Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Key solution, anyone?  (Read 5379 times)

0 Members and 1 Guest are viewing this topic.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Key solution, anyone?
« Reply #20 on: January 07, 2013, 01:37:08 AM »

A strip of piano tuners felt is the easiest, cheapest and did I say cheapest, place to start.  It is pretty hard to mess it up if you go slowly, in removing the fingerboard.

You may need 2 slightly different thicknesses of felt (one for the G and one for the C) but one single piece or 2 of the same thicknesses placed side by side if not wide enough will make a HUGE difference.

And did I say cheap?
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Key solution, anyone?
« Reply #21 on: January 07, 2013, 02:19:29 AM »

This is true of all instruments, regardless of make or construction, even those with foam under the fingerboard. Are you seriously suggesting that the Castaganari keyboard will enable me to become an articulate musician without the need for practice or technique?
But this isn't the point.  The OP was interested in limiting the button travel because he doesn't like the feel.  It's a very common modification, he should be free to implement it without being crucified by the pedants on this forum.

I think you ought to stick around a little longer before being so rude. Then we may have a chance to get to know you first and be inclined to let you get away with things ... maybe.

No-one is being "crucified" and no-one should be interested in point scoring here, it's pointless   ::)

There are thoughts being expressed, some discussion as will always happens gets a bit silly, but, really, crucifixions and pedantry?

jebe

  • Guest
Re: Key solution, anyone?
« Reply #22 on: January 07, 2013, 02:51:21 AM »

I think you ought to stick around a little longer before being so rude. Then we may have a chance to get to know you first and be inclined to let you get away with things ... maybe.
Actually, I have had 2 other accounts here over the years and have left both times in disgust at the good old boy attitude of the old-timers and pretend old-timers here.  Not to mention the pedantry and the bullying, especially of new members.  The third time's the charm, you won't have to worry about me coming back.  I have no need of your collective "wisdom" or snotty attitudes.  And I certainly won't beg for your permission to speak my mind.  Moron.

Marc G. Lamb,
Chesapeake, Virginia, USA, formerly White River Junction, Vermont
Former Foggy Bottom Morris Men, Albemarle Morris Men
Logged

David80

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Key solution, anyone?
« Reply #23 on: January 07, 2013, 05:35:22 AM »

I see. I totaly get the idea of what this is. And due to all of these answers, I would probably think twice before asking souch a question. And still, given the fact that f.ex hohners do not have any inlay on the treble side tells me that i can do without. - Just use a better technic. And if I don't want to practice any extra to get there, i can still modefy my hohner, and THAT would be just as normal.
So when i play, i often like to play on the inner G row. The only way to hit those keys correctly is by using more tip. If i change the angle of the attack, i seem to touch the outer key as well. Suppose my technic are not yet too good. Add this to the main dissapearing issue, and you get the feeling that this is much harder to learn than it really needs to be:) And especialy when you soon find out that the tone is fully rich as soon as the button opens the reed.
So, to save me for any trouble and to keep up the spirit I will modify my box:)
Logged

David80

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Key solution, anyone?
« Reply #24 on: January 07, 2013, 06:43:00 AM »

And, as for any opinion, consevative or not, theese debates are important! It is how we discover how others solve their problems:) So lets be gentlemen and keep shearing our opinions in a good manner:)

David
Logged

Mike Hirst

  • Hero Member
  • *****
  • Online Online
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Key solution, anyone?
« Reply #25 on: January 07, 2013, 10:21:17 AM »

It would appear that I have rattled some cages. Certainly not my intention.

My first instrument was a Hohner one row four stop which was bought new in 1977. I have continued to play Hohner instruments to this day. Whilst I have at times been aware of the fact that some Hohner instruments allow the buttons to be pushed lower than the top level of the fingerboard, I can honestly say that it has never been an issue.

I have no doubt that foam/felt inserts can be used to limit button travel. Even with this modification we, as musicians, have a choice of how far the button is pressed. This decision is a crucial factor in the way that we articulate our musicality, regardless of whether that depression takes the button below the fingerboard, or not.

It is significant that the majority of posts in this thread which advocate mechanical limitation are from forum members who are already well versed in the dark arts of melodeon modification. We are not all such able craftsmen. Keyboard modification is an intrusive and, in inexperienced hands, potentially damaging process. I know from personal experience that cludging and melodeons do not mix.

For my own part I have preferred to limit button travel through adopting a less forceful finger action. In my experience this has resulted in a more considered and articulate approach to playing.
Logged
Semper idem, sed non eodem modo

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Key solution, anyone?
« Reply #26 on: January 07, 2013, 10:31:38 AM »

I must admit that I quite liked the fingers disappearing  down the holes on my Erica. I sort of knew where I was on the keyboard. Crazy I know, but true. With the Dino I now have I find that my fingers are inclined to slip off. Not good for Bob Cann stuff!!!
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Key solution, anyone?
« Reply #27 on: January 07, 2013, 06:27:06 PM »

It would appear that I have rattled some cages. Certainly not my intention.

My first instrument was a Hohner one row four stop which was bought new in 1977. I have continued to play Hohner instruments to this day. Whilst I have at times been aware of the fact that some Hohner instruments allow the buttons to be pushed lower than the top level of the fingerboard, I can honestly say that it has never been an issue.

I have no doubt that foam/felt inserts can be used to limit button travel. Even with this modification we, as musicians, have a choice of how far the button is pressed. This decision is a crucial factor in the way that we articulate our musicality, regardless of whether that depression takes the button below the fingerboard, or not.

It is significant that the majority of posts in this thread which advocate mechanical limitation are from forum members who are already well versed in the dark arts of melodeon modification. We are not all such able craftsmen. Keyboard modification is an intrusive and, in inexperienced hands, potentially damaging process. I know from personal experience that cludging and melodeons do not mix.

For my own part I have preferred to limit button travel through adopting a less forceful finger action. In my experience this has resulted in a more considered and articulate approach to playing.

My personal experience, broadly, has been the same as yours, with the addition that for some reason I just don't like the feel of Hohners with a limited button travel. In my mind it also would seem to limit the possibilities round pushing buttons in further to make a different/louder sound. That might just be in my head though.

I would never damn anyone for making the change. There are too many variables around hand/finger size, playing style and personal preference to make any definitive statement either way.

However, I do feel free to comment about my experience and the issue of pushing too hard on the buttons and general tension that makes playing more difficult, most often seen in beginners. Limiting button travel is not really a solution for that.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Key solution, anyone?
« Reply #28 on: January 07, 2013, 09:10:08 PM »

I'm a very late starter on the melodeon, and have probably asked more 'daft' questions than most, I've always been treated with courtesy and my queries taken seriously. I'm not sure where you would have to go to find the sense of friendly humourus debate that we have here on Melnet; I found the accusation of 'pedantry and bullying' completely unfounded and offensive.However, back to fingers vanishing into the keyboard. This happens on one of my 1040's, and thats fine, the other two do'nt behave like that. I get the feeling that my fingering is lighter when the buttons go in further and I play a little quicker. Counter intuitive?.. :o  ::)
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Key solution, anyone?
« Reply #29 on: January 07, 2013, 10:00:54 PM »

  For my own part I have preferred to limit button travel through adopting a less forceful finger action. In my experience this has resulted in a more considered and articulate approach to playing.

I think Mike has a very fair point.  I have never limited the travel of button on my hohners as I don't shove the thing down the hole so it would be a fairly pointless exercise.  Perhaps its because i only had  a hohner for many years that I developed a light touch on the buttons  so as not to get the fingers stuck in the holes!   Switching from  a hohner to a box with limited button travel doesn't present any problem as  I presumably depress them by a similer amount

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

David80

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Key solution, anyone?
« Reply #30 on: January 08, 2013, 05:38:43 PM »

Again, thank you all for sheared answers. I've made up my mind. :)
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal