Now looking for a suitable durable lacquer or varnish to finish it with.
Rustin's Plastic Coating would be a good choice but do bear in mind that it needs to be mixed with a hardener first, which can be a bit of a pain compared to just using it straight out of the can. Spray-on acrylic lacquer from cans is quite a hassle to use, (respiratory protection, newspaper everywhere, etc), especially if you haven't done any spraying before and, IMO, looks cheap.
You could do a lot worse than an oil finish. They're not as durable, (although that's not that much of a problem, as all the oil-finished guitar necks and gunstocks that endure constant handling will attest), but are inexpensive, ridiculously easy to apply, look a lot better, feel so much nicer under the hand and can easily be refreshed.
I use either Behlen waterborne urethane, (
http://www.behlen.co.uk/Merchant2/merchant.mvc?Screen=PROD&Product_Code=B640-29406&Category_Code=MIWBF ), or Napier London Gunstock Oil, (
http://www.napieruk.com/acatalog/London_Gunstock_Kit.html ). Behlen also do a super tough tabletop varnish called Rockhard which is similar to Rustins Plastic Coating but doesn't need to be mixed first, although it's a lot more expensive and not as widely available.