Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Floppy Bellows  (Read 4427 times)

0 Members and 1 Guest are viewing this topic.

waldoB

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
Floppy Bellows
« on: January 16, 2013, 10:56:07 AM »

Many older instruments have been, and are being, restored by industrious musicians here. Time and patience are often the main ingredient.  One problem I have not seen discussed is older bellows that whilst airtight, have become floppy. I have several older three row instruments with this problem. With a larger instrument I find it quite tiring to play if the bellow flexes excessively in the lateral plane. It takes a lot of work both to pump and keep the bellows under control if they flop back and forth. New bellows tape has helped a little. Has anybody taped the inside folds with a stiffish tape in order to reduce the flexing ? Experiences and advice much appreciated. Thanks. DB
Logged

boxlad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 291
    • Ray Ó Díomasaigh
Re: Floppy Bellows
« Reply #1 on: January 16, 2013, 11:33:33 AM »

From my limited knowledge of this problem, I'd say its time to replace the bellows at this stage. I've seen and own many vintage boxes and when they reach this stage in life if you want playability to be reasonable, replacement is the only viable option..
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Floppy Bellows
« Reply #2 on: January 16, 2013, 02:20:45 PM »

In actual fact many better quality accordions had the inner ridges taped with bookcloth type tape from new as well as using cloth, rather than paper, on the outside.
If you do any retaping inside it might be preferable to use animal glue which will tend to crack and "hinge", rather than pva which may make the folds stiffer than you would want.. 
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Floppy Bellows
« Reply #3 on: January 19, 2013, 07:58:40 AM »

In actual fact many better quality accordions had the inner ridges taped with bookcloth type tape from new as well as using cloth, rather than paper, on the outside.
If you do any retaping inside it might be preferable to use animal glue which will tend to crack and "hinge", rather than pva which may make the folds stiffer than you would want..

PVA can be watered down and a thin coat inside the bellows wood probably work.
I wouldn't recommend animal glue because of the cracking problem. With the movement of the bellows little bits could crack off and end up being sucked into the reeds.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Floppy Bellows
« Reply #4 on: January 19, 2013, 03:07:11 PM »

Unexpected recommendation, coming from someone who usually decries the use of modern adhesives in the repair of historic instruments  ;D
In this instance the cracking is an asset rather than a problem, possibly the reason why builders of concertina bellows still use animal glue or simlar for the hinges.
Sparingly applied it would be unlikely to produce any debris which would, in any case, be underneath the tape rather than in the air space.
(In reality I think you are more likely to get debris from dried out glue in the carcass joints and worn cardboard than from more recently glued tape.)
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Floppy Bellows
« Reply #5 on: January 19, 2013, 03:16:34 PM »

I have heard similar said of hide glue, for a flexible joint, that one flexes the joint just before the glue is finally set set.
This causes the glue to fragment into a myriad of small sections, each holding tenaciously on to the material to which it is applied but not to itself. Thus creating a strong but flexible bond.

Since bellows are generally considered a renewable part, I guess a quick stiffening to get a bit more life out of them is not that big a deal.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Floppy Bellows
« Reply #6 on: January 19, 2013, 03:25:17 PM »

I have heard similar said of hide glue, for a flexible joint, that one flexes the joint just before the glue is finally set set.
This causes the glue to fragment into a myriad of small sections, each holding tenaciously on to the material to which it is applied but not to itself. Thus creating a strong but flexible bond. 

Wish I'd said that, instead of "cracking" ;)
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Floppy Bellows
« Reply #7 on: January 19, 2013, 10:25:48 PM »

I have heard similar said of hide glue, for a flexible joint, that one flexes the joint just before the glue is finally set set.
This causes the glue to fragment into a myriad of small sections, each holding tenaciously on to the material to which it is applied but not to itself. Thus creating a strong but flexible bond. 

Wish I'd said that, instead of "cracking" ;)

Me too!!
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Floppy Bellows
« Reply #8 on: January 19, 2013, 10:34:47 PM »

Unexpected recommendation, coming from someone who usually decries the use of modern adhesives in the repair of historic instruments  ;D
In this instance the cracking is an asset rather than a problem, possibly the reason why builders of concertina bellows still use animal glue or simlar for the hinges.
Sparingly applied it would be unlikely to produce any debris which would, in any case, be underneath the tape rather than in the air space.
(In reality I think you are more likely to get debris from dried out glue in the carcass joints and worn cardboard than from more recently glued tape.)

Incidentally Gang,
I don't decry the use of modern adhesives at all. It's just that old and new both have their advantages and disadvantages and should be used with care . It's just worth knowing what each can do and why.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Jono

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
Re: Floppy Bellows
« Reply #9 on: January 20, 2013, 01:17:18 AM »

I'm new to melodeons. Could you explain what you mean by bellows flexing excessively in the lateral plane. Thanks.
Logged

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Floppy Bellows
« Reply #10 on: January 20, 2013, 04:54:20 AM »

Quote
I'm new to melodeons. Could you explain what you mean by bellows flexing excessively in the lateral plane. Thanks.

The bellow are meant to expand in & out - they're not meant to flex backwards & forwards (towards & away from your body), nor for that matter up & down. I assume that is what is meant.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

waldoB

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
Re: Floppy Bellows
« Reply #11 on: January 20, 2013, 12:18:11 PM »

Thanks, that describes the problem much better than I did.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Floppy Bellows
« Reply #12 on: January 20, 2013, 12:42:16 PM »

Quote
I'm new to melodeons. Could you explain what you mean by bellows flexing excessively in the lateral plane. Thanks.

The bellow are meant to expand in & out - they're not meant to flex backwards & forwards (towards & away from your body), nor for that matter up & down. I assume that is what is meant.

I'm old to melodeons, but still don't get this, bellows are designed to open and shut but also to rotate up and down or front and back. If they only opened ina straight line in and out it would make the box far harder to play YMMV.

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Floppy Bellows
« Reply #13 on: January 20, 2013, 02:16:44 PM »

I think that waldoB's talk of "flexing in the lateral plane" has been subsequently misconstrued.
Presumably he was referring to the fact that when bellows get floppy there is a tendency, unless they are closed in a straight line, for one set of folds to slap together first.
If you compare this to trying to compress a coil spring, other than in a straight line, it must produce some unintended lateral movement?
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Floppy Bellows
« Reply #14 on: January 20, 2013, 02:19:44 PM »

From a bird's eye view, bellows that tend to go S-shaped rather than stay roughly in a straight line?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Floppy Bellows
« Reply #15 on: January 20, 2013, 03:35:03 PM »

From a bird's eye view, bellows that tend to go S-shaped rather than stay roughly in a straight line?

Bit like me then.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Floppy Bellows
« Reply #16 on: January 22, 2013, 09:55:43 AM »

Unexpected recommendation, coming from someone who usually decries the use of modern adhesives in the repair of historic instruments  ;D
In this instance the cracking is an asset rather than a problem, possibly the reason why builders of concertina bellows still use animal glue or simlar for the hinges.
Sparingly applied it would be unlikely to produce any debris which would, in any case, be underneath the tape rather than in the air space.
(In reality I think you are more likely to get debris from dried out glue in the carcass joints and worn cardboard than from more recently glued tape.)

Incidentally Gang,
I don't decry the use of modern adhesives at all. It's just that old and new both have their advantages and disadvantages and should be used with care . It's just worth knowing what each can do and why.

I'm ever so sorry dear Nick,
If you thought I was taking the mick.
Cos its really quite nice,
To hear good advice,
And I'm sure that the the knowledge will stick!
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Floppy Bellows
« Reply #17 on: January 22, 2013, 10:24:25 AM »

Unexpected recommendation, coming from someone who usually decries the use of modern adhesives in the repair of historic instruments  ;D
In this instance the cracking is an asset rather than a problem, possibly the reason why builders of concertina bellows still use animal glue or simlar for the hinges.
Sparingly applied it would be unlikely to produce any debris which would, in any case, be underneath the tape rather than in the air space.
(In reality I think you are more likely to get debris from dried out glue in the carcass joints and worn cardboard than from more recently glued tape.)

Incidentally Gang,
I don't decry the use of modern adhesives at all. It's just that old and new both have their advantages and disadvantages and should be used with care . It's just worth knowing what each can do and why.

I'm ever so sorry dear Nick,
If you thought I was taking the mick.
Cos its really quite nice,
To hear good advice,
And I'm sure that the the knowledge will stick!

Brilliant!
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Floppy Bellows
« Reply #18 on: January 22, 2013, 10:45:56 AM »

Unexpected recommendation, coming from someone who usually decries the use of modern adhesives in the repair of historic instruments  ;D
In this instance the cracking is an asset rather than a problem, possibly the reason why builders of concertina bellows still use animal glue or simlar for the hinges.
Sparingly applied it would be unlikely to produce any debris which would, in any case, be underneath the tape rather than in the air space.
(In reality I think you are more likely to get debris from dried out glue in the carcass joints and worn cardboard than from more recently glued tape.)

Incidentally Gang,
I don't decry the use of modern adhesives at all. It's just that old and new both have their advantages and disadvantages and should be used with care . It's just worth knowing what each can do and why.

I'm ever so sorry dear Nick,
If you thought I was taking the mick.
Cos its really quite nice,
To hear good advice,
And I'm sure that the the knowledge will stick!

Great limerick, but do you recommend PVA or animal glue to make it stick?  >:E
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Floppy Bellows
« Reply #19 on: January 22, 2013, 10:55:54 AM »

Put the hot glue and brushes away,
get a big tub of thick PVA.
(But you'll wind up demented,
thumbs and fingers cemented,
Taping bellows the L. Bailey way) (:)
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal