Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Stepped vs. flat keyboard for B/C/C#  (Read 3864 times)

0 Members and 1 Guest are viewing this topic.

julietabirch

  • Member
  • *
  • Offline Offline
  • Posts: 8
Stepped vs. flat keyboard for B/C/C#
« on: April 04, 2013, 06:50:00 AM »

Hi, all,

I could use some advice about a Castagnari Benny I'm in the process of ordering, tuned B/C/C#. I had assumed the stepped keyboard was my only choice and didn't think much about it, but I was informed today that Castagnari will actually build this with a flat keyboard upon request.

Now, I started the B/C system on a Tommy with a stepped keyboard, and I never noticed any problems associated with this. It seems, though, that players of semitone boxes (other than Sharon Shannon) are pretty fervent about the necessity of having a flat keyboard, and I'm wondering if anyone can explain why this is. Sliding inwards would be easier, but not everyone even uses slides, so that can't be the reason, can it? I've heard that they're faster -- but why would that be?

If anyone has any advice, explanations, or other thoughts about this as it relates to a B/C/C# box, I would love to hear it!

Incidentally, the bass end is going to have 12 free bass notes in a Hayden/Wicki layout.

Thanks so much in advance!
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #1 on: April 04, 2013, 08:31:15 AM »

You stole my layout! :P

http://ukebert.wordpress.com/2012/10/25/inside-and-out-part-5-the-impiliput/

Best of luck with it, hope that you enjoy playing it as much as I enjoy playing my Liliput (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #2 on: April 04, 2013, 10:49:34 AM »

I've got both a stepped and flat C#/D/G now, and frankly notice little difference. You do perhaps have to flex your dital finger joint more for 'flat' - but is that good or bad?

NB I don't do super fast Irish ornamentation, and when the session becomes a race I tend to stop playing "on principle". 

Logged
  _       _    _      _ 

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #3 on: April 04, 2013, 04:47:24 PM »

There are plenty of old discussions about stepped vs. flat, the advice wouldn't be any different for a 3 row.  Gist of it is that sliding from row to row will be smoother sounding.  In his B/C tutor Damien Connolly likens it to playing the fiddle; a smoother sound results when you bow a whole bunch of notes in one direction.  If you change the bow direction for each note the sound becomes choppier, the notes detached from one another; you achieve the same result on the accordion by not sliding around.

Incidentally if sliding is important to you make sure the buttons are set low.  I've a B/C/C# with very low and light action, it's hard not to slide between buttons/rows; it's much more difficult to do this with my other 3 rows, whose buttons are set higher/stiffer.  My ADG is having its action lowered at the moment for this reason, it's really crucial for playing Irish music, for me anyway.  I'm having an ADG Rik built and contacted my dealer to make sure that Castagnari set it up low/light.  You might want to do the same.
Logged

julietabirch

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #4 on: April 04, 2013, 05:06:04 PM »

You stole my layout! :P

Wow! This is fantastic. Personal message coming your way...
Logged

julietabirch

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #5 on: April 04, 2013, 05:16:34 PM »

There are plenty of old discussions about stepped vs. flat, the advice wouldn't be any different for a 3 row.  Gist of it is that sliding from row to row will be smoother sounding.

This is good information. I did go through and read all the past discussion I could find before posting, but it seemed like everyone's recommendations were pretty wishy-washy: along the lines of "Sure, Irish players tend to prefer a flat keyboard, but you can really do either, so just choose what you like." I wasn't able to find anything at all to explain the very strong opinions I've frequently heard elsewhere that you MUST have a flat keyboard on a semitone box, unfortunately never accompanied by any rationale.

I don't think I've ever even tried sliding, so I don't have an opinion about this at this point. I do have a concern about low action resulting in my fingers falling into the holes; I don't know if this is something Castagnari could prevent by limiting the button travel?

Would you be able to give a couple specific examples of places in particular tunes where you would slide? Is it just in fast and/or ornamented passages?
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #6 on: April 04, 2013, 06:46:21 PM »

 a very interesting box!  . Given a choice I would advocate a flat keyboard  if possible.   However  the flat - v - stepped keyboard is not  the entire story.  With a stepped keyboard it is the amount of step that matters  and a very small step  is not too bad. The problem with stepped keyboards on a 3 row   is  that    you are effectively going 'uphill' when going from outide to middle or inside rows which of course happens frequently.  Going 'uphill '  can ( depending on amount of button protrusion as well)  result in a finger bumping into the side of a button unless lifted slightly more than is required on a flat keyboard.  For those who favour sliding this is even more likely to happen.

As to fingers  getting stuck down holes  its just a question of getting the hang of pressing them lightly rather than trying to bang them down against a stop.

A you tube clip of your new box  would be  appreciated

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Inventor

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 117
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #7 on: April 04, 2013, 07:26:44 PM »

Whilst it might be rather difficult on the bass end of a Liliput; on a full size British Chromatic, had you considered repeating some of the bass notes from one end to the other ?  i.e. :-

                          B E L L O W S

          (Db)   (Eb)    (F )   (G )   (A )   (B )   (C#)   (D#)

     (Gb)   (Ab)   (Bb)   (C )   (D )   (E )   (F#)   (G#)   (A#) 

                      H A N D    S T R A P

This would involve no extra Bass reeds, but merely 5 linking rods to link the D# to the Eb etc.
Even a couple of linking rods (G#/Ab & D#/Eb) to give 14 buttons, gives all the most commonly used keys with an easy fingering.

Had you also looked at the Darwin/Serafini Bass layout to give usefull chords as well ?
 
Inventor.
« Last Edit: April 04, 2013, 07:32:48 PM by Inventor »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #8 on: April 04, 2013, 07:40:50 PM »

I considered that option for mine. In the end I decided that space considerations were just a bit too tight. I haven't missed the extra notes yet, but some doubtless would.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

julietabirch

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #9 on: April 05, 2013, 05:37:24 PM »

Thanks to everyone for your thoughts!

I spent some time last night with my Paolo Soprani B/C/C# trying out slides, and I actually found it rather difficult to slide inward even with a low, light, flat keyboard. Outward is easy because the finger is already over the target button, but in sliding inwards, the fingertip still has to get up and over the button somehow. Of course, my half hour of practice doesn't really give me the authority to say much of anything.

Would anyone be able to suggest a sequence of notes in a particular tune where they would particularly want to be able to slide inward?

I would certainly love to have a Darwin bass, or even two more bass buttons either with their own reeds or with linkages, but my budget is limited and I imagine Castagnari would charge some pretty big money for that kind of custom work. I will ask about staggering the buttons, though.
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #10 on: April 05, 2013, 06:00:40 PM »

Sliding inward is always going to be awkward. I play a 2-row halfstep box and don't do it, whereas I slide outward very frequently.

sine labore

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #11 on: April 10, 2013, 08:41:56 AM »

Sliding inward is always going to be awkward. I play a 2-row halfstep box and don't do it, whereas I slide outward very frequently.

I am aware that sliding is common enough on a B/C for Irish, but have been told at a workshop for B/C/C# Scottish that sliding should be avoided. Confused 😳
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #12 on: April 10, 2013, 11:19:35 AM »

Sliding inward is always going to be awkward. I play a 2-row halfstep box and don't do it, whereas I slide outward very frequently.

I am aware that sliding is common enough on a B/C for Irish, but have been told at a workshop for B/C/C# Scottish that sliding should be avoided. Confused 😳

Well, there are Irish teachers who say that sliding should be avoided wherever possible, too. The confusion is easily dealt with, IMO. Ask the teacher why/he thinks sliding is a bad idea, and consider the answer carefully. If you are persuaded, follow their method. If you are of a more independent turn of mind, experiment with both styles of fingering for a while, and then make up your mind what you want to do.  (:)

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #13 on: April 10, 2013, 12:01:25 PM »

I agree with Steve about experimenting with both styles of fingering  . I would add that  perhaps rather than seeing them as entirely different styles they are different tools in a toolbox   and  both can be used within the same tune   or even to get between the same 2 buttons on different occasions depending on where you are coming from and where you are going and what you have available in teh way of fingers at that particular point in time!

 For what its  worth Sir Jimmy Shand  the King of the BCC#  did not advocate slides

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

julietabirch

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Stepped vs. flat keyboard for B/C/C#
« Reply #14 on: April 11, 2013, 01:16:37 AM »

Thanks again for everyone's input -- I just placed the order and asked for a flat keyboard. I decided it's better to at least give myself the option of sliding inwards if I decide I want to use that technique, and I can definitely see circumstances where it could potentially be useful. I'll upload some videos when it arrives, something like a year from now!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal