Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Fitting bass stop to an Erica?  (Read 2033 times)

0 Members and 1 Guest are viewing this topic.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Fitting bass stop to an Erica?
« on: March 03, 2013, 10:00:44 AM »

Would it be possible to fit a bass stop to an Erica, to remove the thirds? If so, what would be the approximate cost to have it done?
Logged
Harmonica Player
Just starting with the Box

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fitting bass stop to an Erica?
« Reply #1 on: March 03, 2013, 10:06:31 AM »

Yes, possible. Contact me privately for an estimate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Fitting bass stop to an Erica?
« Reply #2 on: March 03, 2013, 10:23:39 AM »

Hi Harmonicatunes,

as Theo says, its very possible  .... see https://soundcloud.com/microbot-2/3voiceericacf

On the recording I play with the thirds out in all the tunes, but the second tune in 2-voice mode shows the thirds-out sound best.

I prefer thirdless chords, so I have it set up so that the default (in) position is thirds out, with the stop pulled out to bring in the thirds. But it's possible to go the other way round.

The work is straightforward enough - fitting a slider,block and pullstop within a sleeve - but the complication comes in the reedwork. Most of the reeds have to be replaced/tuned since the standard Hohner chords are made with thirds on different reedplates - thus for the D/A chords, the C# draw for A major is on a different reedplate from the F# press for the D chord! So you need two new reedplates, one with F#/C# and the other D/E to go with the A/A ...

cheers!

Mike

Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Fitting bass stop to an Erica?
« Reply #3 on: March 03, 2013, 11:37:05 AM »

As you say - quite a trivial job: phone Theo (or other favourite -box-fettler) - agree a price - drop off melodeon - pick it up again

And "Robert's your father's brother". I think even I could manage that!   ;)
Logged
  _       _    _      _ 

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Fitting bass stop to an Erica?
« Reply #4 on: March 03, 2013, 12:37:01 PM »

As you say - quite a trivial job:

Chris - If you read Mike's post you will see that it is not a "trivial job"

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Fitting bass stop to an Erica?
« Reply #5 on: March 03, 2013, 01:29:28 PM »

Thanks for that Lester. If you continue reading mine, you'll come to that smiley with the winking eye ..
Logged
  _       _    _      _ 

Bobtheboat

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
  • 'On the cut' near Lichfield, UK
Re: Fitting bass stop to an Erica?
« Reply #6 on: March 03, 2013, 07:48:09 PM »

Mike added a bass stop to an Erika for me (with a 12 bass conversion too!) and I love it! Well worth the cash. Bob.
Logged
'Rowbotham Erika Extraordinaire' (12 bass + stop G/C/acc), Hohner Liliput Bb-Eb. Castagnari Rik G/C/acc
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal