Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Leather reed valve  (Read 8187 times)

0 Members and 1 Guest are viewing this topic.

Etienne

  • Student in push-pull things
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
    • ça s'pousse et ça s'tire
Leather reed valve
« on: April 03, 2013, 11:36:13 AM »

Hello, i'm actually in the process of refurbishing an old hohner presswood and i have to replace all the old leather valves. As there is a good leather shop next to my home i find more convenient and sheaper to buy a skin from them and then cut valves by myself than to order readymade valves from a shop. I read in "the in and out of accordions" that lamb leather is the best for this purpose but that you have to take care about thickness and direction of the skin before cuting the valves. For thickness i will have no trouble since i can look after the old leather valves, but how to determine the "direction" of the leather (that mean nothing for me) and what is the direction i have to choose ? If anyone here have any experience with that kind of job i will be happy to have some advice.
Logged
Old hohner and old Dedenis
http://pousser-tirer.blogspot.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Leather reed valve
« Reply #1 on: April 03, 2013, 12:08:14 PM »

Best advice I can give is to use ready made valves.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Leather reed valve
« Reply #2 on: April 03, 2013, 12:14:26 PM »

Proper valves that will work aren't terribly expensive and are readily available, making your own is a hell of a lot of unnecessary extra work and a total false economy IMO. Cutting your own from a section of hide won't be significantly cheaper, (possibly even more expensive), take forever to do and the leather used for accordion reed valves has been specially treated for that purpose so DIY valves probably won't perform as well.
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Leather reed valve
« Reply #3 on: April 03, 2013, 12:37:34 PM »

Hi Etienne,

I completely agree with Theo and Andy ... another major reason for not making your own valves, as I found many years ago when working with concertinas, is that the valves you can buy ready-made have been 'stamped' out, not cut.

The act of cutting your own valves with scissors distorts the leather, as does even the most careful work with a scalpel/Stanley blade. It is almost impossible to reproduce the vertical cutting movement, which is exerted simultaneously all round the valve, when using a stamp. You can easily end up with a valve that does not lie perfectly flat; it is important to get the valve to 'seat' absolutely flat on the reedplate.

I'd go to CGM Musical - Charlie will sort you out with some good leather valves with a range of sizes, and 'boosters' where necessary.

cheers

Mike R
Logged

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Leather reed valve
« Reply #4 on: April 03, 2013, 12:46:27 PM »

Hello, i'm actually in the process of refurbishing an old hohner presswood and i have to replace all the old leather valves. As there is a good leather shop next to my home i find more convenient and sheaper to buy a skin from them and then cut valves by myself than to order readymade valves from a shop. I read in "the in and out of accordions" that lamb leather is the best for this purpose but that you have to take care about thickness and direction of the skin before cuting the valves. For thickness i will have no trouble since i can look after the old leather valves, but how to determine the "direction" of the leather (that mean nothing for me) and what is the direction i have to choose ? If anyone here have any experience with that kind of job i will be happy to have some advice.

Personally I wouldn't bother with leather valves, they are more trouble than they are worth and have a limited lifespan. I always use vinyl and vinyl /vileda these days as they are much more reliable and will last virtually forever.
There are some who say they can tell the difference in tone but if there is any it is minimal.

Martyn 
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Leather reed valve
« Reply #5 on: April 03, 2013, 12:48:22 PM »

Personally I wouldn't bother with leather valves, they are more trouble than they are worth and have a limited lifespan. I always use vinyl and vinyl /vileda these days as they are much more reliable and will last virtually forever.
There are some who say they can tell the difference in tone but if there is any it is minimal.

Martyn

I agree especially re the reliability/longevivity

Etienne

  • Student in push-pull things
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
    • ça s'pousse et ça s'tire
Re: Leather reed valve
« Reply #6 on: April 03, 2013, 01:29:29 PM »

So not a good idea... but always one to ask here before making a mistake ! (and a lot of inacurate work)
Thank you all for your advices.
As my first idea was to made valves by myself, leather was a good choice, but now... i think i will go for the vinyls as my ears not so fine to tell wich kind of valves are in my boxes before opening them.
Logged
Old hohner and old Dedenis
http://pousser-tirer.blogspot.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Leather reed valve
« Reply #7 on: April 03, 2013, 04:38:54 PM »

It is worthwhile to use leather valves in the lowest, largest reed, anything below the G above middle C.  Vinyl valves can be quite noisy in the larger sizes, and vileda (a kind of artificial leather substitute)  is not quite as flexible as leather.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Leather reed valve
« Reply #8 on: April 03, 2013, 05:26:08 PM »

It is worthwhile to use leather valves in the lowest, largest reed, anything below the G above middle C. 

This is what I've been doing, instead of either/or.  I don't like the sound of the vinyl valves on the low reeds, and the leather seems to curl quickly on the high reeds. 

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Leather reed valve
« Reply #9 on: April 03, 2013, 06:47:31 PM »

I agree with all the above. Don't try doing it yourself . Charlie  will certainly sort you out.
  As for leather direction. It's the same for paper. The fibres all sit in a certain direction. It's easy to find the grain direction of paper( I have a video on my website) But leather is a separate problem .
 I never knew that leather had a grain direction until a surgeon came into the workshop.
He said "Leather is skin, you put a scalpel through it ; it cuts easily one way and not the other"
 I still can't tell the difference. But there is :M

Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Etienne

  • Student in push-pull things
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
    • ça s'pousse et ça s'tire
Re: Leather reed valve
« Reply #10 on: April 03, 2013, 09:50:56 PM »

On his website Thierry Benetoux sells leather valves reinforced with plastic, does anyone have allready try this kind of stuff ? And i think the man have same opinion as you as he sells vinyl valves only for trebble.
Logged
Old hohner and old Dedenis
http://pousser-tirer.blogspot.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Leather reed valve
« Reply #11 on: April 03, 2013, 10:02:54 PM »

Yes I use those leather valves with plastic reinforcement.  They are much the best for the lower reeds.  I get them from Italy where they are widely used by accordion manufacturers.  If you have difficulty finding a supplier please contact me by PM.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Etienne

  • Student in push-pull things
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
    • ça s'pousse et ça s'tire
Re: Leather reed valve
« Reply #12 on: April 10, 2013, 12:46:28 PM »

Thanks Theo, i finnally find a retailer here, in the way to avoid that my bank charge me with currency change.
Logged
Old hohner and old Dedenis
http://pousser-tirer.blogspot.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal