Accidental Button Helper Key by
KLR71, on Flickr
I added this to my ADG Hohner Corona IIIR a few weeks back. Before I'd tried a longer version that sat in front of the G row on my Corona III with the touch piece of the key in the middle of the keyboard, but on the IIIR there isn't really much room for it, and besides with the key pointed towards the buttons I kept colliding with it; this seems to work just as well if not better, no doubt someone with actual talent could come up something that would work elegantly. I play it with my thumb, as I use two firm shoulder straps that isn't such a big deal for me. I found attempting to play the button in the usual position next to impossible, using whatever method, reaching over with the thumb, strategically having the index finger ready, etc. I thought about maybe holding a chopstick in my teeth...
The construction is super simple, square section brass tubing with brass rod for the key. In the USA we have "hobby shops" that sell materiel for model trains etc, they always have a display stand from the K&S metal company with tubing/rod/sheet. The rod is 1/8" and the inner diameter of the tubing is 3/16", a titch larger; I tried using tubing with ID same as the rod's OD but in the act of bending the tubing inevitably gets a bit distorted and there isn't much slack when you're done, so I went with the mismatched diameters. Again, someone with actual talent could no doubt get these to mesh perfectly.
What's holding it down, you ask? Hide glue, which stringed instrument builders use, as it's soluble in water, thus you can remove parts ipso facto for repairs. Last night I added the bit of wire you see sticking out of the ends of the tubing - a short length presses down on the top part of the key. This is to keep the key from flying up whenever you give it a whack. In the process of trying to add the wire to the key the glue came undone quite easily, it isn't holding things down very stoutly at all. But it stands up to regular playing, and if it comes loose it's just another dab of glue and half hour wait to have it ready for playing again.
I have started in on making a version that would be screwed down, ideally by the screws in the area that are already holding down the keyboard cover. You just need to have flaps extending out from the ends of the tubing, you saw/file off three of the tubing's walls. That's the easy part, bending the rod is proving a bit more tricky though. We'll see how it goes. Hope this is of interest, it's a pity box builders didn't just make 2 1/2 or 3 1/2 rows standard but $$$$/££££/€€€€ talks as we all know.