Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dino Baffetti Carnival 3/ Art 85 GB  (Read 6335 times)

0 Members and 1 Guest are viewing this topic.

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Dino Baffetti Carnival 3/ Art 85 GB
« on: March 07, 2013, 09:36:07 PM »

Two questions, the one listed on:
http://www.themusicroom-online.co.uk/product_info.php/cPath/244_249_485/products_id/3610
The picture has no bass stop, yet the video does. No mention of a bass stop in the descriptions either (I'd love it if the music room did 'basic stats' for their stuff, i.e. amount of voices, buttons, registers etc.) so I'm a tad confused. The Baffetti homepage does show the GB model to have two stops, one each end:
http://baffetti-accordions.com/?page_id=36
Also, are Baffetti's factory made, or hand made? I assume factory made, but as the old saying goes, to assume is to make an ass out of u and me.
Can anyone help me out at all?
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #1 on: March 07, 2013, 10:13:03 PM »

I'm not sure it would have a bass stop. I owned the very first 3 voice Baffetti Binci, essentially a souped-up Carnival III, and the bass end was designed differently from the 2 voice model and it made it impossible to fit a stop. I believe for the production Bincis and Supers the Music Room asked Baffetti to redesign the bass end to make it possible to fit one but I don't know if that was carried over to ordinary production models.

Also, are Baffetti's factory made, or hand made?

Depends what you mean by handmade and factory made. More handwork actually goes into a £150 Chinese factory made guitar than a £3k "handmade" Taylor made with CNC'ed components and sophisticated specialist jigs galore.

Accordions are especially difficult to define that way as they're products of the industrial age so machinery has always been involved, they don't benefit from the handmade aspect as much as other instruments and all builders, in Europe at least, from fairly substantial factories to one-man shows use mostly the same techniques to actually construct the instruments. I have two one-off bespoke boxes being made for me at the moment by individual builders, one of them uses a computer controlled laser cutter extensively and the other is buying a CNC milling machine but both would definitely be called "handmade" instruments. It's really a question of the quality of components, design features and the standard to which they're made and I'd say that Baffettis sit solidly in the mid-market. They're made pretty much the same way as something like a Castagnari but not as finely finished, machine reeds, lower quality timber, etc...
« Last Edit: March 07, 2013, 10:17:00 PM by Andy Simpson »
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #2 on: March 07, 2013, 11:50:25 PM »

I believe that Dino Baffetti manufacture the Saltarelle models and probably at least some of the Paolo Soprani ones, along with their own brand output, so they're definately in the mass production market.  But that isn't the bad news, because their quality control is excellent and their turnover means you get a hell of a lot of box for the money.  The BPII is really a very special box, being bright and lively with an excellent dynamic range and good action.  As discussed elsewhere, the BPIII is not quite as special in that it doesn't perform quite as well as a two-voice, but if you want three voices it's a good way to go.  No three voice box is quite as good as a two-voice as the equivalent dedicated 2-voice!

I've had two Dinos, one three voice, which later morphed into a Saltarelle model, and a BPII and I liked both of them.

The picture quality of the video isn't great, but I couldn't see any stop - the two chrome bits are the press stud for the strap and the rotella to adjust the bass strap. 

Rob.
Logged

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #3 on: March 08, 2013, 12:05:21 AM »

On the video Jon engages and disengages the stop on the bass end. Still confused, I know Jon has an account on here so may ask him direct, whats his username?
And my Uncle rates the Baffetti's highly, loud boxes and a nice sound- nothing compared to his Mory, but that goes without saying.
I'm after a three voice, I have an Erica and to be fair, I'm getting a bit tired of the two voice sound. I know it sounds nice, but I want a more 'expressive' box, and I feel a three voice fits the bill.
Oh and also, they're relatively cheap. I just 100% if it has a bass stop, would be very handy for playing in most keys.

Edit:
And by handmade I mean, are all parts made in bulk, then assembled en masse on a production line. Like Castags all get individual attention and they're a tiny workforce. Is Dino a big factory churning out numbers, as opposed to Castag making a small number per day?

And to add, if it did have two stops, it would pretty much seal the Carnival III as my next prospective box  (:)
« Last Edit: March 08, 2013, 12:20:36 AM by EastAnglianTed »
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #4 on: March 08, 2013, 12:17:30 AM »

I believe that Dino Baffetti manufacture the Saltarelle models ...
I may be wrong but I always understood that Serenellini made some, if not all, of the Saltarelle instruments. You only have to compare the Serenellini 'Cloud' (now 233 De Lux) with the Saltarelle Nuage to see the similarities. Effectively the same instrument, except Saltarelle bump the price up....  :o
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #5 on: March 08, 2013, 12:38:32 AM »

Serenellini did indeed make them originally, then Baffetti started making some models, (f.ex, the Bouebe is actually a rebadged discontinued Baffetti model from the early 90s, or at least based on it...), and at some point Saltarelle consolidated all manufacture of diatonics with Baffetti whilst the chromatic models are made by Mengascini. I seem to remember hearing about someone who had a Saltarelle that was made by Castagnari but that has a definite whiff of the urban legend about it if you ask me.

I don't think there's any real difference in how Baffettis and Castagnaris are actually made, (the grilles on Castagnaris have been laser cut for a while now), Castagnaris are just made more carefully to a higher standard of craftsmanship with better reeds and each instrument has more time spent on it. Some components like buttons, valves, straps and miscellaneous hardware probably even come from the same source...
Logged

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #6 on: March 08, 2013, 12:43:00 AM »

The Oakwood Binci has the option of two left hand stops. I know these are altered out of house by Martin Whyte, but I wonder if a DBCIII could be commisioned with bass stops by the music room and their associates. It would cost a pretty penny however, and they'd probably say no  :(
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #7 on: March 08, 2013, 04:21:17 AM »

I believe it was Roger Watson who said that he had, or had played, a Saltarelle made by Castagnari.  Matter of fact, I recall speaking with  him on the phone about this several years ago.

I have played the Serenellini made Saltarelles and have owned two Serenelli 233 models .. 2 of them... a D/G and a C#/D..
both were better than Dino made Saltarelles of the same model.. Nuage. ... that was  about 8-10 years ago.

As to Taylor guitars.. (acoustic appliances with strings)... they brag that they average less than 7 hands-on man hours in the production of a guitar.  To my ear, they sound like it and feel like it.

« Last Edit: March 08, 2013, 04:25:28 AM by melodeon »
Logged

Guy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 776
  • Not quite enough melodeons....
    • Cats Claw
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #8 on: March 08, 2013, 04:43:58 AM »


I don't think there's any real difference in how Baffettis and Castagnaris are actually made, (the grilles on Castagnaris have been laser cut for a while now), Castagnaris are just made more carefully to a higher standard of craftsmanship with better reeds and each instrument has more time spent on it. Some components like buttons, valves, straps and miscellaneous hardware probably even come from the same source...

The difference is really in scale, variety of models/finishes, and the number of people involved. The Baffetti factory is just that- a large building on an industrial site on the outskirts of Castefidardo, unlike  Castagnari which has more of a 'workshop' feel. They tend to deal in larger numbers- when I went there last they were ready to ship 500 3-rows for the Mexican market (finished in the colours of the Mexican flag!), and were at different stages of construction of similar sized batches destined for Russia and ( as far as I remember) the Far East. They explained how each market required different styles/finishes/layouts etc, so it was about 'economies of scale' in supplying larger orders and working on batches at a time-I would guess that individual orders/modifications would thus be unlikely, or expensive....though there's no harm in asking!
That said, everyone I spoke to seemed to take an interest in their part of the process and committed to producing quality instruments, and (as someone else has mentioned) the actual methods used aren't that different-just much larger in quantity and quicker in construction. Like most things, I guess you get what you pay for...

Cheers,
Guy
Logged
Guy, in South Wales

Cats Claw, http://www.cats-claw.co.uk

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #9 on: March 08, 2013, 04:45:53 AM »

I'm not sure it would have a bass stop. I owned the very first 3 voice Baffetti Binci, essentially a souped-up Carnival III, and the bass end was designed differently from the 2 voice model and it made it impossible to fit a stop. I believe for the production Bincis and Supers the Music Room asked Baffetti to redesign the bass end to make it possible to fit one but I don't know if that was carried over to ordinary production models.

Mine (which I was told by Murray at the Music Room was the second Binci III in the UK) has a stop for the L reeds on the treble and a stop to take the thirds out of the chords. The only other Binci III I've seen is also the same set up, which was recently bought new.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Guy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 776
  • Not quite enough melodeons....
    • Cats Claw
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #10 on: March 08, 2013, 04:53:53 AM »

I'm not sure it would have a bass stop. I owned the very first 3 voice Baffetti Binci, essentially a souped-up Carnival III, and the bass end was designed differently from the 2 voice model and it made it impossible to fit a stop. I believe for the production Bincis and Supers the Music Room asked Baffetti to redesign the bass end to make it possible to fit one but I don't know if that was carried over to ordinary production models.

Mine (which I was told by Murray at the Music Room was the second Binci III in the UK) has a stop for the L reeds on the treble and a stop to take the thirds out of the chords. The only other Binci III I've seen is also the same set up, which was recently bought new.

The Binci 3 that I had for a while had both treble and bass stops too....
Logged
Guy, in South Wales

Cats Claw, http://www.cats-claw.co.uk

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #11 on: March 08, 2013, 07:27:58 AM »

The BP/Carnival II has a simple bass layout similar to a Hohner Pokerwork with no reed sharing but the 3 voice version has/had a 4 voice bass where 2 reeds are shared between the bass and chord that made it impossible to fit a slide without interfering with other reeds. When the 3 voice Bincis appeared on the shelves they definitely had bass stops and I heard that they'd asked Baffetti to redesign the bass end to allow a stop for the thirds to be installed so as far as I know, the one I had, which belongs to Anahata now, is something of an oddity. Given what Guy's said about the setup of the Baffetti factory and that video, it must have been for the ordinary models as well and not just a special for the Music Room.

I know these are altered out of house by Martin Whyte,

It's Martyn Banks who's the man behind the Dino/Oakwood specials, you're confusing him with our very own tuner/repairer/restorer extraordinaire.  ;D
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #12 on: March 08, 2013, 08:53:59 AM »

On the video Jon engages and disengages the stop on the bass end. Still confused, I know Jon has an account on here so may ask him direct, whats his username?


Jon Loomes is the man.  Best just phone the Music Room for a definitive answer. 01274 852020
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Dino Baffetti Carnival 3/ Art 85 GB
« Reply #13 on: March 08, 2013, 06:51:20 PM »

Jon helpfully answered my question. The design changes from time to time, but a new off the shelf DBCIII has a stop for the treble, and a stop for taking the thirds out of the bass end. There is also the option for another stop to be installed on the bass end, to take out the low bass reed, at an additional cost.
Thanks everyone for your contributions, made for great reading  ;D
And yep I did confuse the two Martyn's, hope neither of them mind  (:)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal