Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: bad valve or bad reed?  (Read 2632 times)

0 Members and 1 Guest are viewing this topic.

tedrick

  • Guest
bad valve or bad reed?
« on: February 08, 2013, 12:19:04 PM »

Hi Everyone -
I have a bad sounding high A - on my BC Cairdin mini - BC

so the A is on the pull - it sounds like this:

https://soundcloud.com/reedmunson/my-high-a-is-hinky

the problem started coming on a month ago or so - I would do the play the notes around that note/quick hard push/pull-trick and it would seem to restore the note to sounding normally again - but now that trick isn't working -

if you have a chance please take a listen - does it sound like one of the valves has just gotten mis-seated -- or is it a problem with the reed?

Thanks!
Reed
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: bad valve or bad reed?
« Reply #1 on: February 08, 2013, 12:26:54 PM »

Too hard for me to detect which of the notes is a high A, might be better to just play the one note for us.

But judging from the rest of your description I would guess at it being a valve problem.

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: bad valve or bad reed?
« Reply #2 on: February 08, 2013, 01:10:42 PM »

It sounds like something tiny trapped between the reed and reed-plate to me - but it could also be a loose reed in the wax or a reed on the way out - all sound similar.

But as Lester says - from your description of being able to fix it by a bellows waggle to start with does make me think valve too.  You should probably open it up and give the reeds a ping and check around the wax and valves to see if you can see anything odd.

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: bad valve or bad reed?
« Reply #3 on: February 08, 2013, 01:52:32 PM »

I had something similar with my Dino pro, it was a valve that was playing up, and it just needed stroking with a warm finger.
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: bad valve or bad reed?
« Reply #4 on: February 08, 2013, 03:15:51 PM »

If you ping the reed tongue by lifting the tip slightly with a thin piece of brass or something similar and release it, that might work. Whatever it is it sounds easy to fix.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

tedrick

  • Guest
Re: bad valve or bad reed?
« Reply #5 on: February 08, 2013, 06:07:48 PM »

Hi guys -
I have inspected and carefully pinged the reed, smoothed the valve - but I think the A might be on the inner side of the reed plate - so I might be in the position of having to remove the reed plates from their wax in order to see what is going on --

does this sound correct? on a standard BC, would the pull A be on the inner side of the plate?

Reed
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: bad valve or bad reed?
« Reply #6 on: February 08, 2013, 06:12:09 PM »

Hi guys -
I have inspected and carefully pinged the reed, smoothed the valve - but I think the A might be on the inner side of the reed plate - so I might be in the position of having to remove the reed plates from their wax in order to see what is going on --

does this sound correct? on a standard BC, would the pull A be on the inner side of the plate?

Reed

The inside reeds are the suck reeds the outside ones are the blow reeds.

tedrick

  • Guest
Re: bad valve or bad reed?
« Reply #7 on: February 08, 2013, 06:55:40 PM »

so yeah - it's a pull/draw note then - I would have to cut it out - which is something I would not feel comfortable trying....
R
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: bad valve or bad reed?
« Reply #8 on: February 08, 2013, 07:11:00 PM »

You could try lifting the valve on the outside and  gently extending the reed by pushing with a paper-clip through the slot.  A good hard blow will probably dislodge anything that might be obstructing the reed.  You can also shine a torch through the reedblock hole to see if the inner valve is not sitting right.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

oolong32

  • Member
  • *
  • Offline Offline
  • Posts: 48
  • G/C Serafini R2D2, C/F Pokerwork, C/F Hohner Norma
Re: bad valve or bad reed?
« Reply #9 on: February 08, 2013, 08:05:15 PM »

I have a similar issue with the lower D on my G/C box. I've had a look several looks but there seems to be no fluff or similar thing obstructing the reed (it's a push note)  :(
Logged
♭ ♮ ♯

tedrick

  • Guest
Re: bad valve or bad reed?
« Reply #10 on: February 09, 2013, 02:46:26 AM »

Good news - I took the reed block out and played it like a harmonica and freed up what was ever causing the reed or valve to cause the reed not to sound right - might just be a temporary fix though -
we'll see... my box is due for a tuning so I'm looking forward to having my tuner give it a overhaul...
R
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: bad valve or bad reed?
« Reply #11 on: February 09, 2013, 12:34:56 PM »

Just for the record - it probably won't cause any problem but you shouldn't generally blow the reeds in the block like a harmonica as that causes condensation from your breath on the metal and can also cause the valves to stick until it dries out.  I have to say I still do it occasionally though and it should be fine if you let it dry out.

The kind of blowing I was suggesting was a good hard blow from a short distance like blowing out a candle on a birthday cake with the reed lifted.

Whatever - it sounds like there was something, probably miniscule in there and you've moved it - I hope it stays that way!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: bad valve or bad reed?
« Reply #12 on: February 09, 2013, 01:03:13 PM »

Just for the record - it probably won't cause any problem but you shouldn't generally blow the reeds in the block like a harmonica as that causes condensation

And you should never suck a reedblock like a harmonica because you will inhale any dust and rubbish that you dislodge.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: bad valve or bad reed?
« Reply #13 on: February 09, 2013, 01:38:50 PM »

I had something similar with my Dino pro, it was a valve that was playing up, and it just needed stroking with a warm finger.

Don't we all ?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: bad valve or bad reed?
« Reply #14 on: February 09, 2013, 02:47:41 PM »

I had something similar with my Dino pro, it was a valve that was playing up, and it just needed stroking with a warm finger.

Don't we all ?

I'm glad you said that - I've been trying desperately to resist responding in a somewhat unseemly manner......... ;D

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: bad valve or bad reed?
« Reply #15 on: February 09, 2013, 04:40:14 PM »

 >:E
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal