Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: squeaky button  (Read 3411 times)

0 Members and 1 Guest are viewing this topic.

Jono

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
squeaky button
« on: April 03, 2013, 02:52:42 AM »

Hi, one of my right hand buttons on a 2 row melodeon with a plastic keyboard is squeaking when I press the button in. The button tends to lean on one side of the hole, and rubs against the plastic keyboard when I press, unless I remember to press in such a way that avoids this. Anyone know of a quick repair for this? Maybe  glue a bit of plastic in the hole. I'm a bit engineeringly challenged though, not being much of a handyman.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: squeaky button
« Reply #1 on: April 03, 2013, 06:00:48 AM »

If you take off the grill you might be able to get access to the button arm, and bend it over a bit.
 A quick fix would be to rub the inside of the button hole with the tip of a pencil, the graphite should stop the squeaking.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: squeaky button
« Reply #2 on: April 03, 2013, 07:35:01 AM »

Kimric's right.
Definitely DON'T glue anything into the hole. It will be easy to take the grill off and gently bend the button arm back to its proper position.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: squeaky button
« Reply #3 on: April 03, 2013, 08:17:10 AM »

A quick fix would be to rub the inside of the button hole with the tip of a pencil, the graphite should stop the squeaking.

What an excellent fix that is! Forgot completely the magic qualities of graphenes, useful in so many ways.
Logged
  _       _    _      _ 

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: squeaky button
« Reply #4 on: April 03, 2013, 08:58:16 AM »

A quick fix would be to rub the inside of the button hole with the tip of a pencil, the graphite should stop the squeaking.

What an excellent fix that is! Forgot completely the magic qualities of graphenes, useful in so many ways.

So is KY jelly >:E
You put it on the bedroom doorknob and it stops the kids getting in. Graphite might do the same thing.
« Last Edit: April 03, 2013, 09:01:09 AM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Jono

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
Re: squeaky button
« Reply #5 on: April 06, 2013, 01:17:30 AM »

Thanks everybody, I haven't had time to attend to the melodeon yet but as soon as I do I'll report back here.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: squeaky button
« Reply #6 on: April 06, 2013, 10:18:20 AM »

A very useful tool for this job is a pair of round-nosed pliers, the finer, longer variety like these.

If you push the button down to its fullest extent, you can get the pliers on to the lever arm close to the button and it is then relatively easy to adjust the position of the button in the hole by very slightly bending (and possibly slightly twisting) the lever arm. You only need a slight adjustment - a millimetre is probably enough. Do it in small stages and check the button clearance each time.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal