Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Easier way to get the keyboard off a newish (chinese I guess) Pokerwork?  (Read 2552 times)

0 Members and 1 Guest are viewing this topic.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford

Just changing the keyboard on a newish Chinese (I guess) Pokerwork, and finding it tricky to get the keys down far enough to slide the old (one piece) keyboard out.  Anyone got a good trick?  I've used a couple of paint brushes to "lift" the pallets, but still can't quite achieve it.  I thought I'd ask before struggling with it.

The action on this one does seem to be already better than the old ones, but the owner wants one of the wooden keyboards with a thumb groove fitted.

No visible action limitation seems to have been fitted.
« Last Edit: March 30, 2013, 07:50:05 PM by brianread »
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

The newer keyboards have a felty material under the keys to semi-restrict the key movement that makes removing it more difficult that normal. But I can normally get them off by brute force and ignorance starting at one end and pressing down each key and removing the keyboard a bit diagonally.

Worst case I had was where someone had introduced cardboard under the keys, in the ensd I decoupled all the springs and unscrewed the action to release the whole shooting match to allow me to remove the cardboard.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford

thanks Lester, I knew i could rely on you! I'll just try a bit harder!!
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford

Ok, finally managed it, I had to disconnect the springs, but not take out the whole key mechanism.

as you can see from the photo, there was some foam in there to limit the action making it very hard work to get out. Is this standard?  I suspect so, but am open to being told not so.  If so, it means that Hohner has finally responded to the long years of criticism!
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

Ok, finally managed it, I had to disconnect the springs, but not take out the whole key mechanism.

as you can see from the photo, there was some foam in there to limit the action making it very hard work to get out. Is this standard?  I suspect so, but am open to being told not so.  If so, it means that Hohner has finally responded to the long years of criticism!

As I said above The newer keyboards have a felty material under the keys to semi-restrict the key movement that makes removing it more difficult that normal.   ;)

I think it maybe their response but it is hopeless, doesn't restrict the action enough, makes keyboard removal difficult.
« Last Edit: March 31, 2013, 11:29:47 AM by Lester »
Logged

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford

I think it maybe their response but it is hopeless, doesn't restrict the action enough, makes keyboard removal difficult.

Agreed.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford

The keyboard kit came with 1 strip of thin white felt and 1 and a bit strips of thicker black felt.

When I did one of these before it came with only white felt, so i'd used a complete width of white felt and then built up the inner key areas with a couple of thicknesses of the while as well.

So, this time I used the whlte felt all the way across (as I did before), then tried to use one piece of the thicker black felt for the inner keys - but it is tooo thick!  Do you use the black felt as a complete width then build up the inners with white?  I'm not sure that the black might still be too thick for the inners, so I though I'd ask before trying it!  It does depend where you put the wooden wedge I guess, I measured to the same place as I'd done before.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

Instruments vary in the positioning of the levers relative to the case.  Some Chinese Hohners, with thick pallet facings have a packer strip under the action, which will make a difference to how you pack under the keys.   I find that the wooden wedge often does not work and then I just use felt.   You have to cut the felt into individual pieces to add the right amount of padding for the inner row keys.  If you use a continuous length it will prevent the outer row keys from travelling far enough. There are many small variations between instruments so you have to adjust the keyboard setting process to the individual box.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford

Worked out well in the end.  Pete tells me that the "mk2" keyboard kit does not need the wooden wedge as the backplate is thicker, however I'd already glued it in, and lacking a large french penknife (Melodeon Makers would understand that!), I decided to leave it and use the white felt, some of which I still had from the previous time I did this, so a layer of white and a singe layer of white on white where required for the inner rows has resulted in a very good job.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

and lacking a large french penknife (Melodeon Makers would understand that!),

 (:)
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal