Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 5 6 [7] 8 9 10 11 12 ... 27   Go Down

Author Topic: Chanson  (Read 109831 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Chanson
« Reply #120 on: January 20, 2013, 11:35:56 PM »

It should be possible to re-glue the ends. You might lose a fold, depending on how easily it came off.

I am considering removing the red and blue paper to get back to the basic material. You can get bellows tape, but I think it's too thick for anything this small. I was going to get some thin leather strip from Concertina Spares maybe 3/4" wide and re-bind all the way where the paper is at present.
Don't think that would be expensive. Prob leave existing "canvas" corners, for mechanical strength, the leather will seal it it. B&Q do some "Leather Glue" that I'm sure will be fine.

For mine I intend to cut out some "diamonds" to fit over the existing gussets. (They will be rounded diamonds!) This would be done first. Ideally one would replace them, but life is too short.
With the thin tape, this should work, with the bellows held extended. Then re-tape the outer edges. I have the leather, just planning to re-tape the corners at present. Waiting for weather and head cold to clear.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Chanson
« Reply #121 on: January 21, 2013, 12:19:15 AM »

    It didn't come off easily. I needed the strength of 43 men coupled with a sturdy stanley/screwdriver combo to remove them. I seriously thought at one point they were not removable, but then I calmed myself and eventually got them free. My one is an older model keep in mind, and has not been subjected to the ol' 'keep away from heat' etc that my other boxes abide by, so it's possible the glue kept melting further and further, bonding more and more. Still, I had never thought of just stripping them back, lobbing off a fold and retaping.
    I'm off to uni for 4/5 months come Friday, so will postpone modifications for a while whilst I pack/console mum, but will post relevant bits and bobs to my uni abode and continue the 'fettling'.
    Expect a fully working melodeon by Whitby sort of time  8)
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Chanson
« Reply #122 on: January 24, 2013, 07:38:45 PM »

Hi Brian, Theo, Ted and all,

I've just had Brian's Chanson in for work on the bass end. Initially it was fitted with Hohner reeds (aluminium H-type) in C with 2nd button start. This required fitting another reedblock as the original plastic one was too small, I found. A cut-down treble reedblock taken from an old 'breaker Erika' was fitted.

The result was better than either I or Brian anticipated, so now it has come back for Hohner reeds to be fitted to the bass end also.

Brian has done a lot of modifications himself - double-bellows, well-positioned brackets and a lot of skilfull 'anti-leak-work'.The end-product is a punchy little instrument with genuine tonal quality . The downside? ...."I want one", says my wife Elli .... but I suppose that's a bit cheaper than "I want one" pointing at another Preciosa!

Brian has asked me to take a photo and make a recording ... the recording is on this soundcloud link ...

https://soundcloud.com/microbot-2/chansonbrianc2-1

Here is the only photo I got before my camera ran out of charge....

cheers

Mike R
« Last Edit: January 24, 2013, 10:04:48 PM by Microbot »
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Chanson
« Reply #123 on: January 24, 2013, 07:48:52 PM »

Mike, many thanks for the info. We're the reeds original as fitted to the Chanson.? By that I mean are all the little Beano Pathetties fitted with them?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Chanson
« Reply #124 on: January 24, 2013, 07:54:33 PM »

Nice one, Mike.

Nick, no way is them original reeds! Originals are brass, for starters.


Brian - intrigued by the wooden base to the fingerboard - of necessity, or an improvement? Thinking of doing something there myself for better thumb support.

Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Chanson
« Reply #125 on: January 24, 2013, 09:31:56 PM »

 8)The plastic board under the bass strap was replaced with polished wood from a sturdy cigar box . This was in order to fit a brass thumb piece; I've got a crippled left paw  and the brass piece stops it sliding through the strap up to my armpit and gives me some control over the bass buttons.I had wood left over and replaced the bottom of the fingerboard. The thumb piece is one of those curved fittings that you find on big sash windows at the bottom to raise them. I hope that makes sense Malcolm. Does make a nice noise though does'nt it? Nick, the Chanson reids have been replaced with Hohners. 8) :||:
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Chanson
« Reply #126 on: January 24, 2013, 09:46:43 PM »

Cheers Brian - interesting!
« Last Edit: January 25, 2013, 11:40:43 PM by malcolmbebb »
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Chanson
« Reply #127 on: January 25, 2013, 11:39:34 PM »

Congrats, looks and sounds 'the business'  8)
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Chanson
« Reply #128 on: January 26, 2013, 07:53:12 PM »

8)The plastic board under the bass strap was replaced with polished wood from a sturdy cigar box . This was in order to fit a brass thumb piece; I've got a crippled left paw  and the brass piece stops it sliding through the strap up to my armpit and gives me some control over the bass buttons.I had wood left over and replaced the bottom of the fingerboard. The thumb piece is one of those curved fittings that you find on big sash windows at the bottom to raise them. I hope that makes sense Malcolm. Does make a nice noise though does'nt it? Nick, the Chanson reids have been replaced with Hohners. 8) :||:

My two reed blocks have been sent off to Martyn White to be replaced with C reeds of the Hohner  family. Trouble is I'll probably get them back before I  make the new bellows  and they'll just sit there while I think about the next move. Exciting though. A million pieces on the bench .Arrrrgh.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Chanson
« Reply #129 on: January 26, 2013, 10:22:28 PM »

Nick, wish I had the balls to build a set of bellows; perhaps when you've done yours I'll give it a go ...I think the Tedrow video scared the life out of me... :-\
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Chanson
« Reply #130 on: January 27, 2013, 02:11:35 PM »

Nick, wish I had the balls to build a set of bellows; perhaps when you've done yours I'll give it a go ...I think the Tedrow video scared the life out of me... :-\

Brian, don't be scared. Bob Tedrow was making world top quality Concertina bellows. Our little Chansons are much simpler being square and not thrupenny bit shape. Sorry Quentin.
His basic principle is to make the whole length in one and then make the cuts, in our case the four sides. Now I do have a band saw, but I see no reason why this couldn't be done with a hand fretsaw which I intend to use.
Incidentally , I have found a source of the self gummed cambric tape he mentions.
It's called  "gummed linen" in UK and is available from Conservation Resources. You'll find them on the web.( still don't know how to do links) one problem I've encountered is that the Chanson has only one wooden end. The other is just glued to the bass section. To make a proper bellows we would need wood or plastic on both ends. I'm thinking that those Hohner clips for the bass end might work. Undo the clips, off comes the bass box.
Malcolm Bebb is a great source of information  and I'm sure he can add to this.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Chanson
« Reply #131 on: January 27, 2013, 04:33:36 PM »

Malcolm Bebb is a great source of information  and I'm sure he can add to this.
:|bl Bloody 'ell Nick, if you'd wanted me to buy you a pint at the next Swanage FF you only had to ask!

...opinions, maybe...

The methods used to make "proper" concertina bellows, and to make melodeon/accordion/cheap concertina bellows, are different. Concertina bellows are traditionally made from individual pieces of card, cut and hinged with linen/cotton and leather. This is what Bob shows, one method. He doesn't quite separate the card, but it's the same principle.
T'others use folded card, what people might call "concertina" folded.

Two reasons, one is cost/ease of manufacture but also because on anything with reed blocks the blocks are liable to extend into the bellows space (as they do on mini-melodeons by up to about 25mm, or an inch on the older ones).

The bellows needs to clear the reed blocks, plus the valves, plus leave a bit of air space. So the  accordion family tends to have more, shallower folds while traditionally build concertinas (inc better hybrids) have fewer, deeper folds because the reeds pans are flat so the bellows has its space to itself. Last time I counted, my mini melodeon had about 14 folds.

To make accordion bellows by concertina methods would be a pain. Do-able, but fiddly. They'd be lovely to play with very little playing in, but you'd need to be keen. And a mini-melodeon is smaller still.

Charlie and others sell the folded card for grown-up boxes, but it wouldn't suit minis. Have a look inside the bellows, you'll see quite easily. Also it will be thinner card. I don't know where to get this size of folded card, even allowing for using cheap stuff not conservation grade card.
Obviously somebody makes it, but whether for cheapo concertinas or melodeons, it's likely to be somewhere around China... You can fold your own, you can do it with some blocks of wood and clamps or a Workmate, but is sounds easier than it is. Although might be easier with thin card, not tried. PS it's bloody boring.

Card from cereal boxes has been suggested, pre-folded! but that depends how much All-Bran you eat. And you'd still have the other fold to hinge. Bias binding from a haberdashery might work for that.
(I have stashed some card from Foster's Lager outers to try it out some day. I thought using that might have a little more street cred than making bellows out of Rice Krispies boxes. But, since it's mass produced lager, I have reservations on the latter point.) (No, it wasn't for me)

For tools, what I call a guillotine and what Nick calls a bench knife (IIRC) would be handy for individual card cutting.
I tried cutting the corners of a folded bellows by hand, using a modified mitre guide (and a saw. Before some other b*gger says it.) it was even less successful than I thought it would be. A geriatric mouse with his false teeth out would have got a cleaner edge. I'm sure 90% of that is me, but for my next attempt it will be the bandsaw. No question.

Finally, bellows frame. You are lucky to have wood, mine is plastic. You'd just have to do what they've done, glue directly to the bass end. Again, unless you've the means and enthusiasm to design and make something better. A jig, or some careful marking out, might be good.

Nick is probably one of the best equipped, both in skills and tools/materials, to attempt a bellows re-make. People have done similar. Probably put Brian right off now but remember -the materials are not expensive, the tools needn't be, it is largely confidence and practice. (Both of which I'm working on!)
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Chanson
« Reply #132 on: January 27, 2013, 05:23:59 PM »

Malcolm, What with You and Tedrow I'm going to have nightmares for a week...I think ,{ as the only man in the world who can make Chanson bellows ALMOST airtight} I will go back to what I know best, buy another Chanson, just for the bellows, Evostick the bellows together, and apply plentiful coats of PVA to the gussets. I know that Microbot will back me when I say {ad nauseum} it really does work. Perhaps I have a special magic.....? Unlikely..Mark 2 almost ready to be sent off to Microbot to be converted to D.. What larks Pip... Oh, any ideas on what to do with the evicerated corpses of bellows harvested Chansons..? ??? :||:
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Chanson
« Reply #133 on: January 27, 2013, 08:13:30 PM »

Malcolm..I've sent PM
Logged

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Chanson
« Reply #134 on: January 28, 2013, 01:54:16 PM »

Im going to make my own bellows. I made my chanson a single voice, so am 'toying'  :P with the idea of making a flat mounted reed block to a) make it lighter (not that it needs to get lighter)
b) to remove any chance of my homemade bellows not being big enough.
Am waiting on my stuff to be posted over, will keep you posted too
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Chanson
« Reply #135 on: January 28, 2013, 04:08:25 PM »

I had a thought today at work (don't start!)
Making bellows really is not that difficult. It's a psychological thing, they LOOK so complicated.
But once you realise that it's only a fold with a gusset repeated many times it seems much simpler .
I mean, that's all a computer is: on, off on off on off on repeated many times in Binary. And in my case the computer is often off/on
However, the point I make is valid. A fold and a gusset many times. I must admit that I prefer the single strip method over the folded cardboard idea which I think is smore difficult to achieve.
I still sing the praises of Bob Tedrow. It's probably  worth having a look at camera bellows websites, the principle is the same, although tapered. I'll let you know how I get on and keep us posted Ted and Malcolm and all of you who are intrepid enough to have a go.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Chanson
« Reply #136 on: January 29, 2013, 01:45:59 PM »

Just had a slap-yourself-on-the-head duh! moment when the blindingly "we-did-this-in-primary-school" obvious is once again revealed.  :|bl

The reason why my last attempt at card folding was so dismal is that I totally neglected to score the card. I came across a gizmo called a "Scor Pal" which describes how to make "accordion folds" in your card stock (basically a grooved surface with some guides).

Another source suggested using a flat "bone" tool with a straight edge (and a jig). Either way, with a decent score, getting a neat straight consistent fold for bellows making would be much easier.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Chanson
« Reply #137 on: January 29, 2013, 02:45:46 PM »

Do you know, I'm beginning to think that we humble Chansonistas are laying the foundations for a PHD course...you interested Ted? ;D :||:
Logged

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Chanson
« Reply #138 on: January 30, 2013, 08:39:57 AM »

Course I am! You know though, there's a weekend workshop in here somewhere too...
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Chanson
« Reply #139 on: January 30, 2013, 02:41:07 PM »

Course I am! You know though, there's a weekend workshop in here somewhere too...

Count me in!
 Especially if anyone wants to visit Swanage.
Am at work this week and have been playing around with bits of card and paper. Lo and behold, the Tedrow method really works and almost seems too easy. I'm sure there's a pitfall coming soon though.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: 1 2 3 4 5 6 [7] 8 9 10 11 12 ... 27   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal