Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: cairdin 4 voice problem  (Read 1053 times)

0 Members and 1 Guest are viewing this topic.

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
cairdin 4 voice problem
« on: February 23, 2013, 11:17:44 AM »

friend at session with cairdin b/c 4 voice it has a reed sounding high a# without touching any buttons just pull bellows is it a reed problem or pallet ? seems to be only one reed as it is a low volume sound any ideas what to do ?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: cairdin 4 voice problem
« Reply #1 on: February 23, 2013, 11:26:13 AM »

The pallet is the only way for air to get through the reed to the outside world so that is the first thing to investigate.  If not a pallet then there must be some other air leak to the outside world, such as an open screw hole, or a crack or other defect in the case. The pallet may look ok, but may not be sitting flat, or may be shifted slightly sideways in relation to the holes it is meant to close.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
Re: cairdin 4 voice problem
« Reply #2 on: February 23, 2013, 11:31:32 AM »

thanks it is about 13 years old do you know how lever is fixed to pallet on that model?
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal