Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Diagnosing a Weltmeister 1-row melodeon  (Read 4435 times)

0 Members and 1 Guest are viewing this topic.

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Diagnosing a Weltmeister 1-row melodeon
« on: March 24, 2013, 12:37:48 AM »

I recently bought a Weltmeister 1-row off of eBay for US$100 or so. Normally I'm pretty aggressive about messaging sellers asking for a YouTube clip, or calling them to hear it over the phone to ID pitch and condition, but I thought since $100 sounded so low I should just jump on it. I was ticked off, though maybe not surprised, when it arrived since on my tuner it pitched out as a quarter-tone sharp of C across the whole board. I couldn't figure out how it could be so consistently "out of tune", until realisation dawned and I checked absolute pitch on my iPhone. Yep, it's A=453, and not too terribly off by the standard.

I have a few notes that are a bit rattly and a few that are a bit choked. I don't have too much free-reed repair experience, just fixing some Stagi concertina actions by putting on new silicone rubber linkages, and a smattering of string instrument repair. I was hoping y'all could give some suggestions on what to do with this creature to get it sounding better, and in general what to do with it. I kind of bought it on impulse so don't desperately need it, but the A=453 is kind of vexing. Would I be best off just selling it to someone who needs a beater solo/busking instrument where the exact pitch doesn't matter as long as it's decently in tune?

Here's my demo just to show the notes, and some really terrible amateur playing by me. I play some concertina but not too much melodeon, so the bass/chord side is not intuitive to me: http://www.youtube.com/watch?v=p_52CefBSQg

Thanks for any ideas on getting it running smooth, and then figuring out whose hands to get it into!

« Last Edit: March 24, 2013, 12:47:58 AM by MatthewVanitas »
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Diagnosing a Weltmeister 1-row melodeon
« Reply #1 on: March 24, 2013, 07:46:01 AM »

I had one of these and although it`s no Hohner 1040 by a long mile it`s by far the best Klingenthal unified-reedplate 2 voice 1 row I`ve heard of (though admittedly, competition for that title isn`t strong  ::) ) .....

Yup, the reeds are all on two long plates, they`re brass reeds too.. If its a farty sound, it`s likely a valve or two needs replacing, just hope its the ones on the top as unlike the older stuff, the reedplates are waxed in on this model, or were on mine (a right royal pain in the donkey) ..... 

If the sound is a bright jangling, the edges of the slots the reeds vibrate in probably have burrs on the edges , I use the finest wet and dry paper slid gently along the edge after pressing the reed tongue into the slot out of the way to clear them - it`s a delicate operation and I use a Photographers Loupe (like a very powerful eyeglass) to check ..... 

Pics of the inside

« Last Edit: March 24, 2013, 07:50:53 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Re: Diagnosing a Weltmeister 1-row melodeon
« Reply #2 on: March 24, 2013, 04:57:08 PM »

Yup, that's what I've got:






Here's a closeup of the reeds for button #6, the first set with leather valves. On the pull I get a slight sound that's on-pitch, so my vague impression is one reed is sounding (maybe partially clogged) and the other is clogged. Or whatever you call it when the reed can't vibrate freely and has that stifled sound; not like the farty sound you get when a bagpipe's blowpipe return valve isn't closing right, but more just like the reed is jammed somehow, though casual visual inspection isn't showing anything.



Now that I've played it back in a little, the pull-6 and the push-2 (I think) are the only ones that have the "stifled" sound and aren't clear. Button 1 is rattly (the bright buzz) on push and pull. For the melody side all the rest are basically fine, though some a little wet to the point of beating a bit, but more just slightly raucous than out of tune. Some slight similar problems in the bass/chord I haven't narrowed down yet. And what's the deal with the plastic strips on the valves of the lowest bass reeds?






I did have one minor non-reed issue: the grille is a celluloid plate with one wooden spacing bar and the usual cutouts with cloth. However, the grille is bowed and so doesn't perfectly fill its space. Not a huge functional problem, but does leave an unsightly gap, and makes it a pain getting the screws back in when securing it. Is there some way I can bend it straight without busting it? Maybe put it in a big stack of heavy books for a few weeks and see if it flatten out? Or do I just have to accept it always being warped?

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Diagnosing a Weltmeister 1-row melodeon
« Reply #3 on: March 24, 2013, 05:35:22 PM »

The plastic strips are to add springiness to the valves and help them to close fully.  Their presence suggests that the instrument was built in the 1950s or later.

Getting the reeds all sounding  correctly can be difficult, even for someone with experience of reed work. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Diagnosing a Weltmeister 1-row melodeon
« Reply #4 on: March 24, 2013, 07:49:23 PM »

The Grille is made of celluloid, warm it up with a hair drier til its more pliant and then flatten it til it cools
Logged
Q: How do you cure MAD?
A: Buy more Boxes

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Re: Diagnosing a Weltmeister 1-row melodeon
« Reply #5 on: March 24, 2013, 10:26:09 PM »

Quote
Getting the reeds all sounding  correctly can be difficult, even for someone with experience of reed work. 

Got it, given that this is not an unduly valuable box I'm thinking the best thing is to just to do whatever minimally-invasive cleanup I can do and sell it to someone who doesn't mind some roughness on a beater box. Again, might be a great cheap busking piece.

I'm not at all concerned about reed pitch at this point, and even the rattliness I can deal with, but for the reeds that are stifled/choked, is there anything much to be done there? Any way to flush out any dust with compressed air or wash off with rubbing alcohol? If I can just get a few of the "jammed"-sounding reeds playing freely I think this would be ready to sell.

The Grille is made of celluloid, warm it up with a hair drier til its more pliant and then flatten it til it cools

Thanks for the idea; do you reckon I should warm it for a while at a low hairdryer heat, or really whale on it with the hottest setting?
« Last Edit: March 24, 2013, 11:46:03 PM by MatthewVanitas »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Diagnosing a Weltmeister 1-row melodeon
« Reply #6 on: March 24, 2013, 11:09:28 PM »

Unfortunately getting the reeds sounding cleanly does not have a one-shot method.  Compressed air is likely to do more harm than good.  You could try ultrasonic cleaning.  The valves would have to bed removed  before that, but replacing all the valves is a key part if getting the reeds working.  For the reeds themselves you have to take it one reed at a time and do what it takes to get them working. Holding the reed up to a strong light will help to identify  reed tongues that are striking the reedplate, dealing that could mean centralising the tongue, removing burrs from the edge if the tongue or the edge of the slot, or removing corrosion. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Diagnosing a Weltmeister 1-row melodeon
« Reply #7 on: March 25, 2013, 01:16:09 PM »

Give it some socks with the Hair dryer, the worst that can happen is that it gets a bit floppy - flatten it between two books afterwards to cool
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Diagnosing a Weltmeister 1-row melodeon
« Reply #8 on: March 28, 2013, 06:01:41 AM »

I agree with the hair dryer method for flattening the grill. you will want something really flat to press it with (smooth wood is good) , and you have to be fast. It cools really quickly.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Re: Diagnosing a Weltmeister 1-row melodeon
« Reply #9 on: March 28, 2013, 05:21:54 PM »

I spent a good amount of time on it with a hair dryer on the hottest setting, but the celluloid didn't seem to heat up anywhere near as hot as I expected it would, even after a few minutes. I tried to keep moving the flow around the plate to keep the temperature even so I wasn't melting one section and leaving the rest, but maybe that's part-why it didn't get too hot. Definitely warmish to the touch but not terribly hot.

Not wanting to mar my books, I put a 30lb toolbox atop it, checked in the morning and it's flater but not perfect. Might leave it a week and see if the slow pressure helps too. Once I have it at least somewhat flatter I'll screw it back on and be done with this one, it's good enough to make a fun busking piece for someone, no point trying to gild the lily.


Besides, I have another small "project" to puzzle out. As some of y'all might have seen on the Buy Sell section, I bought a 1-row long-distance from a French guy in Maine (state bordering Quebec), and turns out it's a rare HA-113 in A. Poor storage has made it a little nasty (spoons terribly corroded, looks grungy, bellows a bit musty), but the three banks of reeds are largely sounding clean and almost totally in-tune, and the action is about as good as any other HA Hohner. I'm tempted to do a full disassembly, sponge off the grime, air out the bellows, re-valve and re-wax, and take it to the local tuner for a touch-up. I'd imagine such a box in proper fettle is worth a good US$500+ given the rarity of the tuning and general paucity of A 1-rows, though honestly I might just leave the work to the next buyer and sell it off to the Cajuns over on their forum. I've got an Anglo concertina and about four Appalachian dulcimers awaiting repair right now, and been meaning to make a Japanese Ainu tonkori out of a cedar 2x4...  :P

I didn't want to make a new thread for a quasi-related repair job, particularly as I might leave most of the work for the next owner, but if anyone is interested in seeing old beater boxes I put detailed pics in Buy Sell, as well as video of each note being played, and I thought to be clever and have an additional video showing an electronic tuner reacting to the playing to demonstrate how close to pitch it is. If anyone has any thoughts about how I'm either wimping out by not doing the fixup myself and getting a better markup, or how I'm being overly optimistic about how repairable this one is, I'm open to critique.
 
Thread: http://forum.melodeon.net/index.php/topic,11953.0.html

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal