Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: .  (Read 7181 times)

0 Members and 1 Guest are viewing this topic.

aradru

  • Member
  • *
  • Offline Offline
  • Posts: 42
.
« on: March 26, 2013, 01:36:04 AM »

.
« Last Edit: October 13, 2015, 01:11:16 AM by . »
Logged

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Busilacchio
« Reply #1 on: March 26, 2013, 02:21:10 AM »

The white in particular is very pretty; if it had been the C/C# I probably would have at least tried it out/considered buying it.

Just wondering, the 50s Paolo I have has the double lever action that I see these don't; do you know is the action on the old grey Paolos the single action like this or is it like the 50s Paolos with the double levers?

Is this the Busilacchio-made Paolo you meant?
http://www.facebook.com/photo.php?fbid=139079536115038&set=a.139074686115523.18218.118875051468820&type=3&theater

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Busilacchio
« Reply #2 on: March 26, 2013, 02:37:21 AM »

Ah I just knew because I spent some time looking at the Paolo-porn on Martin's facebook. I think most of them are long gone unfortunately. Does your grey sound grey paoloish? I might give Martin a shout myself, I'm considering getting regulator-style basses on my Paolo, I'd want them on new reed blacks though, so I could keep the old ones. Anyway, off-topic as they say.

Did you sell that white G/C in the end?

Also, I see I'm not the only one keeping musicians hours around here!

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Re: Busilacchio
« Reply #3 on: March 26, 2013, 02:52:07 AM »

The witness may have tried to lead you.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Busilacchio
« Reply #4 on: March 26, 2013, 08:53:52 AM »

The white in particular is very pretty; if it had been the C/C# I probably would have at least tried it out/considered buying it.

My reaction too, and I was minded of the 1990s Gaillards, he also used to round the corners, but says. "not possible" nowadays.  I guess you need thicker wood, more weight etc, but they were also very robust.

Curious that the same shape, painted, loses its undefinable charm?
Logged
  _       _    _      _ 

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Busilacchio
« Reply #5 on: March 26, 2013, 09:55:48 AM »

Hi all,

I'm no expert on Paolo Sopranis or Busilacchios.  Most of the experts I've met don't get on the internet to talk about them, unfortunately (though it's great to hear sometimes from some very knowledgeable folks here).  But I have seen a few of each of those labels (and other similar Italian boxes) over the years.  Yes, some early Paolo Sopranis had a direct lever action on both rows -- including some of the early grey ones, I think, based on photos I've seen.  But there were also some versions of Paolos that had an action with double levers, pretty early on.  If I had to guess, I'd say the bright blue Paolo G/C in the photo below might be from the late 1930s or 1940s.  Its reedblocks are interchangeable with the red "grey type" aluminum-grille Paolo that sure looks 1940s to me, in the second photo.  Both boxes have (different types of) double-lever action . . .  but both are 4 voice LMMM, so maybe that was a factor influencing which action went in (compound levers to get enough lift for the inside row pallets?). 

There were a few different models of those Busilacchio 2 -voice, 2-row boxes, and also some 1-rows with very similar styling.  Then there were 2-voice Paolos made on a very similar body style.  The two 2-voice boxes shown together in the third photo below, a Busilacchio and a Paolo, each have direct-opening (single-lever) pallets, if my memory is correct.

I've seen the 1-row rounded, celluloid-covered Busilacchios with different kinds of action and springing.  Seems like a time of much experimentation, trading of parts between different workshops, and special orders by the retailers around the world.

PG

edited to add:  BTW both red Paolos, the 4 voice and the 2 voice, were originally stepped-keyboard boxes with naked-aluminum stepped keyboard plates.  Both were converted to a flat aluminum keyboard plate.  The 2-voice red Busilacchio, somewhat like aradru's, was always a flat-keyboard box and originally in C/C#.
« Last Edit: March 26, 2013, 10:03:12 AM by pgroff »
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Busilacchio and Paolo Soprani boxes.
« Reply #6 on: March 27, 2013, 02:05:34 AM »

Here's that 2-v Paolo in Paul's picture, conversion completed and fully restored, originally in F/Bb with a stepped keyboard, now in A/A# with a flat keyboard. Paul supplied the box, reeds and new keyboard plate and Yves Hélie took it from there. 

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Busilacchio and Paolo Soprani boxes.
« Reply #7 on: March 27, 2013, 02:21:19 AM »

Great, Steve!

Hope to hear that one some day now that it's up and running.

Now that I see the photos of the little red Paolo (your pic and my old pic), it does resemble the grey one at the link that LDBosca posted -- including details of the ribbed aluminum grille, black piping, celluloid-covered "feet" on the bass side, etc.  I wonder if that grey one is also a 2 voice, and whether its flat aluminum keyboard plate is original or another conversion:

http://www.facebook.com/photo.php?fbid=139079536115038&set=a.139074686115523.18218.118875051468820&type=3&theater

PG
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Busilacchio and Paolo Soprani boxes.
« Reply #8 on: March 27, 2013, 02:37:21 AM »

Hi aradru,

I don't really know who made any of these, but I would guess that the two red 2 voice boxes might have been made in the same town at around the same time.  Maybe the bodies at least were made in the same workshop or factory, which might have been Busilacchio.  I've heard that Busilacchio (among others) made some very good boxes under contract for Paolo Soprani.

I did own both those little 2 voice boxes at one time but sold both as projects.  I had a lot of unfinished projects around when I had to close my music shop, and no cash to get them completed since I don't do much work on accordions myself.

The two 2-voice red boxes were different from one another in many ways including details of grille, action, keyboard, buttons, keys of the reeds etc.  But they do have quite a resemblance.  & I would say the red Paolo is especially similar (not identical) to the grey one mentioned -- for example those "feet" are very distinctive and from what I can see they are similar.

BTW I really like the way the Busilacchios of this period sound and play, though the ones I've had don't play like Paolo Sopranis.  In the first pic here are two 1-row boxes.  The red one isn't labeled but looks much like some of the early Busilacchio 2-rows with ribbed grille, and has coil springs if I remember correctly.  The blue one is labeled, is probably from the 1950s or 1960s, and has a different kind of action.  The latter model also shows up in red.  Second pic is a group of Busilacchios I think, though not all labeled as such.

Oh, your comment about not needing the double-lever action for a 2-voice box makes sense to me, and in fact I've seen simple levers on boxes with 3, 4, 6, and even 8 voices.  But as I mentioned in regard to the deep blue Paolo, I would guess (only a guess) that the double lever action was probably more likely to be seen earlier on the boxes with 4 or more voices.

PG
« Last Edit: March 27, 2013, 02:45:01 AM by pgroff »
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Busilacchio and Paolo Soprani boxes.
« Reply #9 on: March 27, 2013, 12:28:58 PM »

Here's that 2-v Paolo in Paul's picture, conversion completed and fully restored, originally in F/Bb with a stepped keyboard, now in A/A# with a flat keyboard. Paul supplied the box, reeds and new keyboard plate and Yves Hélie took it from there.

I would love to see photos of the innards. The mechanism, reed bocks, etc... If you have some handy.

I do have some handy, as a matter of fact, but these are all from before the restoration. Haven't had a look under the bonnet since then, but a lot of work was done (bit by bit, over a period of nearly 4 years!). As for a sound file or video clip, I will get round to that, but I will probably wait until after I have taken it back to Yves for a bit of spot retuning - a couple of reeds have moved a bit over the few weeks I've had it in the house. Because of size restrictions I'll have to upload them in separate posts even though they are smallish.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Busilacchio and Paolo Soprani boxes.
« Reply #10 on: March 27, 2013, 12:30:52 PM »

Reed blocks. Wouldn't be hard to fit another one in there I think!

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Busilacchio and Paolo Soprani boxes.
« Reply #11 on: March 27, 2013, 12:31:20 PM »

Bass blocks.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Busilacchio and Paolo Soprani boxes.
« Reply #12 on: March 27, 2013, 04:01:36 PM »

No, aradru, I'm definitely NOT contemplating major surgery on that beast. But a bassoon Bb voice, wouldn't that have a lovely growl?

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Busilacchio and Paolo Soprani boxes.
« Reply #13 on: March 27, 2013, 07:16:09 PM »

By any chance, did Jackie Daly try it out?

Not yet... I'm going to the final stop of their tour tomorrow night though. Maybe I'll take it along!

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Busilacchio and Paolo Soprani boxes.
« Reply #14 on: March 30, 2013, 12:17:13 PM »

Steve, what type of springs are in your Paolo?
Did you leave this original mechanism in place?
On the new reeds that you had installed, what tuning did you use?

The reason I ask is because I am contemplating a conversion of my grey Busilacchio from C/C# to C#/D or maybe D/D#.
I would go ahead with it only if I can achieve a sound approaching the Paolo sound.
Given that my Busilacchio is similar to your Paolo, do you think that with the proper tuning, my box could sound like a Paolo?
A difficult question to answer definitively I know, but your opinion would be appreciated.

I actually don't know what springs there are, but yes the original mechanism was left in place. The only alteration was to reprofile the ends of the wooden levers to accept the new buttons. This turned out to be more complicated than envisaged but has worked out well, although the buttons are a bit higher than I would have liked ideally.

The inner row has the original Bb reeds, which are of very good quality according to Yves. Paul took the outer-row A reeds from a 1940s Baldoni. Getting an acceptable result out of them involved a lot of TLC and some alterations to the chambers, which were of course designed for lower-pitch reeds (F not A). Another option, suggested by Mike R, was to use the original F reeds: by shifting them around and tuning up or down here or there, he calculated, they could serve as A reeds without too much intervention.

That's about all I can tell you. Whether your Busilacchio could sound like a Paolo, I don't know and I think that others on here, for example Paul, would be better placed to answer. I just play the things! I do know that Theo and Mike R think that tuning a set off reeds up or down a semitone is, although feasible, generally not advisable, since it weakens the reeds and leaves little room for further tuning. Am I right, lads?

If so you could use your existing C# reeds and look for a set of compatible D reeds. I'm sure you'd get a lovely box out of it - maybe it doesn't need to sound like a Paolo and can stand on its own feet as it were?

By the way I trust we are all pronouncing the name of this make correctly as Busila-kio and not -cheeo (the h in Italian hardens a c or a g, which is why we don't say spa-jetti).  (:)

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Busilacchio and Paolo Soprani boxes.
« Reply #15 on: March 30, 2013, 01:12:38 PM »

Hi all,

To echo and supplement Steve's comments, I always thought that little Paolo had great potential and I'm delighted that Steve has had the project completed.  Definitely the chambers in reedblocks need to be appropriately sized to the reeds to get a powerful sound, so it's good that Steve's tuner did that. 

Steve, if you are sure you will be happy with a low button height on that box, you could have it.  The buttons were custom-made with screws that could be unscrewed from the button if needed. Then the bottom of the buttons can be sanded down.*  I had the buttons made thick enough so that they *could* be set up to project well from the keyboard plate if desired -- some folks like that, either because they are used to the feel of high buttons or because they want the key travel.  Together with the "stop position of the buttons when depressed" (that's determined by the mechanism, the lever dimensions, and the felt under the levers), the height of the buttons above the keyboard can determine the amount that those buttons travel to open the pallets.  So it's a variable that affects the airflow of the box as well as the playing style.  But if a low height at rest is a higher priority, then sand down the bottom surface of all the buttons to make them thinner and they won't project so high.  You may possibly get less key travel though, depending on those other variable dimensions.

As far as sound . . . to me each accordion sounds very individual, especially ones that old that have each had their own unique history.   But even unrestored, Steve's 2 voice low-keyed Paolo sounded brilliant to me and I also like the 2-voice Busilacchios very much, for whatever my opinion is worth as a middling player.  I have a very small 4 voice Paolo D/C# whose couplers give a 2-voice MM sound as one option, and I think the even smaller boxes with only 2 voices and no couplers give a similar sound.  But -- to me -- the compact size of the boxes with only 2 voices makes them handle much differently.

PG

* I would do them all at once -- double-stick tape to affix the rounded tops to a very flat board, then sand the bottoms on sandpaper glued very flat to a very flat surface like glass or another board.
« Last Edit: March 30, 2013, 01:28:29 PM by pgroff »
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Busilacchio and Paolo Soprani boxes.
« Reply #16 on: April 03, 2013, 12:27:06 AM »

Aradru, yes I realized afterwards that I had failed to answer your question about tuning. That's another thing I don't know. I didn't even tell Yves how to tune the box, but he knows I like a bit more moisture in the sound than he would put for himself. and the result is fine by me. I think the difference is probably around the 10 cent mark in the middle of the range. I might just get him to put a few cents more in there for a bit more of a Paolo rasp and roar when you play hard... I'm working up to making a clip for you. (:) 
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal