Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Preciosa - what tools ?  (Read 3134 times)

0 Members and 1 Guest are viewing this topic.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Preciosa - what tools ?
« on: February 08, 2013, 07:16:13 PM »

Just stopped crying enough to do some typing.  I've long put off trying my hand at waxing, the excuse being that the only one that needed it was a HA113, not for the faint-hearted, I'm told.  Just got the Preciosa out for a blast and ten treble reed plates have dropped off the middle pan!

Now it's not that long since Theo rebuilt it, so I'm hopeful that this accident won't cause tuning or valve problems, so the question is what tools do people use to get into the miniscule spaces?!  I suspect that the grip the wax gets is minimal at the best and the freezing weather probably didn't do it any favours.  I can't see Charlie Marshall's paintbrush method working so I wonder if anyone has designed a knife to slide between the reedplates?

All advice welcomed!

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Preciosa - what tools ?
« Reply #1 on: February 08, 2013, 11:48:57 PM »

Sorry to hear that has happened, but as you say wax gets brittle at low temperatures.

My method is to fix the first reed at one end, then run a bead of wax down the edge of the first plate on the side where the next one goes, then press the next plate into the molten wax.  You have to be very accurate placing the wax, too much and it will squeeze out below and contaminate the valve or reed, to little and it won't hold. You also have to get the reed plate in fast while the wax is stil liquid. I guess you have no more than a second.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Preciosa - what tools ?
« Reply #2 on: February 09, 2013, 12:03:33 AM »

Yes, I'm guessing that when my heating packed up the box got so cold the wax was embrittled and then once the heating came back on, that great mass of metal expanded... Not a pretty sight!  Please don't think I'm being critical, it's obviously a pig of a job with no room for normal techniques to work.  Studying the pan where the plates have burst out, there is little evidence of wax left on the wood, so presumably anything that allows a little more contact area should effect an improvement.  It could even be that the fact that the reeds had been stuck in with RTV before you rebuilt it my have prevented the wax from penetrating the wood fibres.  The whole scenario is different from normal.  Most reed waxing jobs involve making a generous fillet around the plate, but there is no discernable gap to allow it to form its natural miniscus.

Oh well, time to order some nice fresh wax from Charlie and have a couple of goes at it!

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Preciosa - what tools ?
« Reply #3 on: February 09, 2013, 12:40:45 AM »

I use the same method as Theo. Requires organisation of having all the reeds ready, in order and too hand before embarking on it.

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Preciosa - what tools ?
« Reply #4 on: February 09, 2013, 10:03:29 AM »

Just stopped crying enough to do some typing.  I've long put off trying my hand at waxing, the excuse being that the only one that needed it was a HA113, not for the faint-hearted, I'm told.  Just got the Preciosa out for a blast and ten treble reed plates have dropped off the middle pan!

Now it's not that long since Theo rebuilt it, so I'm hopeful that this accident won't cause tuning or valve problems, so the question is what tools do people use to get into the miniscule spaces?!  I suspect that the grip the wax gets is minimal at the best and the freezing weather probably didn't do it any favours.  I can't see Charlie Marshall's paintbrush method working so I wonder if anyone has designed a knife to slide between the reedplates?

All advice welcomed!

Rob.
I'd take it back to whoever did the work, doesn't seem much of a recommendation, I'm sure they'd help put things right, All the Best mory
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Preciosa - what tools ?
« Reply #5 on: February 09, 2013, 11:10:06 AM »


I'd take it back to whoever did the work, doesn't seem much of a recommendation, I'm sure they'd help put things right, All the Best mory

That's my recommendation too.  I've already been contacted Rob to offer to sort it.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Preciosa - what tools ?
« Reply #6 on: February 09, 2013, 11:14:09 AM »

Good man Theo, no more than I expected from you. AtB mory
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Preciosa - what tools ?
« Reply #7 on: February 09, 2013, 12:25:38 PM »

I'd take it back to whoever did the work, doesn't seem much of a recommendation, I'm sure they'd help put things right, All the Best mory

Late morning after Friday night in the pub...

Theo has indeed offered to repair it FOC - a very kind offer and doesn't reflect at all on his workmanship or attention to detail.  The Preciosa seems to have been designed (?) without any thought for how it held together.  It has suffered an extreme temperature range due to heating problems in my house over the last two weeks and there is an almost solid slab of metal expanding and contracting against the wax.  When assembled, the reed plates are so close together, you can't see whether there is wax between them!  When Theo agreed to re-build this box, it was a wreck with the reeds held in with RTV, bellows like a collander, he could not offer any guarantee at the outset that it would work!

Quite a few people have suggested that the Preciosa concept would make an excellent design for a new box and I think that's true, but not as miniaturised as this!

Rob.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Preciosa - what tools ?
« Reply #8 on: February 09, 2013, 01:01:00 PM »

I'd take it back to whoever did the work, doesn't seem much of a recommendation, I'm sure they'd help put things right, All the Best mory

Late morning after Friday night in the pub...

Theo has indeed offered to repair it FOC - a very kind offer and doesn't reflect at all on his workmanship or attention to detail.  The Preciosa seems to have been designed (?) without any thought for how it held together.  It has suffered an extreme temperature range due to heating problems in my house over the last two weeks and there is an almost solid slab of metal expanding and contracting against the wax.  When assembled, the reed plates are so close together, you can't see whether there is wax between them!  When Theo agreed to re-build this box, it was a wreck with the reeds held in with RTV, bellows like a collander, he could not offer any guarantee at the outset that it would work!

Quite a few people have suggested that the Preciosa concept would make an excellent design for a new box and I think that's true, but not as miniaturised as this!

Rob.
The problem is the fact that wax is used to hold the reeds down without there really being enough room for it to stick to the wood. Other methods (e.g. screws at the ends of the plates) would cure this without needing bigger gaps between the long edges, if only Hohner had thought to do it this way in the first place (difficult or impossible to retrofit).
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Preciosa - what tools ?
« Reply #9 on: February 09, 2013, 01:18:48 PM »

The problem is the fact that wax is used to hold the reeds down without there really being enough room for it to stick to the wood. Other methods (e.g. screws at the ends of the plates) would cure this without needing bigger gaps between the long edges, if only Hohner had thought to do it this way in the first place (difficult or impossible to retrofit).
Maybe that is why Hohner saw fit to nail them in the first place?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Preciosa - what tools ?
« Reply #10 on: February 09, 2013, 01:20:03 PM »

Even with nails they tend to fall out, and on the flying reedblock there is so little wood that even the nails don't have much to grip onto.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Preciosa - what tools ?
« Reply #11 on: February 09, 2013, 01:31:23 PM »

Even with nails they tend to fall out, and on the flying reedblock there is so little wood that even the nails don't have much to grip onto.
Also small nails into thin wood holding down things that vibrate (and which get removed and replaced) is a recipe for disaster, which is why I mentioned *screws*  ::)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Preciosa - what tools ?
« Reply #12 on: February 09, 2013, 02:13:20 PM »

Or indeed a bolt into a threaded insert? Might not have the same effect though.

Just realised that I haven't had a chance to play my preccy in a few weeks and my music room can get quite cold... hmm.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Preciosa - what tools ?
« Reply #13 on: February 09, 2013, 02:38:54 PM »

Suggest you bring it up to room temperature gently!


Rob.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal