Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Low Bass Reeds?  (Read 3401 times)

0 Members and 1 Guest are viewing this topic.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Low Bass Reeds?
« on: January 06, 2013, 04:11:11 PM »

Was just re-reading the Gaspacho thread and seeing that DTN on his Mory can switch in/out low bass reeds after he kindly explained what was going on in his  recording. It now explains some of Andy Cutting's variations in sound on some of his recordings that I was never sure what was going on.

I'm now wondering how this works.
Does it mean a Mory has an extra low bass note in the chord ( I presume chord, or is it bass note? ), or is it that it can somehow split out the low reed included in the chord or bass and give the option of having it in or not?
..... it is an option that allows more colour to a thoughtful piece, and is in my opinion a very nice effect.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Low Bass Reeds?
« Reply #1 on: January 06, 2013, 04:26:53 PM »

Does it mean a Mory has an extra low bass note in the chord ( I presume chord, or is it bass note? ), or is it that it can somehow split out the low reed included in the chord or bass and give the option of having it in or not?
Standard Mory couplers let you switch out the lowest bass and the third out of the chord, and you can do this in any combination.   Any Italian box with two bass stops can do the same, its just quicker and easier to do with the push button couplers on a Mory.  The Mory does not have bass reeds that are any lower than other Italian made boxes.   The size of the box does enhance the bass sound though and makes the lowest tones more audible.

Mory treble couplers come in two main types.  Older boxes just have one lever behind the keyboard that switches the L reed in or out, Andy's DG is like this.  Later Morys have three levers that give the choice of L, LM, LMM, MM, M.

Andy also exploits the difference in tone between playing in the lower or upper end of the keyboard, and especially the LMM sound in the top half of the keyboard is something I hear a lot in his playing.  But mostly it is about playing skill.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Low Bass Reeds?
« Reply #2 on: January 06, 2013, 04:35:54 PM »

But mostly it is about playing skill.

Bugger!

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Low Bass Reeds?
« Reply #3 on: January 06, 2013, 05:32:32 PM »

Hi Theo,
OK.....so it only affects the chord, taking out the lowest bass and third in the chord....... that makes sense cos it gives that thin sound which can give wonderful variation in the sound when taken out then brought back in again.
I have started to listen more to the way he goes up the keyboard, as Steve Freereeder of this parish has pointed it out to me. Having tried History Man I can see what happens, having transcribed the dots I have up nearer the knee end. I can 'see' it, but it's one tune for the 'to do' pile later on.

"mostly it is about playing skill....."
Ahhhh that would be it then......
" Bugger! ...."
indeed  :D

Thanks
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Low Bass Reeds?
« Reply #4 on: January 06, 2013, 05:36:13 PM »

Hi Theo,
OK.....so it only affects the chord

No! The couplers take the third from the chord and/or the low reed from the bass.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Low Bass Reeds?
« Reply #5 on: January 06, 2013, 05:51:14 PM »

As Lester says, third from chord and low reed from bass, which does indeed give a very thin sound which gives a great contrast from the full bass.  For the thinnest sound you can leave all the bass reeds out by simply playing only on the chord buttons, and with thirds out.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Low Bass Reeds?
« Reply #6 on: January 06, 2013, 07:26:46 PM »

Oh! ok.....  thanks for clarifying that Lester.

I was thinking it was the same as my thirds stop on my Hascy, but I've just gone and twiddled, that only affects the chords not the chords + bass, hence my confusion......
Yes, a thirds out chord only accompaniament is really thin. I've taken to using it as a 'once through' for a favourit waltz, then come back in with basses next time round. Now I've got a stop like this I have to start to use it!
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Low Bass Reeds?
« Reply #7 on: January 06, 2013, 08:15:17 PM »

There are holes in the fondo
Where the air gets in
But they're ever so small
That's why the sound is thin.

(adapted from the Miligan).  (:)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Low Bass Reeds?
« Reply #8 on: January 06, 2013, 08:50:10 PM »

 ;D
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Low Bass Reeds?
« Reply #9 on: January 06, 2013, 11:34:57 PM »

You could hav a stop added to take the low bass out. Many Italian boxes are designed to make this a fairly straightforward mod.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Low Bass Reeds?
« Reply #10 on: January 07, 2013, 05:21:33 PM »

Hmmmm.... maybe. Never realised it was an available mod.
Mind you, the beauty of some of the things I've heard played is that the change in tone happens mid-tune to good effect. Not sure if I'd be adept enough to push/pull a stop quickly enough then continue the tune.
There's always the Chin Approach I suppose  ;)
I'll have a twiddle with changing thirds in/out whilst trying to keep playing and see if it's achievable for me.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Low Bass Reeds?
« Reply #11 on: January 07, 2013, 05:54:49 PM »

I've never understood the reason for pull/push stops, neither on the treble nor on the bass side. It's notoriously difficult if not impossible to make use of them while playing. They tend to either get stuck (mostly from being so easily bent) or get too loose and succumb to the laws of gravity. They are an obvious source for air leaks and since many of them are screwed onto the register slides, they may need constant re-adjustment. While they may look quaint on traditional cajun boxes they are (at least in my opinion) out of place when it comes to other diatonic instruments. More user friendly solutions are really no problem at all. Both low bass and third switch can easily be placed near the air button and operated while playing.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Low Bass Reeds?
« Reply #12 on: January 07, 2013, 06:17:15 PM »

I've never understood the reason for pull/push stops, neither on the treble nor on the bass side. It's notoriously difficult if not impossible to make use of them while playing. They tend to either get stuck (mostly from being so easily bent) or get too loose and succumb to the laws of gravity. They are an obvious source for air leaks and since many of them are screwed onto the register slides, they may need constant re-adjustment. While they may look quaint on traditional cajun boxes they are (at least in my opinion) out of place when it comes to other diatonic instruments. More user friendly solutions are really no problem at all. Both low bass and third switch can easily be placed near the air button and operated while playing.
Hmmm....
What you have described is not my experience at all. I've had/have instruments (Castagnaris, Hohners, Saltareles, various Cajun boxes) with push-pull stops for many years and I've rarely, if ever, encountered the problems you mention. I love the stops on my instruments and the variety of sounds they enable me to have.

The worst problem I ever had was a single loose stop on a Hohner 114 which tended to sink down under gravity. Easily remedied with a small friction pad made out of a scrap of bellows gasket glued strategically inside.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Low Bass Reeds?
« Reply #13 on: January 07, 2013, 06:56:39 PM »

I think you have been unusually fortunate Steve!  At festivals I see many Hohner 114s adorned with a great variety of clothe pegs, elastic bands,  bits of scarf and all kinds of devices to hold loose stops up.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Low Bass Reeds?
« Reply #14 on: January 07, 2013, 07:38:17 PM »

Hah, I think I know what you mean Theo  :D
To be fair, the stop on the treble side of my Tommy to bring in the low reed is firm and positive, nothing wibbly about it at all.
Similarly the stop to take out thirds on my Hascy is also firm and positive. Maybe it's because they don't get as much use as other treble stops on a one row?
I suspect the couplers behind the fingerboard or other devices on the bass end will make a box heavier, but it does give you the opportuniy to alter the sound on the fly without having to do some strange contortions to include your chin or maybe miss a beat......
Anyway, it's monday so it's  :M
catch you all later
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Low Bass Reeds?
« Reply #15 on: January 07, 2013, 11:26:51 PM »

To be fair, the stop on the treble side of my Tommy to bring in the low reed is firm and positive, nothing wibbly about it at all.
The slide that the stop works on a Tommy is sandwiched between the fondo and the reed block, if it becomes loose or becomes too tight it is just a matter of tightening/loosening the reed block camping screws. The problem I have come up against with Tommy stops is if you screw the stop in to much it prevents the slide fully closing so the bass reeds sound, and not in a nice way, all the time.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Low Bass Reeds?
« Reply #16 on: January 08, 2013, 07:33:37 AM »

I think you have been unusually fortunate Steve!  At festivals I see many Hohner 114s adorned with a great variety of clothe pegs, elastic bands,  bits of scarf and all kinds of devices to hold loose stops up.
Oh yes, I know! I don't usually play a Hohner 114 these days, but the variety of devices people use to hold up the stops is getting to be part of the tradition. The best I've seen is Katie Howson's day-glo pink, splayed toes-shaped, foam insert, originally designed to keep one's toes apart whilst applying nail varnish.  ;D
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Low Bass Reeds?
« Reply #17 on: January 08, 2013, 12:04:55 PM »

I've never understood the reason for pull/push stops, neither on the treble nor on the bass side.

Well, they're lifting handles, of course. ::)
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal