having made a reed block for my tommy the original one looks as though the inside of reedchambers is sealed with something maybe pva or varnish can anyone help
A hard varnish inside the reed blocks will slightly reduce the high-frequency absorption of the wood surface giving a slightly brighter sound.
If you build treble horns for loudspeaker compression drivers out of wood (as I've done) then this is certainly the case, and makes an audible and measurable difference to the output at very high frequencies.
On the other hand the sound pressure levels inside such a horn are probably a lot higher than inside a reed chamber, so I wouldn't like to say for sure that the same is true without trying it -- but it could be, and it wouldn't be difficult to prove.
Ian
P.S. This is part of my "5%" guess -- which could just as easliy be 10%, I *did* say it was a guess :-)