Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: spoon screws problem  (Read 3007 times)

0 Members and 1 Guest are viewing this topic.

mac

  • Member
  • *
  • Offline Offline
  • Posts: 32
spoon screws problem
« on: January 20, 2013, 11:04:55 AM »

Playing last night and one of my spoons fell off half way through a tune! :o

On inspection the screws are not totally tightening up when rescrewed in place, is it best to just glue them back in or put in slightly larger ones in?

I did think to put a blob of glue in the hole, let it dry and then rescrew them in?

What's the remedy?

 (:)
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: spoon screws problem
« Reply #1 on: January 20, 2013, 11:14:10 AM »

I would remove the spoon completely. Then then glue (PVA) cocktail sticks into the holes and trim off flush and wait for the glue to dry. Then, most important, when refitting the spoon ensure the plate with the screw holes is flush with the case work before doing up the screws. If you rely on doing up the screws to apply the tension to the spring you will just be back where you started (:)

mac

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: spoon screws problem
« Reply #2 on: January 20, 2013, 11:51:44 AM »

I would remove the spoon completely. Then then glue (PVA) cocktail sticks into the holes and trim off flush and wait for the glue to dry. Then, most important, when refitting the spoon ensure the plate with the screw holes is flush with the case work before doing up the screws. If you rely on doing up the screws to apply the tension to the spring you will just be back where you started (:)

Thank you for the advice  (:)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: spoon screws problem
« Reply #3 on: January 20, 2013, 12:14:22 PM »

If you want to do the same job faster the use superglue in place of pva.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: spoon screws problem
« Reply #4 on: January 20, 2013, 12:15:49 PM »

If you want to do the same job faster the use superglue in place of pva.

True but I always stick everything to me and not the intended target with superglue. Plus I use 15 min PVA so time for a cop of tea  ;)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: spoon screws problem
« Reply #5 on: January 20, 2013, 01:47:35 PM »

If you use a cross-linking PVA such as Titebond II it has a very quick grab and you'll be able to refit the screws in about 15 minutes.  Full strength will be reached in about 24 hours, as with pretty well all PVA glues. And it'll be stronger than the surrounding wood.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: spoon screws problem
« Reply #6 on: January 20, 2013, 02:28:28 PM »

This bloke just used to make a new hole?
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: spoon screws problem
« Reply #7 on: January 20, 2013, 02:36:22 PM »

That looks more like a wordworm attack!

Rob.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: spoon screws problem
« Reply #8 on: January 20, 2013, 05:01:29 PM »

That looks more like a wordworm attack!

Rob.

More like an Assagi attack by a hoard of Zulus.
 I think matchsticks are better than toothpicks, but a hard wood would be better.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: spoon screws problem
« Reply #9 on: January 20, 2013, 05:04:39 PM »

If you want to do the same job faster the use superglue in place of pva.

True but I always stick everything to me and not the intended target with superglue.

You put the glue on the wood, not your fingers.   That's where you are going wrong Lester.  ::)
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: spoon screws problem
« Reply #10 on: January 20, 2013, 06:42:50 PM »

That looks more like a wordworm attack!

Rob.

More like an Assagi attack by a hoard of Zulus.
 I think matchsticks are better than toothpicks, but a hard wood would be better.

Matchsticks are traditionally poplar and work quite well; toothpicks tend to be of the bamboo family (OK, grass!), and while they may be gentle on your gums their structure is not ideal for this kind of job. My choice would probably be lime or mahogany - neither terribly dense, but both very stable and workable.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: spoon screws problem
« Reply #11 on: January 20, 2013, 06:47:18 PM »

Matchsticks are traditionally poplar and work quite well; toothpicks tend to be of the bamboo family (OK, grass!), and while they may be gentle on your gums their structure is not ideal for this kind of job. My choice would probably be lime or mahogany - neither terribly dense, but both very stable and workable.

The cocktail sticks I use are wooden - Posh Pricks   :|bl

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: spoon screws problem
« Reply #12 on: January 20, 2013, 07:00:38 PM »

Matchsticks are traditionally poplar and work quite well; toothpicks tend to be of the bamboo family (OK, grass!), and while they may be gentle on your gums their structure is not ideal for this kind of job. My choice would probably be lime or mahogany - neither terribly dense, but both very stable and workable.

The cocktail sticks I use are wooden - Posh Pricks   :|bl

I wouldn't expect anything less..... ;D

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal