Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Clip on microphone,would it work?  (Read 6607 times)

0 Members and 1 Guest are viewing this topic.

mac

  • Member
  • *
  • Offline Offline
  • Posts: 32
Clip on microphone,would it work?
« on: January 08, 2013, 09:45:56 PM »

http://www.amazon.co.uk/Microphone-Pickup-Guitars-violin-mandolin/dp/B001GA9ELO/ref=sr_1_9?s=musical-instruments&ie=UTF8&qid=1357680758&sr=1-9

Just wondering if this would pick up a melodeon sound enough for home recording? I see its meant for guitars and stringy things and the lead is a bit short.. but its only £4.99

But it says ..."virtually any instrument that vibrates"...
Does anyone reckon it would work?  ???

Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Clip on microphone,would it work?
« Reply #1 on: January 08, 2013, 09:54:29 PM »

No it will not work, well not very well anyway. The mic looks v similar to the pickups for my wife's electronic tuner for her dulcimer. Just tried iit out with a little battery amp and it was poor.

mac

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Clip on microphone,would it work?
« Reply #2 on: January 08, 2013, 09:57:01 PM »

No it will not work, well not very well anyway. The mic looks v similar to the pickups for my wife's electronic tuner for her dulcimer. Just tried iit out with a little battery amp and it was poor.

Oh, that's a pity.
I did hope it would also be a cheap bit of fun to play melodeon through my guitar fx pedal..

Wah-wah melodeon anyone?  ;D
Logged

zippydw

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: Clip on microphone,would it work?
« Reply #3 on: January 08, 2013, 10:17:23 PM »

Seconded on that won't work.

You need something like a SM-57, or wider cardoid sound field if you play basses also as a starting point. The little mikes are not designed with a narrow range which does not let the accordion sound to develop. You will also pick up alot of garbage noise or hum if you crank up the gain
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Clip on microphone,would it work?
« Reply #4 on: January 08, 2013, 11:13:38 PM »

Seconded on that won't work.

You need something like a SM-57, or wider cardoid sound field if you play basses also as a starting point. The little mikes are not designed with a narrow range which does not let the accordion sound to develop. You will also pick up alot of garbage noise or hum if you crank up the gain

Little mics will work fine for starting out on home recording, after all, that's all there is a in a hand-held recorder.
The problem is, this item is not a microphone, it is a piezo pick-up.

It will work fine on instruments with a vibrating sound-board, e.g. violin, guitar, dulcimer, etc.

It will not work with instruments that do not have a vibrating sound-board, e.g. bagpipes, trumpet, accordion.
« Last Edit: January 08, 2013, 11:26:12 PM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Clip on microphone,would it work?
« Reply #5 on: January 08, 2013, 11:19:16 PM »

Lapel mics can work quite well and can be quite cheap. They are usually quite sensitive and omni directional so will pick up louder background noise, but for home recording that shouldn't be a problem. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Clip on microphone,would it work?
« Reply #6 on: January 08, 2013, 11:28:57 PM »

If you're going down the clip on route then look at the ones they use on brass instruments.  I've used saxophone mikes to good effect.

steve
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Clip on microphone,would it work?
« Reply #7 on: January 09, 2013, 12:02:21 AM »

Seconded on that won't work.

You need something like a SM-57, or wider cardoid sound field if you play basses also as a starting point. The little mikes are not designed with a narrow range which does not let the accordion sound to develop. You will also pick up alot of garbage noise or hum if you crank up the gain

Just from live experience I'd say avoid a 57, they tend to kill any dynamics on boxes, a 58'd be better if you have a source of phantom power. Thomann have some cheap condensers in the t-bone line that do an ok job for cheap.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Clip on microphone,would it work?
« Reply #8 on: January 09, 2013, 05:13:05 AM »

Seconded on that won't work.

You need something like a SM-57, or wider cardoid sound field if you play basses also as a starting point. The little mikes are not designed with a narrow range which does not let the accordion sound to develop. You will also pick up alot of garbage noise or hum if you crank up the gain

Just from live experience I'd say avoid a 57, they tend to kill any dynamics on boxes, a 58'd be better if you have a source of phantom power. Thomann have some cheap condensers in the t-bone line that do an ok job for cheap.

An SM58 is a dynamic mic and doesn't need phantom power.  I do agree, though, that for recording in a controlled environment (even if it's just your front room) you'll normally get better results from a condenser.  Thomann do excellent deals on budget equipment that will do a very good job - have a browse through the mics here http://www.thomann.de/gb/microphones.html?sid=783d338105d86614581d05a0667646f4

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Clip on microphone,would it work?
« Reply #9 on: January 09, 2013, 05:48:22 AM »

If you're recording direct to a computer this mic would be an excellent entry-level buy: http://www.thomann.de/gb/the_tbone_sc440_usb.htm
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Clip on microphone,would it work?
« Reply #10 on: January 09, 2013, 01:46:48 PM »

Oop! Well as you say, condenser it up!

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Clip on microphone,would it work?
« Reply #11 on: January 09, 2013, 02:54:34 PM »

If you're going down the clip on route then look at the ones they use on brass instruments.  I've used saxophone mikes to good effect.
steve
Agreed. I use one of those, which has a clip and goose neck. I attach it to the last fold of the bellows on the treble side and it works pretty well. It's a condenser mic, so it needs phantom power.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Clip on microphone,would it work?
« Reply #12 on: January 09, 2013, 03:21:28 PM »

I'd say avoid a 57, they tend to kill any dynamics on boxes, a 58'd be better

An SM58 is a dynamic mic and doesn't need phantom power.

Not only that, but I seriously doubt that an SM58 would ever be better than an SM57 for instrument miking. It's response is seriously bent for close-mic vocals and while it's very good at that, it's not much good for anything else.

Neither would be my choice for recording, but I regularly use an SM57 for live bands.

If you have access to phantom power, I suggest a pair of Behringer C-2. I sometimes use them for my YouTube videos. Two condenser mics, stereo bar, tough case and pop shields for less than £40. What's not to like?
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Clip on microphone,would it work?
« Reply #13 on: January 09, 2013, 04:35:48 PM »

I'd say avoid a 57, they tend to kill any dynamics on boxes, a 58'd be better

An SM58 is a dynamic mic and doesn't need phantom power.

Not only that, but I seriously doubt that an SM58 would ever be better than an SM57 for instrument miking. It's response is seriously bent for close-mic vocals and while it's very good at that, it's not much good for anything else.

Neither would be my choice for recording, but I regularly use an SM57 for live bands.

100% in agreement. Recording via a desk, as opposed to direct to hard drive, I use a pair of Red5 Audio RV8s.  Not exactly in the £40 bracket, but at about £90 apiece still exceptionally good value in the large diaphragm condenser market. I shudder to think what a pair of Neumann U87s would cost.....at least as much as a very good custom hand-built melodeon, I'd guess!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Clip on microphone,would it work?
« Reply #14 on: January 09, 2013, 06:21:51 PM »

If you have access to phantom power, I suggest a pair of Behringer C-2. I sometimes use them for my YouTube videos. Two condenser mics, stereo bar, tough case and pop shields for less than £40. What's not to like?

I use these and find them easy to use, good quality and excellent value.  (:)
Logged
Semper idem, sed non eodem modo

gurdypad3

  • Good talker
  • **
  • Offline Offline
  • Posts: 60
  • Gaillard D-G. Gaillard G-C.
Re: Clip on microphone,would it work?
« Reply #15 on: January 09, 2013, 06:28:42 PM »

I have had good results with the miniature, switched, electret, omnidirectional tie clip mic.
From RS Components. Around £20. One each end clipped to to a tacky pad.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Clip on microphone,would it work?
« Reply #16 on: January 09, 2013, 06:50:26 PM »

I shudder to think what a pair of Neumann U87s would cost.....at least as much as a very good custom hand-built melodeon, I'd guess!

Neumann U87  £1929 each - your estimate is not far off. Now look up the price of a Telefunken U47  :o

One thing about Neumann: you can buy another 10 years later and (a) they are still making them and (b) the old and new mic will have identical responses.

For recording a solo instrument, I'd question the wisdom of going that close with clip-ons - a mic (or stereo pair) on a stand a few  feet away will give a more natural sound. Of course, if your room is full of honking resonances you might need to close-mic to keep the room sound down. There's always compromises...
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Clip on microphone,would it work?
« Reply #17 on: January 10, 2013, 10:10:32 AM »

I have had good results with the miniature, switched, electret, omnidirectional tie clip mic.
From RS Components. Around £20. One each end clipped to to a tacky pad.

Me too, fed into a small 4 input mixer (using just two inputs of course!). Not perfect , but good enough for folk!  >:E
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Clip on microphone,would it work?
« Reply #18 on: January 10, 2013, 10:16:34 AM »

I have had good results with the miniature, switched, electret, omnidirectional tie clip mic.
From RS Components. Around £20. One each end clipped to to a tacky pad.

Me too, fed into a small 4 input mixer (using just two inputs of course!). Not perfect , but good enough for folk!  >:E


Wadja mean "good enough for Folk" ? 4 input cement mixer more like.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Clip on microphone,would it work?
« Reply #19 on: January 10, 2013, 10:23:10 AM »

I have had good results with the miniature, switched, electret, omnidirectional tie clip mic.
From RS Components. Around £20. One each end clipped to to a tacky pad.

I'm confused. I googled tacky pad and all I could find were pictures of saddlery ???
Logged
Semper idem, sed non eodem modo
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal