Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Preciosa C/F to B/C  (Read 5030 times)

0 Members and 1 Guest are viewing this topic.

alaskairishbox

  • Member
  • *
  • Offline Offline
  • Posts: 39
Preciosa C/F to B/C
« on: April 08, 2013, 05:19:37 AM »

Hello Folks,
There is a good chance I may be getting a Preciosa in C/F. I will obviously try and see how reasonable it is to play Irish tunes on the existing club system. I doubt that's a reasonable proposition, but am willing to be corrected.
OR
This could turn into a monster of a project that would go something like this:
1. Swap C reeds in to inner row position.
2. Mill down a set of regular reed plates to 14mm (so they fit the Preciosa).  I previously took these reeds from Bb to B. Btw those reed handle and feel just great in a regular sized B/C pokerwork.
 
I read an old post of Theo's where he talks about lowering pitch to make preciosa reeds rather than raising them. This if I understand correctly gives one a physically smaller reed/reed plate with a "sink under pressure" response. My guess is this ends up making reeds that take a little less air with the sinking under pressure being the "tradeoff". I'd love to know more about this if anyone has worked with this.

If I understood the above info correctly, would it make more sense for me to take a regular C row and drop the pitch to B rather than using the Bb row that I brought up to B.


Ahmm...yes I will try to wrap my head around the bass side later.

Thanks guys!
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Preciosa C/F to B/C
« Reply #1 on: April 08, 2013, 06:43:56 AM »


Ahmm...yes I will try to wrap my head around the bass side later.


The bass side is a walk in the park by comparison....

Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Preciosa C/F to B/C
« Reply #2 on: April 08, 2013, 09:55:59 AM »


 I read an old post of Theo's where he talks about lowering pitch to make preciosa reeds rather than raising them. This if I understand correctly gives one a physically smaller reed/reed plate with a "sink under pressure" response. My guess is this ends up making reeds that take a little less air with the sinking under pressure being the "tradeoff". I'd love to know more about this if anyone has worked with this.


The most important thing is to end up with reeds that are short enough to fit the very small Preciosa reed chambers. If the reed tongues are too long and foul the end of the chamber you will have no sound at all.  The pitch drop under pressure is an unwanted side effect of using short scale reeds. 

So before you go to the trouble of cutting all the B reeds down to width check that the reed tongues are short enough to vibrate freely in the Preciosa chambers.
« Last Edit: April 08, 2013, 10:19:56 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

alaskairishbox

  • Member
  • *
  • Offline Offline
  • Posts: 39
Re: Preciosa C/F to B/C
« Reply #3 on: April 08, 2013, 05:13:05 PM »

Thanks Theo,
I was hoping you would respond.
- I am wondering, exactly how much reed clearance is enough. Is this something you determine by trying how much you can get away with or is there a magic number that one would try to stay above.
- Is there a problem shortening the reed plate by cutting down the riveted side? I see this as a move that would provide more clearance at the reed tip.
- So the shorter, floppier reeds are not about reduced air requirements in the original setup at all? Are air requirements even part of what I should be thinking about?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Preciosa C/F to B/C
« Reply #4 on: April 08, 2013, 09:52:16 PM »

No magic numbers, just as long as the reed, and the valve next to can move freely. When adapting reed plates from full size instruments I have also removed metal from the rivet end.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Preciosa C/F to B/C
« Reply #5 on: April 14, 2013, 09:55:03 AM »

Hi Alaskairishbox,

I meant to reply to this thread earlier but never found the time. I've made two B/C and two C#/D Liliputs over the last couple of years - and two G/C Preciosas ... Liliputs have the same size reeds as Preciosas. So a B/C Preciosa is clearly 'do-able'. Both B/C instruments turned out very well ... one, set up as B/C/C#, is played by Owen Woods (Ukebert), which he calls his 'Impiliput' - a Red Liliput with insides from an Imperial 1 Piano Acc inserted into the bass end, to give 12 basses. The other B/C was a straight Irish instrument which went to a customer in Japan.

Theo's comments on shortening/trimming reeds I fully endorse, but I tried to minimise the use of non-Preciosa/Liliput reeds and adapt Preciosa/Liliput reeds whenever possible.

I worked by using the C row of a C/F instrument, then took the Bb from a Bb/Eb and brought this up a semi-tone. But I also have a good stock of accidentals from both C/F and Bb/Eb Preciosas/Liliputs, which I can insert into the sequence to get the best match with the B-row. Dropping the C-row to B as you suggest, by using solder, would work well, I am sure. But it leaves you needing to create ANOTHER C-row, via the process of 'cutting down'/reducing non-Preciosa reeds in the way you/Theo describe... particularly a shame since the C row is the dominant row in a B/C box.

Also, I didn't simply tune the entire Bb row up a semitone for the B-row... At the lower end/low-mid of the B-scale, the Bb reeds have enough metal/substance on them to accept tuning up a semi-tone. In the mid-range and higher - that is where odd accidentals/soldering-down a semitone/best-fit came into play...

But whichever approach you take, you are likely to need to do some fairly careful chamber-work on the reed-pans... this was particularly the case with the G/C Preciosa.

In making the two B/Cs, I actually worked on instruments in pairs, each time creating a B/C Liliput and a C#/D Liliput starting from 2 instruments originally in C/F and Bb/Eb. This gave me much of what I wanted... plus I have my stock-pile of 'spares'!

One final point, getting Preciosas and Liliputs into B/C and C#/D produces a great result tonally - the instruments are rich and responsive, with less of the brashness one can get with these small instruments with higher F and G rows.

The basses involves the same complex shifting and tuning for 'best fit'... and again working from a C/F and Bb/Eb instrument with spares to hand was a good way to go....

Best of luck with the project... It is well worth the effort!

Mike R
Logged

alaskairishbox

  • Member
  • *
  • Offline Offline
  • Posts: 39
Re: Preciosa C/F to B/C
« Reply #6 on: April 17, 2013, 05:15:43 AM »

Thank you Mike,
I will revisit your post when I start working on this. You have given me some great concepts to think through. Lots of this makes a whole lot of sense. Two questions come to mind right a way.

Since you prefer to use liliput/preciosa reeds. Does that mean that they are actually different other than reed plate size.

Also, what do you mean by reed pan work? Do you find you have to alter the chamber size to get the reeds to behave properly?

Thanks,

Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Preciosa C/F to B/C
« Reply #7 on: April 17, 2013, 08:00:05 AM »

Hi Michael,

Yes, Liliputs and Preciosas have the same narrower, shortscale reeds, which is very useful. The reeds in these little boxes are also pretty consistently of a very good quality - zinc reedplates, very hard steel tongues, fine tolerances and lightening quick to respond.

The Hohner Imperial 1 mini-Piano accordian and the Hohner Regina mini P.Acc also have this size of reed - another potential source for odd notes and accidentals. But you have to be careful with these P. Acc reeds - although they look the same, they often have a different profile and are not quite so robust in tone...by profile I mean that the thickness and taper of the reed tongue on these P.Acc reeds is different from reeds from a diatonic box. A Liliput was sent to me by a customer which had a really 'soggy' tone and response .... on closer examination, it seems a good number of the original reeds had been replaced with reeds from an Imperial P.Acc and tuned up/down to be diatonic.... as I say - 'soggy'!

And again, Yes, you need to make sure the chamber size matches the reed-plate size. Key conversions generally involve a bit of adjustment to the chambers - enlarging or reducing -to get a consistent tone and good response throughout.

cheers! .... And thanks for your emails- I'll get to you on that later!

Mike
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Preciosa C/F to B/C
« Reply #8 on: April 17, 2013, 08:02:34 AM »

Does that mean that they are actually different other than reed plate size.

Also, what do you mean by reed pan work? Do you find you have to alter the chamber size to get the reeds to behave properly?


The reeds in Preciosa and Lilliput are the same as each other as far as I can tell.   The plates are narrower, but the reeds tongues are also shorter for any given note (and even standard Hohner reeds are shorter than typical Italian reeds).   As a result the reeds are much thinner than in standard sized models, so require much more care to change pitch, and are easily ruined by too much filing.  If you have not done this sort of thing I strongly recommend you do a standard sized conversion first to get some experience, or you may end up with a disappointing result). The short scale length of the reed also means that the reed pitch drops noticeably when you drive them hard.

I always wonder when I hear of semitone conversions on these little Hohners.   Semitone players tend to require very specific types of keyboards to be able to get the fast, crisp playing and ornamentation of Irish music.   Though these are remarkably good boxes in many ways their weak point is the keyboard design, which is not particularly fast, even when well set up.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Preciosa C/F to B/C
« Reply #9 on: April 17, 2013, 08:58:10 AM »

Hi Theo and Michael,


I always wonder when I hear of semitone conversions on these little Hohners.   Semitone players tend to require very specific types of keyboards to be able to get the fast, crisp playing and ornamentation of Irish music.   Though these are remarkably good boxes in many ways their weak point is the keyboard design, which is not particularly fast, even when well set up.

Theo makes a good point here - and its one that has been made before as a cautionary concern. I find it difficult to comment as I'm not a good semitone box-player. I can knock out a tune on C#D with a bit of cross-rowing, but not to the point where I am testing the keyboard limitations. I wonder if Steve Jones can comment - he has a C#/D Liliput...

If I understand Theo's point, it is that the keyboard might not be so good at the pulls/runs and cross-rowing of semitone box playing. Am I right in wondering that this might be even more the case with B/C than C#/D? Of course, we could also ask Owen, who has a B/C Liliput, and is certainly someone who would be exploring keyboard limitations!!!

The other more direct approach is - Alaskairishbox actually has a Preciosa in playing condition... So (although it wouldn't produce the intended music!) would it not be possible to play some of the B/C button/finger patterns and assess how the instrument is responding??? .... ie Just play it like a B/C and see how it feels?

cheers

Mike R
« Last Edit: April 17, 2013, 09:04:31 AM by Microbot »
Logged

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Preciosa C/F to B/C
« Reply #10 on: April 17, 2013, 11:47:06 AM »

I can offer no advice, but should you decide not to do it, I'd happily take that huge, lumbering weight of the Preccy off your shoulder.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

alaskairishbox

  • Member
  • *
  • Offline Offline
  • Posts: 39
Re: Preciosa C/F to B/C
« Reply #11 on: April 17, 2013, 07:46:49 PM »

Again,
Lots of good points brought up here.

Ok, I was wondering about the reed tongues on the Preciosa/Liliput and now I have my answer. Smaller reed plates, shorter tongues, possibly different shaped tongues. So that pretty much tells me I probably will have a whole bunch of issues trying to get my existing B row (used to be Bb) in there.

Taking a full sized C row down to B may not be the ticket either. Although at least in theory the weaker tongues could presumably have properties much like the original thinner Preciosa/Liliput reeds. Although I would anticipate the originals to be thinner overall rather than just weaker at the bottom. Could be I am over or underthinking this.

Theo, Yes I have converted a full size. That went off without a hitch, I actually think the row I changed is a whole lot more responsive without having given up anything else, such as stability under pressure etc. Having done one hardly makes me qualified, but rather gives me enough confidence to really mess up the next project.

I don't actually have this box in my hands yet and I will give it a good workout as a C/F to see if there are keyboard limitations. I'd love to hear from folks that have played a Preciosa/liliput that has been violated into a B/C box. I did talk to one fellow who claims to have played Irish tunes for years on a Liliput in C/F. I can't imagine he could have been very fast or proficient, playing on the outer row and getting the accidentals all the way from the half row on the inside. But as he was a nice old fellow helping me out I didn't pursue that line of questioning very much.

Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Preciosa C/F to B/C
« Reply #12 on: April 17, 2013, 08:57:42 PM »

I wonder if Steve Jones can comment - he has a C#/D Liliput...

Well as you all know I am permanently primed to run off at the mouth (or rather keyboard) at the slightest provocation. So yes. :-)

When I saw the Rowbothamed Liliput in question up for sale, I asked for advice from an experienced member who told me that the Liliput keyboard was awkward and prevented him from doing certain things he liked to do, and so he couldn't recommend it. But I bought it anyway.

It is indeed a bit awkward but strangely enough I soon found it very easy to play ridiculously fast on the thing.

When you slide the buttons feel a bit like the gearshift on an Austin 1100 (do I remember one motoring journalist describing that experience as "stirring cobblestones in porridge"?) but it's just doable.

Perhaps the light weight, compact size and easy bellows action compensates for the deficiencies of the keyboard because, as I said, the box seems to lend itself to playing tunes at an insane clip.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Preciosa C/F to B/C
« Reply #13 on: April 17, 2013, 09:50:06 PM »


Taking a full sized C row down to B may not be the ticket either. Although at least in theory the weaker tongues could presumably have properties much like the original thinner Preciosa/Liliput reeds. Although I would anticipate the originals to be thinner overall rather than just weaker at the bottom. Could be I am over or underthinking this.

Yes thinner overall.
Quote

Theo, Yes I have converted a full size. That went off without a hitch, I actually think the row I changed is a whole lot more responsive without having given up anything else, such as stability under pressure etc. Having done one hardly makes me qualified, but rather gives me enough confidence to really mess up the next project.

I find that it is just thinning the middle of the reed that makes it less stable.

Incidentally there is a very rare two row Preciosa which might be good for a BC project, unless you actually prefer to have the additional 4 buttons of course.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

alaskairishbox

  • Member
  • *
  • Offline Offline
  • Posts: 39
Re: Preciosa C/F to B/C
« Reply #14 on: July 12, 2013, 12:00:51 AM »

Hello Folks,
The B/C Preciosa project is close to done now and I thought an update to the forum would be appropriate:

First, let me thank Theo and all the folks that contributed with advice information and encouragement. Let me especially thank Mike (Microbot) for his firsthand insights on and off the forum.

The box I got turned out to be a Bb/Eb not C/F as I was told. That of course changed things.

Treble
I pitched the Bb row up a half step without any real issues.  The F to C move of course was a bit crazy. Many of the reeds were only a half step off, given that I was changing their position on the reed blocks. However quite a few reeds would have been too far out to re-pitch and not get weirdness. I ended up using spare reeds from an old "A block" that were only a half step off. I used a vise and a file to bring the reed plates down to 14mm width to make them fit the Preciosa reed pans. Some I shortened to bare minimum lengths. Others required some wood work as well

The main complications were in the lower notes that need to be very short to fit into the reed pans, yet sound quite low. The compromise here was to do a little woodwork to maximize the space available and work with relatively floppy reed tongues. It took some trial and error to find a pitch/size/stiffness combination that would speak and be stable under pressure. I eventually succeeded except for the very lowest note on the C row, which really should speak a little quicker. I am still working on that one

Bass
When I opened up the bass I found an unexpected set of reeds, giving the bass chords four octaves. Essentially there is an additional set of reeds that sound with the bass note button as well as the chord button.

I changed the bass end to:
e/a d/d
E/A D/D
f/c g/g
F/C G/G

I lost the high squeaky 4th octave in the process, because those are some pretty special reeds I couldn't easily duplicate in the pitches needed. They are full size bass reed plates with tiny little treble reeds on them. I am still thinking about a good way to duplicate those reeds and maybe retro fit those.

Waxing and valve complications:
Yikes! Due to the reed pan setup, the reeds have practically no gaps between them, so they can't be waxed by pouring as you would on a regular reed block. The procedure involves waxing the top edge of the chamber for a single reed and instantly pressing the reed in the correct position. Before any of this mess cools much, you wax the edges of the next reed and press that down etc. This process creates the air seal. Then you go along the top and bottom with wax again to keep the reed stuck there for posterity. Simple..........yeah but.

I found that since the tolerances are ridiculously tight in there, I found that sometimes the valves would contact the wax and many of the reed plates had to come out several times to get it right. The valves on this thing are actually narrower than regular reed valves. Since nobody seems to sell valves that narrow, those had to be modified as well.

 

Tuning:
What a mess that was. Tuning one of these is a "lock the door and pretend you don't have a family, life or a job" sort of proposition. The top reed pan can be taken off and the bottom of the reeds can sort of be accessed from the bottom to support the reed while tuning. This is not as straight forward as on a regular reed block, but still possible with a special tool.

The bottom reed pan is integral with the front of the melodeon, so there is no way to access the reeds from the bottom to support the bottom reeds when tuning them. My experience with the "Aushebe Plättchen" (the little piece of metal to flip the lower reed up), has been very poor. Besides there is no room to use one of those in the lower reed pan. I have trouble using the traditional “U” shaped hook as well. So I made up a fancy curly hook that curls under the top reed to then lift the lower reed while approaching the reed from the center of the instrument where there is room.
After using this curly hook for a while I started wondering if I could work on the lower reeds unsupported if I tuned with a dremel tool instead of files. I hate using dremel tool on stuff like this because I don't have a "feel for it" like I do with a file.

Wow!! what a difference. I have concluded that that is definitely the way to tune bottom reeds of a Preciosa. It requires a diamond bit (read very sharp) because you can't really put any pressure on the reed and you have to keep the speeds very low to keep the heat on the cutting surface to a minimum.

Fine tuning:
I first tuned the box dry, since wet often reminds me of clowns and horrible circus music. I found the box had lost the sparkle so I then re-tuned it with reeds about 8 cents apart and the sparkle came right back. An interesting side note is that the lower reed pan reeds are actually a bit dominant. They are louder than the upper reed pan reeds and tend to have more "say" about the pitch of the two reeds played together.

What is left do to? After playing a week or so I will go in and touch up some of the tuning. I will resurface the pallets because they have dirt on them that confirms they have been leaking for years. I need to re-tape a few spots on the bellows.
I also need to figure out what if anything to do about the three helper/accidental buttons. The are not reeded, although there must be something useful I can do with them.

Conclusions:
I can see that this will be my favorite Box. It has a huge dynamic range. You can play it substantially louder than a pokerwork, or delicately, significantly increasing the "spouse approval rating". Playing Irish in other words sliding does seem trickier than a regular box, but doable. Due to the low volume of the bellows I find I use the air button much more and I am still struggling with the air volume when playing the basses. I guess that’s ok since I’ve only been playing it for a day now.

Material source request:
I bought gold bellows tape from the button box assuming that my bellows had faded gold tape. I now realize the original color is actually gold/green, to go with the green celluloid on the box.
Does anybody have a source for this stuff?

Henry
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Preciosa C/F to B/C
« Reply #15 on: July 12, 2013, 01:46:09 PM »

Hi Alaskairishbox

What a coincidence! I have just completed a Preciosa in B/C/C# for Michael Driscoll in Scotland.

Well done to you on seeing your project through; it’s clear from your post that you met and overcame lots of dilemmas/problems! I had less problem with sourcing reeds, having a healthy reedstock from other similar instruments .... which comes from making up so many of these boxes in different keys!

Yes, these Preciosas have volume, speed of response and great dynamic range ... a great frustration for me is that, having set this instrument up, I couldn’t put it through its paces properly... I am NOT a competent B/C player and my recording of it below demonstrates this!!!

There is a photo below and it can be heard at my soundcloud page ...

https://soundcloud.com/microbot-2
 
The instrument is now with Michael, who received it today. The box has a McComiskey bass set-up and, as yours, a relatively low level of musette – about 8 cents – just enough to produce a bright swing.

The accidental row is a ‘short’ C# row with the notes F/F#; G#/A#; C#/C; F/F# ... Taking advice from others, Michael decided an extra high F#(draw) would be more use than the D#(draw) on 4th button accidental, which would normally be on that button on a C# row. Otherwise, the above note selection was dictated by the relative position of the helper row to the C row.

Yes, the reeds on the upper reedpan of a Preciosa have significantly less volume than the lower reed set, which are waxed directly above the soundboard. And yes, getting those high reeds for the bass chords is a problem... but they are part of the characteristic tone of Preciosas. One solution is to find a standard treble-end reed with the correct pitch on press/draw (in itself a problem!) then reduce the reedblock chamber size to fit what will be a much shorter reed.

Your description of waxing in the treble end made me chuckle and is bang-on! All I can say is, after setting up many, many Preciosas, it is still a rarity if I don’t have to replace one or two valves after final waxing and sealing. But getting that wax-seal is vital to a good responsive instrument, especially with such small bellows. ... And yes – modify the valves where necessary.

Good luck with hunting for bellows tape of the correct colour/texture ... and tell me if you find any!

Again – very well done! (And chance of a recording?)

Mike R
Logged

sine labore

  • Good talker
  • **
  • Offline Offline
  • Posts: 69
Re: Preciosa C/F to B/C
« Reply #16 on: July 12, 2013, 07:22:49 PM »

Well then!
Logged

MandoC

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 266
    • Swing Dogs Contra Dance Band
Re: Preciosa C/F to B/C
« Reply #17 on: July 13, 2013, 05:35:04 PM »

Henry:  You bring new meaning to the phrase "learning an instrument inside out". I don't even like to take the grille off my boxes and you are rearranging the insides of them.  Somehow, this does not surprise me at all. Keep it up.  All the best  Charlie
Logged
Charlie Hunt
Mandolins and now, B/C Button Accordion)

Swing Dogs Contra Dance Band, Facebook Page:https://www.facebook.com/SwingDogs

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Preciosa C/F to B/C
« Reply #18 on: July 13, 2013, 05:46:18 PM »


The valves on this thing are actually narrower than regular reed valves. Since nobody seems to sell valves that narrow, those had to be modified as well.


... And yes – modify the valves where necessary.

Interesting, I wonder what valves you have both been using?   I just use the smaller two or three sizes of Italian vinyl valves and have not found a need to trim the width.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal