Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Flat mounted reed plates -- strange?  (Read 4421 times)

0 Members and 1 Guest are viewing this topic.

OldJack

  • Good talker
  • **
  • Offline Offline
  • Posts: 76
    • Suisun Sailor
Flat mounted reed plates -- strange?
« on: April 06, 2013, 06:28:33 AM »

I just received the project one row four bass I bought through ebay. Old and in need of help. Bellows seem serviceable. Some reeds loose in the box but all are there -- clearly needs total rewaxing. Only single voice but new pads on the pallets(?) should help plus new seals on the bellows. The buttons and lever arms are in good shape and quite sturdy.

What seems unusual to me is that the reed plates are mounted flat on a board over the air holes and not on a block. The mounting technique is the same for treble and bass. Is this standard for a one voice, or for a cheap box, or …?

Another question relates to tuning. I’ve seen several references to fine tuning after the plates are mounted on the blocks. How are the inside reeds tuned?

I would really appreciate some info on this.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Flat mounted reed plates -- strange?
« Reply #1 on: April 06, 2013, 07:33:26 AM »

The Hohner 1140 1 row 4 bass has the reeds mounted flat as standard it is part of what gives them their unique sound.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Flat mounted reed plates -- strange?
« Reply #2 on: April 06, 2013, 08:49:36 AM »


Another question relates to tuning. I’ve seen several references to fine tuning after the plates are mounted on the blocks. How are the inside reeds tuned?

With ingenuity!

It is true that the reeds must be tuned in situ.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Flat mounted reed plates -- strange?
« Reply #3 on: April 06, 2013, 08:55:52 AM »


Another question relates to tuning. I’ve seen several references to fine tuning after the plates are mounted on the blocks. How are the inside reeds tuned?

With ingenuity!

It is true that the reeds must be tuned in situ.

There are two methods of lifting the inside reeds through the plates to tune them, unfortunately Theo's little photo essay appears to have disappeared  :'(

Alternatively, you can record what the tuning error is with the reed in situ, pop it out, turn it round, adjust the tuning, pop it out, turn it round, check the tuning, rinse and repeat - long winded and frustrating but so is learning either of the two reed lifting methods believe me

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Flat mounted reed plates -- strange?
« Reply #4 on: April 06, 2013, 09:26:25 AM »

Pop it out turn it round!
 Sounds like a subject for limericks to me
 Bellows to me yes. Reeds? That's for the experts.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

OldJack

  • Good talker
  • **
  • Offline Offline
  • Posts: 76
    • Suisun Sailor
Re: Flat mounted reed plates -- strange?
« Reply #5 on: April 07, 2013, 01:01:05 AM »

Nothing like learning a new skill. Hope this think plays when I'm finished -- when ever that may be.

Pop it out, turn it ‘round
Got to keep that hohner sound
Tune it fair
With bellows air l
Reed are filed, never ground.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Flat mounted reed plates -- strange?
« Reply #6 on: April 07, 2013, 04:24:34 AM »

Hi Jack,
If it's a Hohner 1040 like the one in Lester's pic. it would have two voice on the treble side which means you would have to
set up tuned - dry or wet as it would have been from factory.
I have a 1040 that needs repair and tuning but will be sending to my repairer in maine for the latter.
maybe you have a one voice but i haven't seen one of those, I know I haven't seen it all yet though.

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

OldJack

  • Good talker
  • **
  • Offline Offline
  • Posts: 76
    • Suisun Sailor
Re: Flat mounted reed plates -- strange?
« Reply #7 on: April 07, 2013, 08:02:28 AM »

Well, Boxcall, I don't know what it is. The only identifier I've been able to find is the importers name, "Bruno and Sons, New York, American Agents" and "Pitzschlers Universal". I've googled for hours and found only that the importer was in business in New York from about 1862 to 1865 -- if it is the same one. On the end (chin side) there are two metal plates. One reads "Made in Germany" and the other "Steel Reeds". It's interesting that all the straps are rotten and broken but the bellows seems fair enough. So, too, the key action. The two reed boxes are held to the bellows by long winged screws which appear very old (never seen anything remotely similar) but must be late additions because they are sufficiently large that they won't allow the brass feet on the bass end to settle evenly on a surface. One set of reeds on the treble end and one set on the bass both sets mounted flat.

I'm debating whether or not to tune and wax this myself. I paid so little for it I'm not sure it's worth the cost of professional fettling. Besides, if someone else does it I won't be learning much. It's one thing to prepare to squeeze and another to prepare the squeeze.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Flat mounted reed plates -- strange?
« Reply #8 on: April 07, 2013, 08:25:50 AM »

 ;D
Nothing like learning a new skill. Hope this think plays when I'm finished -- when ever that may be.

Pop it out, turn it ‘round
Got to keep that hohner sound
Tune it fair
With bellows air l
Reed are filed, never ground.

 (:) (:) ;D ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Flat mounted reed plates -- strange?
« Reply #9 on: April 07, 2013, 01:06:47 PM »

Hi Jack,
If it's a Hohner 1040 like the one in Lester's pic. it would have two voice on the treble side which means you would have to
set up tuned - dry or wet as it would have been from factory.
I have a 1040 that needs repair and tuning but will be sending to my repairer in maine for the latter.
maybe you have a one voice but i haven't seen one of those, I know I haven't seen it all yet though.

Hi boxcall,

You can find single-voice accordions, usually small ones and/or cheap ones, but not always.  The Castagnari Lily is a well-known 2 row box with one voice and really nice quality.  I posted some pics of a tiny 8-button single voice box in this thread:

http://forum.melodeon.net/index.php/topic,11643.0.html

PG
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Flat mounted reed plates -- strange?
« Reply #10 on: April 07, 2013, 06:26:47 PM »

A Pitzchler & Sons were a German manufacturer who mass-produced instruments for, among others, Sears & Roebuck in the early 20th Century.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Flat mounted reed plates -- strange?
« Reply #11 on: April 11, 2013, 05:08:48 PM »

Nothing like learning a new skill. Hope this think plays when I'm finished -- when ever that may be.

Pop it out, turn it ‘round
Got to keep that hohner sound
Tune it fair
With bellows air l
Reed are filed, never ground.
So I've heard the old men say
or use a jig and grind away.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Flat mounted reed plates -- strange?
« Reply #12 on: April 11, 2013, 05:12:33 PM »

A Pitzchler & Sons were a German manufacturer who mass-produced instruments for, among others, Sears & Roebuck in the early 20th Century.

I have a couple of these, they are actually really well made instruments. They use individual reeds , and often have really fancy wood work with a lot of attention to detail. Typically about 20% bigger than a Hohner.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

OldJack

  • Good talker
  • **
  • Offline Offline
  • Posts: 76
    • Suisun Sailor
Re: Flat mounted reed plates -- strange?
« Reply #13 on: April 12, 2013, 06:35:15 AM »

Quote
I have a couple of these, they are actually really well made instruments. They use individual reeds , and often have really fancy wood work with a lot of attention to detail. Typically about 20% bigger than a Hohner./quote]

That's good news. I'll pm you.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal