Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dismantling for beginners.... ?  (Read 3837 times)

0 Members and 1 Guest are viewing this topic.

judgecorp

  • newbie and cheapskate
  • Member
  • *
  • Offline Offline
  • Posts: 19
Dismantling for beginners.... ?
« on: January 13, 2013, 12:46:01 PM »

I'm starting to really like my Stephanelli. It's close to a Hohner Erica in look and feel, but apparently sounds nicer...

Anyway, I've got a stuck button (the C Bass). It seems to be wedged in, (the note keeps playing) and I can't jiggle it to make it come out.

I think the next step is to take the end off. I've got my pliers and will have a go...

Wish me luck... (other suggestions welcome)

Peter Judge
Logged
Stephanelli D/G, Sandpiper D/G

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Online Online
  • Posts: 3706
Re: Dismantling for beginners.... ?
« Reply #1 on: January 13, 2013, 12:58:00 PM »

Unscrewing one end of the bass strap gives easier access to the end panel!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Dismantling for beginners.... ?
« Reply #2 on: January 13, 2013, 12:59:51 PM »

Dismantling is something anybody can do,  its the rebuilding that needs the good wishes.

Once you can see the mechanism, take photographs before taking anything apart.

Good luck!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

judgecorp

  • newbie and cheapskate
  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: Dismantling for beginners.... ?
« Reply #3 on: January 13, 2013, 03:58:52 PM »

That's all good advice, Thanks!

Really interesting to see the mechanism inside.  And the problem turned out to be with a bit of bent wire that links one of the mechanical arms inside - it had flipped upwards and was catching on the inside of the case. I flipped it back, and gave it a gentle squeeze to persuade it not to do it again.

Now, I'm putting it back together again.  Trying to gauge the best way to press and/or bang the pins...

Peter
Logged
Stephanelli D/G, Sandpiper D/G

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Dismantling for beginners.... ?
« Reply #4 on: January 13, 2013, 04:21:28 PM »

I generally use the business end of a firmly closed pair of pliers to push the pins into place.  Don't hammer them into place - a firm push in a straight line is the way to go.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

judgecorp

  • newbie and cheapskate
  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: Dismantling for beginners.... ?
« Reply #5 on: January 13, 2013, 05:27:35 PM »

Thank you!  ... no banging required!

There was a sticky moment when none of the pins would go in, then I realised I'd turned the bellows over, so the holes didn't line up.

All good now, thanks for the encouragement!

Peter
Logged
Stephanelli D/G, Sandpiper D/G

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Dismantling for beginners.... ?
« Reply #6 on: January 13, 2013, 08:04:17 PM »

  then I realised I'd turned the bellows over, so the holes didn't line up.
Peter

You're the first person to do that.  ;)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Online Online
  • Posts: 3706
Re: Dismantling for beginners.... ?
« Reply #7 on: January 13, 2013, 08:14:25 PM »

You're the first person to do that.  ;)

Quite so, nobody else would be silly enough to do that!

Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Dismantling for beginners.... ?
« Reply #8 on: January 15, 2013, 08:49:08 AM »

You're the first person to do that.  ;)

Quite so, nobody else would be silly enough to do that!



Erm, ah?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Dismantling for beginners.... ?
« Reply #9 on: February 07, 2013, 11:45:54 AM »

That literally made me laugh out loud. That would be an interesting playing style... :D
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Dismantling for beginners.... ?
« Reply #10 on: February 07, 2013, 12:32:22 PM »

My screwdriver has a plastic handle with a dish in the end - perfect for pushing bellows pins in with (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Dismantling for beginners.... ?
« Reply #11 on: February 07, 2013, 01:47:24 PM »

I prefer to push in bellows pins with an old 6" flat file; worn, but with just enough left of the teeth to prevent slipping.

Also useful for re-inserting those pesky mushroom-type Hohner reed pins/upholstery tacks (if I feel inclined to replace them, that is.....anyone want a couple of kilos?)
Logged
Tuner/repairer, now retired.

tedrick

  • Guest
Re: Dismantling for beginners.... ?
« Reply #12 on: February 10, 2013, 01:20:42 PM »

question:
so I've pulled the bellows pins and pushed them back several times - I've noticed that they pins are starting to get loose - a couple of them slide in/out very easy -

is there anything you can do to help the pins not fall out? any way you can build up the hole to keep the pin nice and tight?

Reed
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Dismantling for beginners.... ?
« Reply #13 on: February 10, 2013, 04:24:31 PM »

The usual procedure is to plug the hole with a short length of matchstick (usually made of poplar, so ideal for the job) smeared with a tiny amount of wood glue.  If the pin won't push back in drill a tiny pilot hole (1/16in [1.6mm]) or smaller to get it started.  Allow plenty of time for the glue to dry, otherwise you'll just push the matchstick plug straight back out.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Dismantling for beginners.... ?
« Reply #14 on: February 10, 2013, 05:34:26 PM »

If the wood's crushed, rather than abraded, it might work to dampen it a little.  Just the inside of the hole, and let it dry properly. The wood should swell and tighten a little.
Logged
Tony S

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Dismantling for beginners.... ?
« Reply #15 on: February 10, 2013, 05:54:18 PM »

Should have added - DON'T be tempted to use cocktail sticks or bamboo barbecue skewers. You need a "soft hardwood" such as poplar or lime (aka linden or basswood) in order to provide grip for the pins.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Dismantling for beginners.... ?
« Reply #16 on: February 10, 2013, 07:37:38 PM »

I've seen pins dipped in reed wax to increase the grip. But I'm not sure I like it as it's a bit messy!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Dismantling for beginners.... ?
« Reply #17 on: February 10, 2013, 08:30:36 PM »

If you don't mind buggering the pins, and if they're all on one side of the box;
A. Remove the pins not connected to the end with the loose pins.
B. Go inside end with loose pins and bend the end of the pins so they cannot be pulled out.
C. It will mean they never slip, but you cannot easily remove them, and any reed work would be a bugger to do as one end couldn't be freed from the bellows.

Its a fix, but not one I'd recommend  :D
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Dismantling for beginners.... ?
« Reply #18 on: February 10, 2013, 08:35:44 PM »

If you don't mind buggering the pins, and if they're all on one side of the box;
A. Remove the pins not connected to the end with the loose pins.
B. Go inside end with loose pins and bend the end of the pins so they cannot be pulled out.
C. It will mean they never slip, but you cannot easily remove them, and any reed work would be a bugger to do as one end couldn't be freed from the bellows.

Its a fix, but not one I'd recommend  :D

Not a fix, but a buggerup stopgap, which makes an eventual fix more difficult.   If you need a temporary fix to stop pins falling out (eg mid gig?)  then a small piece of sticky tape over the pin is quick, effective and easily removed.  If you use clear tape it is almost invisible.

Replacing the bellows gasket tends to tighten the pins because the pins have to resist the tendency of the new gasket to push the bellows frame away from the case.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Dismantling for beginners.... ?
« Reply #19 on: February 10, 2013, 08:46:02 PM »

A stopgap is a better way to describe it, like I said it buggers it up though  >:E
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal