Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: No high D.  (Read 2853 times)

0 Members and 1 Guest are viewing this topic.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
No high D.
« on: February 03, 2013, 04:01:50 PM »

What would be the best way to put a high D on a 21 button B/C?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: No high D.
« Reply #1 on: February 03, 2013, 04:36:30 PM »

My 21 button BC (third button start) has push high D on the last button on the outside row with C# on the pull. I found that a bit strange at first having the D on the push, but I got used to it pretty quickly. It seems to make good sense now.
Logged

The Idle Rich

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: No high D.
« Reply #2 on: February 03, 2013, 05:38:12 PM »

Thanks TomB for mentioning you have a high push D on your Cairdin. I just checked my Cairdin standard LMM and was pleasantly surprised to find out that I do as well. My Hohner and Paolo Soprani B/C boxes don't. Until now I only thought my Walters D/C# had a high D.  :D
Logged

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: No high D.
« Reply #3 on: February 03, 2013, 05:40:51 PM »

I'm wondering whether it might better to replace the push E on the C row, so it will be on the same row as the other Ds . It's no more use than the high F# on the B row, at the moment anyway.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: No high D.
« Reply #4 on: February 04, 2013, 12:14:40 AM »

I'm wondering whether it might better to replace the push E on the C row, so it will be on the same row as the other Ds . It's no more use than the high F# on the B row, at the moment anyway.

I've the D on the outside instead of the high F# and I find that I use the high E occasionally (both as a melody note and a grace note). I defintely make more use of it because I've the D below it as well. If you get me.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: No high D.
« Reply #5 on: February 04, 2013, 10:12:56 AM »

I'm wondering whether it might better to replace the push E on the C row, so it will be on the same row as the other Ds . It's no more use than the high F# on the B row, at the moment anyway.

I've the D on the outside instead of the high F# and I find that I use the high E occasionally (both as a melody note and a grace note). I defintely make more use of it because I've the D below it as well. If you get me.

That's probably what I'll do then. Can the F# reed be whittled down to D, or is it necessary to replace it?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: No high D.
« Reply #6 on: February 04, 2013, 01:22:09 PM »

That I'm not sure of, I imagine it's a little far to come down though.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: No high D.
« Reply #7 on: February 04, 2013, 05:29:14 PM »

What say the experienced & professional tuners? F# down to D, or not without replacing the reed?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: No high D.
« Reply #8 on: February 04, 2013, 05:33:36 PM »

What say the experienced & professional tuners? F# down to D, or not without replacing the reed?

Should be doable with some solder on the reed tip, requires skill and dexterity though.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: No high D.
« Reply #9 on: February 04, 2013, 05:57:32 PM »

Going down two whole tones on a high pitched reed could be done with solder, but its a big shift for a small reed and would I expect not respond as well as it should. 

Would it not make more sense to change the top note on the B row from F#/C# to G/D  then it is in effect the next button on the C row?  Gives you the D in the same direction as other Ds and neither reed has to shift more than a semitone. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

kevin curran

  • Guest
Re: No high D.
« Reply #10 on: February 04, 2013, 07:00:14 PM »

there you are....what are the rest of you going on about?.... ;)
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: No high D.
« Reply #11 on: February 04, 2013, 08:03:37 PM »

Going down two whole tones on a high pitched reed could be done with solder, but its a big shift for a small reed and would I expect not respond as well as it should. 

Would it not make more sense to change the top note on the B row from F#/C# to G/D  then it is in effect the next button on the C row?  Gives you the D in the same direction as other Ds and neither reed has to shift more than a semitone.

Then you lose the C# which you really need if you're going to have the D. There wouldn't be much use for the G either. Having the D'' on the push is fine when you get used to it and allows for a nice double stop with the F# below it.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: No high D.
« Reply #12 on: February 04, 2013, 08:12:44 PM »

In that case I would suggest you might need to replace the reedplate to get a good response from the D.   No harm in trying solder loading first of course, you might find the result acceptable, and if its not you still have the option of replacing a pair of reedplates.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal