Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Two-voice tuning tips  (Read 13581 times)

0 Members and 1 Guest are viewing this topic.

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Two-voice tuning tips
« Reply #20 on: January 05, 2009, 11:19:40 PM »

  2hz sharp/2hz flat is a very small difference.  Do you mean 2cents? 

Nope, I definitely mean Hz. At A440 (A above middle C) a semitone is about 25Hz, so 1Hz is about 4 cents, so +/-2Hz is about +/-8 cents.

4 beats per second between reeds is somewhere between "swing" and "musette" tunings depending where you are on the keyboard, definitely louder sounding than swing, not as unpleasantly warbly as an old-style musette -- listen to some of the 1930s Paris cafe musette recordings if you want to hear what really "wet" tuning sounds like!

Ian 

   And it has the advantage of getting away from the logrithmic nature of the spread of note across an octave.  As Normand Miron explained his tuning to me (and it's very similar to Ian's and I expect probably similarly derived), he said "set one reed above the pitch at about 6-7 cents and the other about 5-6 cents below -- then make the others (all tuned above and below) so that the beat rate is the same up and down the keyboard".  Normand uses "cents" to set the basic tone, establish the wetness, and beat rate, then goes over to beat rate; Ian thinks "beat rate" all the way through.

   This tuning form also keeps each note and each octave in tune with itself -- especially important on a 4-reed, one-row instrument. If you're playing an octave (the "A" fifth button and "D" eighth button on a "D" box, for instance, you're playing:

5th button                       8th button
a reed at 880 Hz               a reed at 1760 Hz   
2 that sound like 440         2 that sound like 880 Hz
a reed at 220 Hz               a reed at 440 Hz

so, the octave is entirely in tune with itself; every note (single reed note and every "perceived" one) is in a perfect octave with that reference 440.

   On the other hand, "conventional" tuning is out of tune with itself.  If you have a three-reed box:

a reed at "concert" (i.e. 440)
a reed at "tremulo" (i.e.  444)
a reed at "octave"  (i.e. 220)

your ear will hear the low at 220 and the other pair in tremulo but at about 442 -- the reeds at that note will make the note sound out of tune with itself.  Play two buttons (4 apart on the fingerboard) that are already out of tune with themselves and you get a further out of tune jumble, partly because of the beat rate and the logrithmic nature of the scales and partly because your individual buttons are already out of tune. You avoid the out of tune effect on a two-reed instrument playing a single button but it comes back if you play octaves; and the two-reed instrument is out of tune with pianos, concertinas, flutes, etc. even if you're not playing octaves!

   The "Dedic" (or "Miron" or "Viennese") is definitely much better!
Logged
I love one-rows!  Four reeds kick butt!!!!

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Two-voice tuning tips
« Reply #21 on: January 05, 2009, 11:45:00 PM »

  2hz sharp/2hz flat is a very small difference.  Do you mean 2cents? 

Nope, I definitely mean Hz. At A440 (A above middle C) a semitone is about 25Hz, so 1Hz is about 4 cents, so +/-2Hz is about +/-8 cents.

4 beats per second between reeds is somewhere between "swing" and "musette" tunings depending where you are on the keyboard, definitely louder sounding than swing, not as unpleasantly warbly as an old-style musette -- listen to some of the 1930s Paris cafe musette recordings if you want to hear what really "wet" tuning sounds like!

Ian 

   And it has the advantage of getting away from the logrithmic nature of the spread of note across an octave.  As Normand Miron explained his tuning to me (and it's very similar to Ian's and I expect probably similarly derived), he said "set one reed above the pitch at about 6-7 cents and the other about 5-6 cents below -- then make the others (all tuned above and below) so that the beat rate is the same up and down the keyboard".  Normand uses "cents" to set the basic tone, establish the wetness, and beat rate, then goes over to beat rate; Ian thinks "beat rate" all the way through.

   This tuning form also keeps each note and each octave in tune with itself -- especially important on a 4-reed, one-row instrument. If you're playing an octave (the "A" fifth button and "D" eighth button on a "D" box, for instance, you're playing:

5th button                       8th button
a reed at 880 Hz               a reed at 1760 Hz   
2 that sound like 440         2 that sound like 880 Hz
a reed at 220 Hz               a reed at 440 Hz

so, the octave is entirely in tune with itself; every note (single reed note and every "perceived" one) is in a perfect octave with that reference 440.

   On the other hand, "conventional" tuning is out of tune with itself.  If you have a three-reed box:

a reed at "concert" (i.e. 440)
a reed at "tremulo" (i.e.  444)
a reed at "octave"  (i.e. 220)

your ear will hear the low at 220 and the other pair in tremulo but at about 442 -- the reeds at that note will make the note sound out of tune with itself.  Play two buttons (4 apart on the fingerboard) that are already out of tune with themselves and you get a further out of tune jumble, partly because of the beat rate and the logrithmic nature of the scales and partly because your individual buttons are already out of tune. You avoid the out of tune effect on a two-reed instrument playing a single button but it comes back if you play octaves; and the two-reed instrument is out of tune with pianos, concertinas, flutes, etc. even if you're not playing octaves!

   The "Dedic" (or "Miron" or "Viennese") is definitely much better!

Perfectly summed up -- so why doesn't everybody do it?

Ian

P.S. Yes I know, inertia, lack of clear thinking, and "we've always done it this way" are probably the answers :-)

P.P.S. Your ears actually hear (and like/dislike) beats per second between reeds which is why I define this, cents are just a way of expressing a small fraction of a semitone. Anyone can count and understand beats per second, very few could tell you what a 10 cent difference at middle C actually sounds like.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Two-voice tuning tips
« Reply #22 on: January 06, 2009, 08:40:42 AM »

Ian

Any chance of a recording so we can hear the sound rather than talking about it?

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Two-voice tuning tips
« Reply #23 on: January 06, 2009, 09:03:50 AM »

Lester: aren't three CDs from the Committee Band enough to give you an idea?

I think the reason why more of us don't have our boxes retuned to Viennesse is purely expense!  You've got me think about which I should do, now...

Rob.
Logged

Dazbo

  • Mods and volunteers
  • Respected Sage
  • ***
  • Offline Offline
  • Posts: 364
  • Danger MAD Here!
    • My YouTube Channel for melodeons, morris and folk in general
Re: Two-voice tuning tips
« Reply #24 on: January 06, 2009, 11:03:22 AM »

Two reeds at 438/442, you hear 440 with 4 beats per second.
Two reeds at 878/882, you hear 880 with 4 beats per second.

Ian, thanks for the reply but I was trying to ask if there isn't some extra beating between the 438/878 and 442/882 octaves and was this noticible? I presume not as you say they sound perfectly in tune, perhaps just a slight variation in the amplitude of the beats.
Logged
Ciao Bellow

Darren

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Two-voice tuning tips
« Reply #25 on: January 06, 2009, 06:59:15 PM »

Wow! It seems that we may find as many tuning preferences as melodeon technicians or players!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Two-voice tuning tips
« Reply #26 on: January 06, 2009, 07:05:31 PM »

Wow! It seems that we may find as many tuning preferences as melodeon technicians or players!


Indeed!

In the last few months we've had Just tuning and Dedic tuning.
How about "Just Dedic"?
I'll bet Theo's been there and bought the tee-shirt.  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Two-voice tuning tips
« Reply #27 on: January 06, 2009, 07:57:44 PM »

Well...

In my opinion there is still a big miss from Ian's tuning scheme.  Yes octaves are more in tune (if you can really talk about an instrument being "in tune"  when it has two sound sources 4Hz apart but that is another discussion) but if you are in equal temperament then you still have the horrible sounding major thirds that are almost 15cents too wide to be in tune.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Two-voice tuning tips
« Reply #28 on: January 06, 2009, 08:29:22 PM »

I love brass instruments... where "in tune" takes an entirely different meaning...
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Two-voice tuning tips
« Reply #29 on: January 06, 2009, 08:31:25 PM »

Interesting, Theo. One of the things I've noticed about box tuning in general is that a bit of tremolo takes that very real horrid edge off the major thirds. My MMM box, having three registers, allows me to demonstrate this very convincingly by playing major 3rds with one voice (very ugly), then two, then three, getting progressively softer and more palatable with each voice.

Are you saying that Dedic tuning, with its 4 beats per second, doesn't soften the blow?

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Two-voice tuning tips
« Reply #30 on: January 06, 2009, 09:38:23 PM »

Lester: aren't three CDs from the Committee Band enough to give you an idea?

I think the reason why more of us don't have our boxes retuned to Viennesse is purely expense!  You've got me think about which I should do, now...

Rob.

I was thinking of just a Ian on his own, probably treble end only so I can hear it :-)

EeeJay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 642
  • Old Grey Paolo
Re: Two-voice tuning tips
« Reply #31 on: January 06, 2009, 09:57:44 PM »

I was thinking of just a Ian on his own, probably treble end only so I can hear it :-)

Voilà! A whole load of Ian's chunes as MP3s... ;D

Ed J
« Last Edit: March 18, 2011, 08:29:12 PM by EeeJay »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Two-voice tuning tips
« Reply #32 on: January 07, 2009, 12:09:31 AM »

Yes Steve I agree with you completely, except that its not the Dedic tuning that softens the major thirds, its the tremolo, and I'm yet to convince myself that in a blind test I could tell a Dedic tuned box from a conventional tuned box with 4Hz tremolo across the range.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Two-voice tuning tips
« Reply #33 on: January 07, 2009, 12:23:47 AM »

Yes Steve I agree with you completely, except that its not the Dedic tuning that softens the major thirds, its the tremolo, and I'm yet to convince myself that in a blind test I could tell a Dedic tuned box from a conventional tuned box with 4Hz tremolo across the range.

I bet you could, many other people certainly seem to be able to :-)

The major thirds are just as "equal-tempered-out-of-tune" with Dedic tuning as any other tuning, it's just that we've all got used to the nastyness of equal temperament.

Ian

P.S. Yes equal temperament is kind of horrible, it would be even better if most folky instruments used Aaron's mean-tone quarter-comma tuning (I think this is the one -- which I reinvented independently several hundred years later -- <sigh>) which would sound *much* better in the common keys -- but would sound horrible played together with equally-tempered instruments...

P.P.S. Go here and have a play if you want to hear the differences:

http://pages.globetrotter.net/roule/js/acc.htm
« Last Edit: January 07, 2009, 12:27:50 AM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Two-voice tuning tips
« Reply #34 on: January 07, 2009, 01:01:31 AM »

Well...

In my opinion there is still a big miss from Ian's tuning scheme.  Yes octaves are more in tune (if you can really talk about an instrument being "in tune"  when it has two sound sources 4Hz apart but that is another discussion) but if you are in equal temperament then you still have the horrible sounding major thirds that are almost 15cents too wide to be in tune.

The ear hears two sources 4Hz apart (e.g. 438/442Hz) as 440Hz with 4Hz tremolo/vibrato, the tones are too close together for the ear to pick them out as individual notes when played together (look at some of the papers about how the ear and brain interpret sounds, about frequency resolution and tonal masking).

I agree completely about equal temperament, its sole benefit is that it's equally horrible in all keys :-)

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Two-voice tuning tips
« Reply #35 on: January 07, 2009, 01:12:07 AM »

Interesting, Theo. One of the things I've noticed about box tuning in general is that a bit of tremolo takes that very real horrid edge off the major thirds. My MMM box, having three registers, allows me to demonstrate this very convincingly by playing major 3rds with one voice (very ugly), then two, then three, getting progressively softer and more palatable with each voice.

Are you saying that Dedic tuning, with its 4 beats per second, doesn't soften the blow?

The ear picks out fluctuations in the mean signal amplitude as beats when you have several tones sounding together, the bigger the max-to-min fluctuation the more obvious this is to the ear (='louder" as far as the brain is concerned). This is why a 2-voice box (with detuned reeds) often sounds "louder" than a 3-reed one, with a 2-reed one the dips in amplitude are deeper as the two reeds can cancel out, when you add the third reed it tends to fill in the gaps -- since the ear is sensitive to amplitude changes this sounds "quieter", though if you measure it with an SPL meter it's actually louder (more volume).

The same thing happens when you play an interval like a third; if you look at the resulting waveform, with one reed there is a big amplitude fluctuation (beats between the fundamental and third reeds), as you add more reeds (M==>MM==>MMM) the gaps tend to get filled in -- the ear/brain then interprets this as being less "out-of-tune".

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Two-voice tuning tips
« Reply #36 on: January 12, 2009, 08:33:39 PM »

I just installed the Cagnoni "macchina" reeds in the 2-voice box for which this thread was started; the reed sets were pre-tuned a few cents apart (I did not check each of them individually) and did not touch them, they sound quite good, a bit wet, very bright and projecting sound, very different than the old Hohner H and T the box had before. The box has a flat reed block, so the treble reeds are directly under the air holes.

I kind of miss the "Hohner bass" sound though, the Cagnoni is not has deep, and doesn't have the same "grunt".

BTW I got those reeds from CGM Musical, excellent service, good price and fast shipping!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Two-voice tuning tips
« Reply #37 on: August 27, 2009, 09:48:17 PM »

In the discussion above, Bruce H mentioned that (well-known Québécois box player and singer) Normand Miron favoured the "Dedic/Viennese" tuning scheme of having one voice sharp and the other flat.

As some of you will know  ;) I currently have a box that is tuned too dry for my taste and, since I want to get it adjusted, I was thinking of asking to have it done in this way, so I've been making enquiries. Local opinion seemed divided so I thought I'd ask the man himself and phoned Mr. Miron.

Guess what - having used both this and the conventional approach, he now favours the conventional, having one voice at 440 Hz and the other as many cents sharp as you need to get the beats you want. He said the 440 Hz voice provided a stable reference and the tiny fraction that the box sounded sharp wasn't worth worrying about. Doing it the other way (for example, +4 / -4 cents) means, he now feels, that you have to do more tinkering and going back and forth to get a satisfactory result.

Maybe this is what Theo meant when he wrote on the first page of this thread:

Much the easiest way is to keep one set tuned to concert pitch and then sharpen the other set.  You should check and adjust the tuning of the concert pitch set first.  New reeds are often supplied at about 10cents sharp.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Two-voice tuning tips
« Reply #38 on: August 27, 2009, 10:07:28 PM »

In 1995 I got a box from Clement Breton (#31)

he suggested the 5 low 5 high tuning but did not call it Dedic  another name ( secret you kkow)

It sounded like caca   the box was retuned 440 ,and the 5 cents plus reeds were  left as is

Sounded much better.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Two-voice tuning tips
« Reply #39 on: August 28, 2009, 06:20:11 PM »

 A very interesting thread..... I have a question on this subject: upon tuning an instrument in the decribed method with say, two sets of medium reeds, and one set of bassoon reeds (engaged with a stop or switch), where would the best place be to position the tuning of the low reeds.....halfway between the -4 and +4 medium reeds?

 And further down this road, how could it be laid out for a one-row four stop box.... would the medium reeds be -4 & +4 and the bassoon and piccolo set remain on pitch..... ???...jwf
« Last Edit: August 28, 2009, 06:28:10 PM by j.w.forrest »
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal