Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: H Reeds  (Read 4727 times)

0 Members and 1 Guest are viewing this topic.

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
H Reeds
« on: December 06, 2008, 06:29:17 PM »

Hi,

Just got a little made-in-Québec 2-voice 1-row, it had a few things to fix and saw that the reed plates all have a H on them.

Are these Hohner?


 
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: H Reeds
« Reply #1 on: December 06, 2008, 06:47:55 PM »

Older Hohner reeds have an H on each reedplate.   The later ones have T.  I think the changeover was sometime around the 1940s but I'm not exactly sure.  The older reeds have a smaller square part where the rivet goes, and the tongue profile is a bit different.   The sound is different too, softer and less strident that the T reeds.   I assume that the H stands for Hohner and the change to T signified a change in manufacturing process. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: H Reeds
« Reply #2 on: December 06, 2008, 08:32:48 PM »

Just got a little made-in-Québec 2-voice 1-row,

Are you able to post a picture? I'd love to see it.
-Andy

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: H Reeds
« Reply #3 on: December 06, 2008, 08:42:38 PM »

When I went to see Stan Mayhew last, one of the things he said was that the letter stamped on Hohner reeds denoted the size of the rivet. He also said that he and his colleagues complained for years about the dome headed pins that were fitted at that time, as it made the reeds difficult to tune. I'm only repeating what he said, I wouldn't have a clue.
Logged
Bill of Old Radipole Village

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: H Reeds
« Reply #4 on: December 06, 2008, 09:18:52 PM »

Are you able to post a picture? I'd love to see it.
Like this. I looked inside, it says "14 février 1990 Montmagny" and another place says "Labonté" written with a pencil. It's not a high-end instrument, it seems like the craftsperson cut a few corners when assembling it, there is lots of wax around the reed plates where we would expect less, etc. Probably a "workshop" box put together by an apprentice.

But it looks good, plays well and it did not cost much money! It's a 2-voice, the knobs on the top of the treble side are not functional. It's in the key of C, and the top button plays Bb/Ab.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: H Reeds
« Reply #5 on: December 06, 2008, 11:57:33 PM »

Older Hohner reeds have an H on each reedplate.   The later ones have T.  I think the changeover was sometime around the 1940s but I'm not exactly sure.  The older reeds have a smaller square part where the rivet goes, and the tongue profile is a bit different.   The sound is different too, softer and less strident that the T reeds.   I assume that the H stands for Hohner and the change to T signified a change in manufacturing process. 
Do I have a roughly datable box then? All of the treble reeds are stamped 'H' and all of the bass and chord reeds have a 'T' stamp. Can it be that the older bass/chord reed sets were exhausted some time before the treble reed sets?

I do realise that this is very possibly an imponderable but it would be nice to know ...
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

finnhorse

  • Guest
Re: H Reeds
« Reply #6 on: December 07, 2008, 01:43:43 AM »

Older Hohner reeds have an H on each reedplate.   The later ones have T.  I think the changeover was sometime around the 1940s but I'm not exactly sure.  The older reeds have a smaller square part where the rivet goes, and the tongue profile is a bit different.   The sound is different too, softer and less strident that the T reeds.   I assume that the H stands for Hohner and the change to T signified a change in manufacturing process. 
Do I have a roughly datable box then? All of the treble reeds are stamped 'H' and all of the bass and chord reeds have a 'T' stamp. Can it be that the older bass/chord reed sets were exhausted some time before the treble reed sets?

I do realise that this is very possibly an imponderable but it would be nice to know ...

Finding mixed sets in one box seems pretty common.  Sometime around the 1940s, either prewar or postwar, the factory switched from H to T reeds.  They were probably producing T reeds while using up remaining stocks of H reeds, because it wouldn't make sense to waste them.  It's also possible that a player somewhere in the box's history preferred the bite of more aggressive T reeds in the bass end, or the more sophisticated murmur of H reeds in the treble end and swapped them out, resulting in a mixed set.

It's far from a perfect science but I think the best (or better) way to date a box is through comparing a combination of characteristics, including reed type, cabinet style, grille style, foot style, bass panel sound hole design, keyboard style, logo stencil, sometimes color, the "steel reeds" plate, and if you're lucky a tag from the retailer or a special design characteristic limited to a small number of boxes and thus easily dated.  Some of the older models, i.e. pre-1930s can be dated more precisely by identifying features that were absorbed from other manufacturers' designs like Kalbe and Koch.  Hohner produced a dazzling array of boxes between 1915 and 1930, and would often just "Hohnerize" the existing designs from these companies.  Usually --a good example is the white, midsize very ornate Koch PA with the "lyre" shaped keyboard and the white Hohner counterparts, you see them all over Ebay -- Hohner kept the main idea of the model and cut the frills.  Lattice work, paint, trim, etc. all went out the window when Hohner got a hold of them.  It was quite a business strategy.  For those years, their product line appeared to be quite a lot more diversified than it actually was.   

Using information from old catalogs seems to help corroborate the dates.  But generally with the "native" Hohner diatonic models, it's just a matter of looking at the model and/or cabinet type and logo stencil, and you get a date estimated to within a 5-10 year period... at that point does it matter if you know it's from 1947 or 1948? 

Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: H Reeds
« Reply #7 on: December 07, 2008, 10:49:04 AM »

at that point does it matter if you know it's from 1947 or 1948?

Not at all, it's simply a matter of interest and 'very probably 1940s' is near enough for me. No doubt the ongoing instrument database will provide a wealth of detail before too long.

I'm lucky enough to have three Wheatstone English concertinas and it's kind of nice to be able to look them up in the ledgers and find the model number and the exact date they left the workshop; in some instances you can even find the name of the original purchaser. There is also the habit of repairers signing and dating the inside of the instrument when any work was carried out, all of which adds to the provenance.

Pete
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: H Reeds
« Reply #8 on: December 08, 2008, 04:55:05 PM »

The sound is different too, softer and less strident that the T reeds. 
When I compare the sound with my 2-stop Hohner it is indeed a bit less "punchy", although the box with the H reeds is not tuned as wet as the Hohner.   
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: H Reeds
« Reply #9 on: December 08, 2008, 04:57:41 PM »

Do I have a roughly datable box then? All of the treble reeds are stamped 'H' and all of the bass and chord reeds have a 'T' stamp.
My box was made in 1990 and has H reeds!!! Obviously, they took an old set of reeds to fit a new box. Not always a good reference, I guess.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: H Reeds
« Reply #10 on: December 09, 2008, 12:33:30 PM »

Like this. I looked inside, it says "14 février 1990 Montmagny" and another place says "Labonté" written with a pencil. It's not a high-end instrument, it seems like the craftsperson cut a few corners when assembling it, there is lots of wax around the reed plates where we would expect less, etc. Probably a "workshop" box put together by an apprentice.

Looks interesting.  Actually, I wouldn't guess that it is from an apprentice at all -- an apprentice would not be allowed to cut corners etc.  But I have seen many "one-off" boxes in Quebec made by inexperienced builders, often using parts from old Hohners.  Have fun playing it!
-Andy

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: H Reeds
« Reply #11 on: December 09, 2008, 05:56:29 PM »

  But I have seen many "one-off" boxes in Quebec made by inexperienced builders, often using parts from old Hohners.  Have fun playing it!
It does sound good, the parts all fit very straight and tight, as you can see from the picture, it's just that the waxing job looks sloppy, and there were two bass reed valves that fell off. Could have been that someone else re-waxed the reedplates at a later time.
« Last Edit: December 09, 2008, 05:59:04 PM by québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal