reply #5 on: December 05, 2008, 12:00:30 AM »

I thought reedblocks were constructed with multiple pieces of wood to prevent them from changing shape as one piece of wood, behaving funny, and being stronger etc.  ???  A little bit like why a luthier makes a guitar or violin by joining two pieces for the back.  Does anyone have any long-term experience with the performance of homebrew reedblocks?

If you're going to use one single block, I'd think the grain should run perpendicular to the length of the block to keep it from twisting.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reed blocks
« Reply #6 on: December 05, 2008, 12:17:41 AM »

The highly prized Paolo Soprani red and grey two row Irish boxes have the main part of the reedblocks machined from a single piece of timber with a separate cap glued along the top, and a separate sole glued on the bottom.  After half a century twisting does not seem to be a problem with them, and they have the grain running lengthways.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

finnhorse

  • Guest
Re: reed blocks
« Reply #7 on: December 05, 2008, 01:12:05 AM »

I stand informed!   :)
Logged

nousuvesi

  • Member
  • *
  • Offline Offline
  • Posts: 20
Re: reed blocks
« Reply #8 on: December 05, 2008, 02:25:54 AM »

I would avoid teak for the reed blocks due to the oils in the wood. These oils could cause a problem gunking up the reeds and you may have a hard time waxing the reeds in place, also, teak is not so great with glue. Additionally, teak would add unnecessary weight to the box. 

I think mahogany or cherry would be fine. I have looked into my boxes and the blocks all appear to be softwoods such as pine, spruce, or fir.

Warping, twisting, etc, should not be a problem if the wood is properly seasoned, if you are really concerned you could put some sealer varnish on the wood. I think laminating the wood with its grain running in opposing directions would be a waste of time as the reed blocks are under no real stress. If you choose laminating because of concerns with warping you would have to glue many thin layers together and would still have to use a sealer for the wood. Laminating has its own problems as well, mainly delamination or glue failure.

My advice is to fine a nice piece of wood that is properly seasoned with straight grain. Mahogany is a good choice as it is very stable.

cheers,
nathan

Sorry, I have to come back to this (I got a thing for wood). If you choose a softwood make sure it will not weep sap! This rules out fir and most pine you would come across in your local lumberyard. In "How to Build an Accordion" author Alfred Fischer recomends building reed blocks out of whitewood (a fancy way of saying spruce).
« Last Edit: December 05, 2008, 02:55:27 AM by nousuvesi »
Logged
Nathan S.

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
Re: reed blocks
« Reply #9 on: December 05, 2008, 09:29:09 AM »

all info taken on board thanks the only thing with grain running lenghways is the space between reeds is very small therefor timber between would be about 2 mm wide is it going to stay attached
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal