Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Low bass reeds  (Read 11794 times)

0 Members and 1 Guest are viewing this topic.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Low bass reeds
« on: December 26, 2008, 10:13:05 PM »

Right then, a couple more questions, this time about bass end reeds:

-- does anyone know what pitch bass reeds come in what size reed frames (e.g. from Voci Armoniche), including helikon reeds?

-- what's the lowest pitched bass reed used on people's melodeons?

All my melodeons (Oakwood 2-row D/G, Castagnari 3-row D/G/acc, Castagnari Tommy G/C) have C (65Hz) as the lowest note and B as the highest note. I expect this is due to the difficulty of fitting lower-pitched (longer) reeds into a normal bass-end reed block -- does anyone else have a "normal" melodeon (not Helikon) with lower basses than C?

I know that with Helikon basses the reeds are mounted flat instead of on blocks which poke up into the bellows, which largely removes the length restriction -- has anyone got a picture of the inside of a Helikon bass end?

I'm wondering if by flat-mounting the lowest bass reeds it would be possible to have lower-pitched bass reeds in a "normal" box -- not as low as a Helikon, but I always think that the higher bass notes in a D/G sound too high-pitched, and it might sound better with low G as the lowest note.

normal D/G -- C-D-Em-G-A-B
low D/G      -- G-A-B-A-D-Em

Or maybe somebody's already got a box like this...

(if "normal" size reeds are used I would expect them to be rather quite and probably slow to start since they'd have to use exceptionally big weights on the reeds, hence the idea about bigger reeds)

Cheers

Ian
« Last Edit: December 27, 2008, 02:27:46 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Low bass reeds
« Reply #1 on: December 28, 2008, 12:01:35 PM »

Come on guys, it can't be that hard to say if your melodeon has a lowest bass note which is lower than C !

Cheers

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Low bass reeds
« Reply #2 on: December 28, 2008, 12:10:38 PM »

Hi Ian.

I've got an old Slovakian Heligonka melodeon. I'll try to get you some pictures of the inside of the bass end.

I do have a paolo D/D# with new Binci reeds. The lowest bass reed is in fact C. (Bmin chord on a C#/D just half a note higher making it possible to get it as the lowest). On my C#/D paolo, B is the highest bass note.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Low bass reeds
« Reply #3 on: December 28, 2008, 12:43:20 PM »

This thread includes photos of the reeds in Hohner Elysium.  Its not accessible at the moment so I cant tell you which pitch is the lowest.

I did some work on an Oakwood a while back where the lowest bass reed was B.  I remember this particularly because the B bass played very weakly.  I resonance effect I suspect because the same reed played perfectly on my tuning bench, and a different reed of the same pitch had the same problem on the redblock.

I've seen some older Hohner two row boxes where the lowest bass reed is Bflat.  Hohner melodeon bass reeds have longer tongues and wider plates than those typically used in Italian boxes, they have a correspondingly larger reed chamber too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Low bass reeds
« Reply #4 on: December 28, 2008, 01:11:28 PM »

This thread includes photos of the reeds in Hohner Elysium.  Its not accessible at the moment so I cant tell you which pitch is the lowest.

I did some work on an Oakwood a while back where the lowest bass reed was B.  I remember this particularly because the B bass played very weakly.  I resonance effect I suspect because the same reed played perfectly on my tuning bench, and a different reed of the same pitch had the same problem on the redblock.

I've seen some older Hohner two row boxes where the lowest bass reed is Bflat.  Hohner melodeon bass reeds have longer tongues and wider plates than those typically used in Italian boxes, they have a correspondingly larger reed chamber too.


Hi Theo

Interesting about the Hohners. I've just pulled all my boxes to bits and measured the reed plate sizes, and I get:

Oakwood D/G (Salpa) : 60x20mm
Tommy G/C (Antonelli) : 55x20mm
Dony D/G/acc (Antonelli) : 63x20mm

All have C as the lowest note, and in each case all the bass reed plates (C up to B) are the same size. Obviously there are different size frames available even from the same supplier, Castagnari must have picked a smaller size to cram them into the Tommy.

On the Elysium -- wow, those reeds are *monsters*! Were they lower pitched or just louder?

Cheers

Ian

P.S. Since piano/chromatic accordions use the same reeds as melodeons, how low do these go? I'm sure the answer is *much* lower than C...
« Last Edit: December 28, 2008, 01:16:11 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Low bass reeds
« Reply #5 on: December 28, 2008, 01:43:25 PM »


Oakwood D/G (Salpa) : 60x20mm
Tommy G/C (Antonelli) : 55x20mm
Dony D/G/acc (Antonelli) : 63x20mm
Hohner Erica/pokerwork are 65 x 25mm
some of the older Hohner diatonic bass reedplates are 70 x 25mm
Quote

All have C as the lowest note, and in each case all the bass reed plates (C up to B) are the same size. Obviously there are different size frames available even from the same supplier, Castagnari must have picked a smaller size to cram them into the Tommy.
which will be one reason why the Tommy has a rather thin bass sound
Quote

On the Elysium -- wow, those reeds are *monsters*! Were they lower pitched or just louder?

Oh yes they are much lower, from memory I think they go down nearly an octave below the usual low bass C.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Low bass reeds
« Reply #6 on: December 28, 2008, 02:26:46 PM »


Oakwood D/G (Salpa) : 60x20mm
Tommy G/C (Antonelli) : 55x20mm
Dony D/G/acc (Antonelli) : 63x20mm
Hohner Erica/pokerwork are 65 x 25mm
some of the older Hohner diatonic bass reedplates are 70 x 25mm
Quote

All have C as the lowest note, and in each case all the bass reed plates (C up to B) are the same size. Obviously there are different size frames available even from the same supplier, Castagnari must have picked a smaller size to cram them into the Tommy.
which will be one reason why the Tommy has a rather thin bass sound
Quote

On the Elysium -- wow, those reeds are *monsters*! Were they lower pitched or just louder?

Oh yes they are much lower, from memory I think they go down nearly an octave below the usual low bass C.

The Tommy I've got -- which dates from the late 80's -- certainly doesn't have a thin bass sound, exactly the opposite (though not as bright as a box with 3 reeds on the bass note), both ends are wonderfully deep and rich sounding, and everyone who's ever played it has thought it sounded fabulous. Which is why I bought it on the spur of the moment (I was visiting Castagnari to collect another box) and had to try and get a million lire our of a bank that barely knew what a credit card was, but that's another story...

I have heard a lot of (newer D/G) Tommys which do sound thin, and I also read somewhere that the construction method for the Tommy bass end was changed sometime after mine was made (but I don't have any details). So maybe the "thin" sound is because they're D/G not G/C (shouldn't matter if the C chord is still the same notes), or because some design change was made, or both -- but it doesn't seem to be because the reeds are slightly smaller.

I agree that smaller reeds won't help with volume and startup, the low bass notes do seem to start a bit more slowly than in my other boxes, but they sound fine when they get there.

So what size (and pitch) bass reeds do chromatic boxes use? I've heard some phenomenally low bass notes out of them...

Cheers

Ian

P.S. I've also played a melodeon from a European maker (Van der Aa? Loffet?) where certainly the B (and maybe the A?) bass note was low not high, but I don't think it went down to G.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Andy Cutting

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
    • Andy Cutting
Re: Low bass reeds
« Reply #7 on: December 28, 2008, 06:40:48 PM »

Ey up Ian. Two of my Mory's have low Bflats. I'd say they were a bit weak but not really noticably.
Hope your all well?
Andy x
Logged
Play the same but better.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Low bass reeds
« Reply #8 on: December 28, 2008, 06:56:19 PM »

Ey up Ian. Two of my Mory's have low Bflats. I'd say they were a bit weak but not really noticably.
Hope your all well?
Andy x

Maybe being in a box the size of a shed helps :-)

Still no low G from anyone...

Ian

P.S. All absolutely spiffing, since you asked.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Low bass reeds
« Reply #9 on: December 28, 2008, 07:49:27 PM »

http://www.flickr.com/photos/21478603@N06/3144272095/
http://www.flickr.com/photos/21478603@N06/3145099210/in/photostream/
http://www.flickr.com/photos/21478603@N06/3144269471/in/photostream/

I hope the link works... The box itself is the same size as a hohner corso, just to give a perspective of how large the reeds are. The helikon reedplates measure 98 mm x 52 mm.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Low bass reeds
« Reply #10 on: December 28, 2008, 11:57:52 PM »

http://www.flickr.com/photos/21478603@N06/3144272095/
http://www.flickr.com/photos/21478603@N06/3145099210/in/photostream/
http://www.flickr.com/photos/21478603@N06/3144269471/in/photostream/

I hope the link works... The box itself is the same size as a hohner corso, just to give a perspective of how large the reeds are. The helikon reedplates measure 98 mm x 52 mm.

Thanks Lars, very interesting -- I'd read that the helikons shared reed plates, now I understand (low reed and octave above share same plate). It's been said that this coupling helps the low reed to start faster, maybe this is true or not. Maybe it also helps lock the pitch of the low reed (less stable) to the octave reeds (more stable). The price to pay is enormous heavy reed plates, separate ones for the octaves would take less space and be lighter (see below).

I guess the tapered shape is to make the frames less heavy -- with reeds this long and low-pitched the plates have to be very thick (8-10mm?) at the tip end because the reed will swing through a large distance, but they can be made thinner at the root end to save metal and weight.

Cheers

Ian

P.S. I had a look at your other photos -- 8 voice (LLMMMMHH) melodeons ?!?!?   My ears are bleeding just thinking about them...
« Last Edit: December 29, 2008, 12:07:29 AM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Low bass reeds
« Reply #11 on: December 29, 2008, 12:14:25 AM »

    Still no low G from anyone... (snip)

   Ian, maybe it's just the way I am .. I'll take most any job from anybody who'll pay me, I'll kiss most any girl who'll kiss me back, and I'll play most any box the way that the manufacturer makes it ... so I haven't thought much about box design but I wonder if it's not the "high G" thing that we have going on with DG and ADG boxes.  The "G" row is the "high row" so it makes sense to me that the manufacturer would pair that one up with the higher pitched bass reeds.  It might not be what we want but it makes sense that they would think that that's what fits.

   Any thought????   BH NC USA
Logged
I love one-rows!  Four reeds kick butt!!!!

Dazbo

  • Mods and volunteers
  • Respected Sage
  • ***
  • Offline Offline
  • Posts: 364
  • Danger MAD Here!
    • My YouTube Channel for melodeons, morris and folk in general
Re: Low bass reeds
« Reply #12 on: December 29, 2008, 12:50:21 PM »

My Tommy from the early 90s (I believe) the lowest bass note was A with G as the highest top note.  I had Pete Grassby lower the reed by an octave as I didn't like it being the highest.  I still think the Tommy has a poor bass sound compared with 3 and four voice bass ends.

I've not done a survey but I thought most DG boxes I'd tried had the bass notes G to E from lowest to highest and my Hohner GC has C as the lowest.  I'm sure I've heard from quite a few players that they can play Donkey Riding just on the bass notes so they must have G as the lowest note.
Logged
Ciao Bellow

Darren

Dazbo

  • Mods and volunteers
  • Respected Sage
  • ***
  • Offline Offline
  • Posts: 364
  • Danger MAD Here!
    • My YouTube Channel for melodeons, morris and folk in general
Re: Low bass reeds
« Reply #13 on: December 29, 2008, 12:56:26 PM »

A bit of thread drift here but I'm sure John Kirkpatrick says in one of his tutor videos that the the D bass note on the pull is a different octave to the push?  This would make sense if the G bass note was higher than the D push note so that the D pull is higher than the G.

Anyone found this on one of their boxes?
Logged
Ciao Bellow

Darren

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Low bass reeds
« Reply #14 on: December 29, 2008, 12:59:00 PM »

The lowest bass note on the Elysium appears to be D1, same as the lowest D on a full size piano.  I've not opened it up to check individual reeds, and it is possible that there is a lower reed in there that is not working at the moment.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Low bass reeds
« Reply #15 on: December 29, 2008, 01:04:53 PM »

A bit of thread drift here but I'm sure John Kirkpatrick says in one of his tutor videos that the the D bass note on the pull is a different octave to the push?  This would make sense if the G bass note was higher than the D push note so that the D pull is higher than the G.

Anyone found this on one of their boxes?

I cant recall ever finding this on boxes I've repaired.  On Hohner boxes its quite common for the D chord to be voiced differently on the push and pull, but never the bass reeds. 

In general bass reeds on German and Italian diatonic boxes are always within a range of 7 notes ie an octave without the lowest note repeated an octave up.  From listening to the instrument being played this can be quite hard to determine, because there are two or three reeds per bass note.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Low bass reeds
« Reply #16 on: December 29, 2008, 01:34:41 PM »

    Still no low G from anyone... (snip)

   Ian, maybe it's just the way I am .. I'll take most any job from anybody who'll pay me, I'll kiss most any girl who'll kiss me back, and I'll play most any box the way that the manufacturer makes it ... so I haven't thought much about box design but I wonder if it's not the "high G" thing that we have going on with DG and ADG boxes.  The "G" row is the "high row" so it makes sense to me that the manufacturer would pair that one up with the higher pitched bass reeds.  It might not be what we want but it makes sense that they would think that that's what fits.

   Any thought????   BH NC USA

I can't resist the urge to come up with a better mousetrap, it's what I do both at work and play -- usually successfully, but not always...

I had thought of that and it's probably one reason for the choice, maybe the other is that the lowest "standard" bass reed is C -- thought I suspect this might not be the case, see below...

Then the question arises, what do they do for boxes in other keys? I know what happens for 2 cases:

--  D/G has lower D row, lowest bass note is C below this tonic : C2 D2 E2 G2 A2 B2
    -- D row basses are D2-G2-A2 going up from tonic
    -- G row basses are G2-C2-D2, tonic is higher than D row bass (like RH), third/fifth lower than D row bass

-- G/C has lower G row, lowest bass note is tonic of C row : C2 D2 E2 F2 G2 A2
    -- G row basses are G2-C2-D2, tonic is high, third/fifth are low (same as G row on D/G)
    -- C row basses are C2-F2-G2 going up from tonic

-- what happens with other boxes like C/F -- do these start on a Bb? (probably given Andy's comment)
-- Bb/Eb (not popular now but used to be) ?
-- A/D ?

To fit with the pitch of the right hand rows the lowest bass note (push) should be the tonic of the lower (outer) row, and the highest bass note (pull on the same button) should be an octave above it instead of being the same; for example:

G/C : G1 A1 C2 D2 E2 F2 G2 , lower G basses G1-C1-D1, higher C basses C1-F1-G2, both go up from tonic

This would probably sound rather good, the pitch of the bass and treble ends matches, bass runs are in the "classic" direction (no inversions). It would need a low G reed, and the pull G chord being an octave above the push one would sound odd if you use both directions in the same tune (which is quite common) so maybe this isn't such a good idea.

Now try this for D/G and it all goes a bit pear-shaped:

D/G : D1 E1 G1 A1 B1 C2 D2, lower D basses D1-G1-A1, higher G basses G1-C2-D2, both go up from tonic
-- upper basses ( C2 and D2 ) are now even higher than a standard D/G !!!
-- first change : D2 ==> D1 (same pitch push/pull), G basses now go G1-C2-D1 which sounds very odd (up to third, big drop to fifth)
-- second change : C2 ==> C1 , now G basses go G1-C1-D1 which sounds better -- hang on, this is "standard" melodeon basses again

I think we can now see why the basses on a D/G ended up as they did at C1-D1-E1-G1-A1-B1, it's a good choice given the constraints. But I happen to think that the higher chords in a D/G are too high-pitched, they intrude into the range of the treble end too much, and lower would sound better.

It probably matters more to have a better sequence of basses on the left hand (think like a bass player) than worry too much about how they're pitched relative to the right hand; tonic lowest is the ideal, third lowest (inverted) is next best, fifth lowest is *definitely* much the worst (Close Encounters of the Third Kind -- or maybe it should have been the fifth kind...)

So for a D/G I'd like G0 A0 B0 C1 D1 E1 ==> G basses are G0-C1-D1, D basses are D1-G0-A0 (inverted). You're right that the fundamental is then lower on the higher-pitched G row, but then the third and fifth are lower on the D row which kind of evens things out.

The big problem is getting reeds down to G0 which start quickly and are loud enough, neither of which you get by adding heavier tip weights to standard size reeds, hence my quest for bigger reeds -- but not helikon-sized, I don't want to go down another octave or more. I'm sure these exist because continental chromatics go all the way down to ludicrously low notes, maybe they're just not standard "diatonic" reeds.

Cheers

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Low bass reeds
« Reply #17 on: December 29, 2008, 01:39:09 PM »

My Tommy from the early 90s (I believe) the lowest bass note was A with G as the highest top note.  I had Pete Grassby lower the reed by an octave as I didn't like it being the highest.  I still think the Tommy has a poor bass sound compared with 3 and four voice bass ends.

I've not done a survey but I thought most DG boxes I'd tried had the bass notes G to E from lowest to highest and my Hohner GC has C as the lowest.  I'm sure I've heard from quite a few players that they can play Donkey Riding just on the bass notes so they must have G as the lowest note.

You can play all sorts on the bass end only but there are often octave jumps; I bet that in 99% of modern D/G boxes the C bass is lowest, it has been on pretty much every one I've ever played -- with maybe an occasional exception where the B is lower, but certainly G is *never* the lowest note.

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Low bass reeds
« Reply #18 on: December 29, 2008, 01:42:18 PM »

A bit of thread drift here but I'm sure John Kirkpatrick says in one of his tutor videos that the the D bass note on the pull is a different octave to the push?  This would make sense if the G bass note was higher than the D push note so that the D pull is higher than the G.

Anyone found this on one of their boxes?

I cant recall ever finding this on boxes I've repaired.  On Hohner boxes its quite common for the D chord to be voiced differently on the push and pull, but never the bass reeds. 

In general bass reeds on German and Italian diatonic boxes are always within a range of 7 notes ie an octave without the lowest note repeated an octave up.  From listening to the instrument being played this can be quite hard to determine, because there are two or three reeds per bass note.

I remember now, Hohners do have different chord inversions on the D on push and pull, I think the push one is lower-sounding (tonic lowest) to go with the D row and the pull one is higher-sounding (third lowest) to go with the G row but I could be wrong...

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Low bass reeds
« Reply #19 on: December 29, 2008, 01:49:36 PM »

My Tommy from the early 90s (I believe) the lowest bass note was A with G as the highest top note.  I had Pete Grassby lower the reed by an octave as I didn't like it being the highest.  I still think the Tommy has a poor bass sound compared with 3 and four voice bass ends.

I've not done a survey but I thought most DG boxes I'd tried had the bass notes G to E from lowest to highest and my Hohner GC has C as the lowest.  I'm sure I've heard from quite a few players that they can play Donkey Riding just on the bass notes so they must have G as the lowest note.

I agree that most Tommys do have a rather weak-sounding bass, even allowing for the fact that they've only got two reeds sounding, the small Oakwoods were the same. One of the changes I got Martyn Banks to make when we were designing the Model 4 was to use bigger reed blocks and add a third reed to the bass note to make it brighter and more similar-sounding to the chord (less "oom-pah" difference) and this was very successful.

None of which explains why my G/C Tommy bass end sounds very different to the newer and/or D/G ones, they should both have C as the lowest note. Maybe Castagnari did change the design to make it easier to manufacture or something, I did read something about this but I can't remember where -- does anyone have any idea?

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal