Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: pokerwork left wrist padding  (Read 6465 times)

0 Members and 1 Guest are viewing this topic.

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
pokerwork left wrist padding
« on: January 11, 2013, 10:54:44 AM »

have just bought  a wrist support from Liddle £2.  It is unobtrusive and velcros round the wrist  and is the best thing I have ever tried to stop pokerwords Lillies etc etc digging in painfully. Perhaps not quite the purpose intended by the maker.  Something on similar lines probably available more expensively from boots or wherever

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: pokerwork left wrist padding
« Reply #1 on: January 11, 2013, 11:21:02 AM »

Thanks George !! .

I never understoood that the lily hadn`t a bevelled case at the bottom, especially given the serious attention to detail in other areas (the etched 1914 & scrolling detail, "black" chromework etc) , can understand it on the pokerwork, it`s thrown together from cardboard-thin plywood
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: pokerwork left wrist padding
« Reply #2 on: January 11, 2013, 02:03:49 PM »

Thanks George !! .

I never understoood that the lily hadn`t a bevelled case at the bottom, especially given the serious attention to detail in other areas (the etched 1914 & scrolling detail, "black" chromework etc) , can understand it on the pokerwork, it`s thrown together from cardboard-thin plywood

I tink you need to take another look at a pokerwork, cardboard-thin plywood, hah  ::)

My Baffetti (costing considerably more than a pokerwork) is make from plywood, and a fine (light and strong) construction material it is too.

George, thanks, I might well have a look in my local Lidl for one of those, though I generally try to avoid it.

The elasticated sports wrist support thingies are indeed good to use with a pokerwork.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: pokerwork left wrist padding
« Reply #3 on: January 11, 2013, 03:48:08 PM »


I tink you need to take another look at a pokerwork, cardboard-thin plywood, hah  ::)

it is cardboard thin, 1 layer thinner corrugated cardboard is about the same thickness - when I was adding decent bellows straps to one, I had no problem pushing a jewellers screwdriver through without much twisting, can`t do that with a Baffetti - it wasn`t a complaint Andrew (it may even help produce the Pokerwork sound) , just an observation that wood (ply or otherwise) that thin doesn`t leave any leeway for bevelling
Logged
Q: How do you cure MAD?
A: Buy more Boxes

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: pokerwork left wrist padding
« Reply #4 on: January 11, 2013, 04:03:18 PM »

I've not actually looked, but I thought Lester said he'd bevelled his to save his wrist.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: pokerwork left wrist padding
« Reply #5 on: January 11, 2013, 04:24:44 PM »


I tink you need to take another look at a pokerwork, cardboard-thin plywood, hah  ::)

My Baffetti (costing considerably more than a pokerwork) is make from plywood, and a fine (light and strong) construction material it is too.


So is my Saltarelle. If it was good enough to build De Haviland Mosquito(e)s.......... ;)
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: pokerwork left wrist padding
« Reply #6 on: January 11, 2013, 04:38:56 PM »

It has always seemed miraculous that they could hang  two12 cylinder merlin engines on plywood wings   they must have weighed around 10cwt  each
george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: pokerwork left wrist padding
« Reply #7 on: January 11, 2013, 04:43:33 PM »

Seems like magic. That's why they had to use Merlins.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: pokerwork left wrist padding
« Reply #8 on: January 11, 2013, 04:55:36 PM »

I bevelled my Pokerwork just like Lester - it really makes a difference.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: pokerwork left wrist padding
« Reply #9 on: January 11, 2013, 05:14:01 PM »

How Rees, there`s nothing much to Bevel (about 3 to 4mm of the ply thickness) unless you add wood first - the bit added to the later ones made mine more uncomfortable than anything, I could have tried bevelling that ........ anyway George's Wristband is a great idea.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: pokerwork left wrist padding
« Reply #10 on: January 11, 2013, 05:31:30 PM »

I cut out some of the substantially thick plywood and inset a piece of quadrant on the Penguin of Death. Now I have a router table I do it differently. When I am home again I will post some images.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: pokerwork left wrist padding
« Reply #11 on: January 11, 2013, 05:50:11 PM »

Puzzled by all this talk of ply,  most of the pokerworks I've seen are built of solid timber, even the recent Chinese ones, and the timber of the casing is usually between 7.5mm and 8mm.   The bass cover plate is usually ply.    Older 2915s with celluloid finish are ply, but that is usually 8mm including the celluloid.   I've just measured several boxes. Plenty of scope for rounding the edge.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: pokerwork left wrist padding
« Reply #12 on: January 11, 2013, 05:53:55 PM »

Puzzled by all this talk of ply, 

That's what comes of being 200 miles from my nearest melodeon.

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: pokerwork left wrist padding
« Reply #13 on: January 11, 2013, 06:13:45 PM »

    Thanks for the heads up, may need to get a wee wrist protector. You can draw blood with the corner of my old Double Ray if you play it enough   ??? ??? ??? ??? ???
Logged

Ellisteph

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
Re: pokerwork left wrist padding
« Reply #14 on: January 11, 2013, 06:59:37 PM »

I use 2 of the longer tennis wristbands, one on top of the other. I find that gives me sufficient protection whichever melodeon I'm playing. Not sure how much they cost, but not astronomical I'm sure. Don't get white like I did - they look pretty grubby at the moment; time in the washing machine means time not playing - or playing with pain!
Logged
Salterelle Connemara III, Loffet Pro C/F

YorkieKen

  • YorkieKen
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 149
Re: pokerwork left wrist padding
« Reply #15 on: January 11, 2013, 07:21:09 PM »

Sharron Shannon uses a huge sponge, looks terrible but it must work for her! I use one of those aforementioned sports wristbands if I'm going to play for long periods, it has a scull and crossbones on it....quite 'sporting' for me. anyway, it's the nearest I ever get to sport these days  :-[
Ken.
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: pokerwork left wrist padding
« Reply #16 on: January 11, 2013, 07:45:09 PM »

I use 2 of the longer tennis wristbands, one on top of the other. I find that gives me sufficient protection whichever melodeon I'm playing. Not sure how much they cost, but not astronomical I'm sure. Don't get white like I did - they look pretty grubby at the moment; time in the washing machine means time not playing - or playing with pain!

the Lidle ones are black so should never need washing!

geroge ;)
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: pokerwork left wrist padding
« Reply #17 on: January 11, 2013, 07:46:30 PM »

I cut out some of the substantially thick plywood and inset a piece of quadrant on the Penguin of Death. Now I have a router table I do it differently. When I am home again I will post some images.

Works a treat.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: pokerwork left wrist padding
« Reply #18 on: January 11, 2013, 08:00:45 PM »

Strange - I play my pokerwork longest and hardest of all my boxes, but I never have this problem.  Perhaps I'm doing it wrong.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: pokerwork left wrist padding
« Reply #19 on: January 11, 2013, 08:10:05 PM »

Real Nen just play until a callous develops then the problem goes away (:)
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal