Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner HA-114 basic repair, refurbishment, upgrade?  (Read 14956 times)

0 Members and 1 Guest are viewing this topic.

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Hohner HA-114 basic repair, refurbishment, upgrade?
« on: April 10, 2013, 08:13:58 PM »

For the first time in a few years I'm back in possession of some Hohner 1-rows, technically an HA-112D and an HA-113A. The A I've already posted about in Buy/Sell, it's in rough but playable shape and I'm optimistic for its potential, and barring a good trade I'm fixing to just hang onto it and play it. The D I bought recently off a local Irish player, and it's in generally good shape but needs a few tweaks. For some of the questions I've had, I've found some good generic accordion and melodeon advice using Google, but couldn't find much specifically addressing Hohner HA-114 issues. I thought it'd be of use to others (and definitely to me) for me to try and get my head straight on what these 'boxes need, centralized to one thread. For those things which are just generic accordion maintenance, if you  let me know which are those I can dig up past threads and link them here so future searchers can find them easily.

Here are a few of my basic questions:

  • I see CGM Musical is the recommended dealer for Hohner parts in the UK; does the board have a preferred US dealer to get bellows/hand/thumb-straps and other such OEM accoutrements?
  • On both instruments, the circular pads on my spoons are worn (or fallen off entirely). I didn't see any pre-cut circles at CGM, and the circles appear to be leather rather than the pallet felt CGM sells. What kind of leather should I find and cut to replace the spoon pads? Would it be the same material as I use to re-pad the pallets on my 10 treble keys, or should those be actual accordion felt?
  • The A has some internal rust, though not terrible. The springs in the keyboard look a bit dull, but not rough or red, and seem to move and return just fine. Is there utility to putting a tiny dab of lubricant (not graphite?) onto the contact points of the springs to reduce friction?
  • Both accordions are missing the thumb-strap, but have the two rivets that once held it in place. Is there any way to remove the rivets other than drilling/prying them out? Is there any low-hassle (as in not drilling holes in a metal plate and epoxying it on) way to install the new thumbstrap with a thumbscrew so I can take it on and off later?
  • The chromed spoons and corners of the A are corroded from poor storage. New spoons are only 10 pounds each, but for now I'd rather just use the current since they're functional. Is there any product, like paste-wax or whatnot, I can use to preserve/protect the current patina/corrosion so it doesn't rust further?
  • The stops, I presume, are attached to some kind of long sliding plate (wood or metal?) with holes in it which come in and out of alignment with the holes as the stop is pulled, yes? My stops are very, very balky on the old A, either due to corrosion (if metal) or swelling over time (if wood). Any non-invasive way to make them smoother, or would I have to remove the reedblocks and polish the slides or something?

Thanks much for any suggestions on the above, or links or keywords so I can find previous threads they're covered in which my google-fu has not yet found me. I'm learning a ton by reading all the current threads on the board, and hope to be contributing to Tune of the Month soon.
Logged

Hallelujahal

  • Guest
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #1 on: April 10, 2013, 08:26:56 PM »

A few comments as I've just refurbished a 1 row four stop (HA114) for a friend.
Quote
The stops, I presume, are attached to some kind of long sliding plate (wood or metal?) with holes in it which come in and out of alignment with the holes as the stop is pulled, yes? My stops are very, very balky on the old A, either due to corrosion (if metal) or swelling over time (if wood). Any non-invasive way to make them smoother, or would I have to remove the reedblocks and polish the slides or something?
The stops are attached to a small square wooden block which is then attached to a metal slide which is inside the reedblock. Now you may have trouble taking the reedblocks off as on my box they are attached directly to the sound board (glued). So don't even bother. A small bit of silicon spray may very well do the job of freeing up any dodgy slides. The stops unscrew and can have any residual rust removed.

Secondly, most folk in your position usually find that they get such a good deal from Charlie Marshall (CGM) that's it pays to get him to ship over the pond. I ordered a new melodeon stop, new set of bellows pins and 14 metres of gold bellows tape and including postage it came to just over £16 - that's $24 to you and me...as they say 'go figure'.

Thirdly, I'd say get new spoons...I wish I had, for the sake of a few quid, they make all the difference. Chances are that the handle of the spoon is just aching to break off any day now.

Them's my thoughts.
regards, AL
Logged

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #2 on: April 12, 2013, 04:09:59 PM »

Thanks for noting the utility of CGM even for us Yanks. I'm fixing to place an order with them for bellows-straps, spoons, and bellows-tape.

Noob question, but with the bellows-tape do I peel off a current section of damaged tape and replace it entirely with fresh tape, or do I use the fresh bellows-tape to patch over worn spots in the existing tape?

Interesting idea with the silicon (silicone?) spray; where is it you apply the product? Do you shut the stops and spray in from the holes above the treble keyboard, or do you somehow spray it on the wood-block at the top of the stop-slide and let it trickle down? Just trying to figure out how to lube up that metal slide without splattering the reeds or soaking the surrounding wood.

So far as spoons, I suppose you're right; "for want of a nail" and all. Better to spend a few bucks for a fresh one rather than to snap a spoon and have the box down for weeks.


One other small point: I've been freshening up the bellows with dryer sheets and all, but want to check them out more thoroughly which requires detaching the bellows from both sides. It was a real bear pulling the bellows pins from the treble end, but on the bass end the bellows pins seem frozen in place. Again either corrosion or swelling of the wood over time, both due to poor storage. Any advice on forcing those bellows pins out without marring the paint too much? At first I was worried about scratching the pins themselves, but looking at CGM they're really cheap to replace, so I'm fine damaging the pins getting them out so long as the box is fine. What's the smart technique for a bellows pin that just doesn't want to budge?
Logged

Ray

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #3 on: April 12, 2013, 04:55:59 PM »

Noob question, but with the bellows-tape do I peel off a current section of damaged tape and replace it entirely with fresh tape, or do I use the fresh bellows-tape to patch over worn spots in the existing tape?

Unless it is absolutely vital to replace it, I'd leave it on, I'm in the same boat as you and decided it would be a great idea to remove all the bellows tape and redo it, it was an awful mistake  ::)

Also, on the spoon pad note, I'm going to use the pallet felt that CGM uses I don't see why it shouldn't work, but I'll let you know how I get on! Here are some threads/links you might find helpful (if you haven't seen them already):

One Row Refurb:
https://picasaweb.google.com/lester.bailey/ZZ_Melodeon1140Refurbishment#

Bellows Tape Removal:
http://forum.melodeon.net/index.php/topic,9188.msg114239.html#msg114239

Bellows Taping:
https://picasaweb.google.com/lester.bailey/BellowsTaping#
« Last Edit: April 12, 2013, 04:58:48 PM by YoungRay »
Logged

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #4 on: April 12, 2013, 06:14:31 PM »

There are "purists" on these boards who insist that the right thing to do is remove the old bellows tape entirely before applying new tape. However, in my own experience, depending on what tape is on there to start with, taping over one layer of old tape seems an entirely reasonable idea. The old buckram-type tape is fairly thin, so putting another layer of buckram over it doesn't create any problems at all (IMO). All my vintage boxes seem to have had "patches" applied to the areas of wear in this way at some point & it is barely noticeable where it has been done. The crappy modern Hohner paper tape is also very thin, so taping over it seems to work fine. However, in either case, I don't think I would apply more than one extra layer before removing what's underneath.  Higher quality fabric tape may be different case however - I haven't had to replace any of that so far.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #5 on: April 12, 2013, 07:46:52 PM »

Don't tape over the old tape, you will almost certainly regret it. The old tape is failing so sticking new tape to it is a bad thing. You will also thicken the taping possibly making it impossible to do up the bellows straps. So don't tape over old tape. YMMV

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #6 on: April 12, 2013, 10:05:40 PM »

Deal ends how much you are doing.  Small patches need to overlap, but its neater to replace whole lengths.  If you go over old tape it is so subtle to pull off any old tape that is not firmly stuck down.

But if you still have not succeeded in removing the bellows pins and assessing the state if the reeds valves and wax there is little point in bothering with external finish.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #7 on: April 12, 2013, 10:32:24 PM »

Hohnershop.com has a few parts and they also have a list of customizers who also stock. 
Most of the US (decent) shops will sell you parts, if they have them and have enough for themselves.
Especially if they know you are a "hobbyist" rather than a (competitor) shop yourself.  When you screw it up they will be happy to fix it right. (talking from experience here  :-X)
CGM is remarkably do-able for this side of the pond especially if the stuffs you need are small and/or light.
Plus, the green back is looking good all of a sudden so the exchange rate isn't a killer.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #8 on: April 13, 2013, 06:31:11 AM »

Quote
Don't tape over the old tape, you will almost certainly regret it. The old tape is failing so sticking new tape to it is a bad thing. You will also thicken the taping possibly making it impossible to do up the bellows straps. So don't tape over old tape.

You've certainly had a lot more experience taping than me, Lester, but what I've experienced is this:

On really old boxes the glue on the tape is sometimes so dry, it comes off extremely easily. If the tape is really disintegrating you have to remove it.

I've had a couple of vintage boxes with old buckram tape, where the tape was doubled up on the areas which are prone to wearing, covering only half way along the underside of the bellows. It had so little apparent effect that I didn't even notice that it WAS doubled up, until I had been playing the box for a couple of months. When the tape eventually started to wear through, I took the top layer of tape off - it came away from the underlying layer quite easily - put a new layer on (again only on the half that gets worn), on top of the original layer & ... it's all good. I'm not sure what would be gained by stripping all the tape off? Putting the "patches" on effectively re-faces the bellows in the areas that are subject to friction & the patched area is only distinguishable from the rest of the bellows if you look really carefully.

This is different from dealing with bellows that have seriously decaying tape however & I can see that doubling the tape over the whole box would not be a good idea & result in the bellows being significantly wider.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #9 on: April 13, 2013, 10:17:38 PM »

Lots of good info, this is really helping.

I finally managed to get the bellows-pins on the bass end out with a small angled pliers used as a lever to get them going, and then grabbed with vice-grips and rotated back and forth to come out. The odd thing was that though the bellows pins were terribly corroded on the outside, they were pretty clean inside, but even the clean bits had huge friction pulling out.

I found a similar thing with the slide-stops: I thought the whole metal sliding plates maybe were rusted, but looking inside they're totally clean (aluminum?) On a hunch I unscrewed the shaft and knob... with those the block and plate moved smoothly under just finger pressure. So it's not the slide/block that are hanging up, it's the metal rod. And as with the bellows-pins, the rods don't really have that much corrosion.

At this point, given the terrible tightness of the bellows pins, the terrible tightness of the stop rods, and similarly the very, very tight fit between bellows and ends, is it a possibility that the moisture which rusted the external parts (and a bit on the reeds but they're functional) swelled up the wood, causing tightness everywhere?

Here are the reeds:


If that is the case, anything special I should do as I put in the new bellows pins so as to have them in their firm but not impossible to remove? And what should I do about the stop rods that are just too tight in their holes? I'm tempted to ream out the holes just ever so slightly, but what if I do that and the box contracts later? For whatever it's worth, it came from Vermont (cold and dry) to DC (not too cold, and somewhat humid), so not sure to what degree to factor that in.

Going in a day or so to order all the fresh parts. I also saw a suggestion in another MelNet thread thread for the keys. It suggested not spraying any lube in there, but instead removing the key assemblies and lightly rubbing them down with a rag sprayed with WD40. So I might give that a shot. And while I have the keyboard off anyway, I see there's another current MelNet thread about how to put wood or cardboard strip in the keyboard to limit travel.

So the corroded spoons I'm just replacing, but for the metal corners with corrosion on them, should I just scour the corrosion off with metal polish, or is it just a layer of nickel/chrome that's flake off and leave me no better?

Both are missing their thumbstraps, so I need to address that. Is the consensus just to crunch the thumb rivets out with pliers, or drill them out? For non-Cajun players is there any real utility to the thumbstrap, or am I really best just to learn to use a shoulder-strap instead? I momentarily thought a thumbstrap was appealing in being a bit more minimalist, but I suppose one strap over the shoulder adds little bulk, and probably makes it easier to play standing.


My HA-112D is pretty much fine except for the falling-apart thumbstrap, and this HA-113A is looking to be decent with the new parts. I  made this clip of it, and though it's awkward to hold without straps and the spoons aren't sealing right (so poor compression) the basic condition of the reeds sounds promising: http://www.youtube.com/watch?v=uBeJeIVpUfg&feature=youtu.be
« Last Edit: April 13, 2013, 10:19:12 PM by MatthewVanitas »
Logged

Hallelujahal

  • Guest
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #10 on: April 14, 2013, 03:28:53 PM »

You won't have any problems with putting New bellows pins back in. The best way to get old rusted pins out is to put a hot soldering iron on the pin head for about 30 seconds. They'll pull out quite easily then.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #11 on: April 16, 2013, 06:39:16 PM »

I usually scrape off the loose rust on the pins (most old ones I see are rusted to some degree) and rub a little wax on them before putting them back in. This slows down further rusting. If you warm the pins so the wax melts into the pores on the old pin that the rust left, so much the better.
 The reeds you show don't look too bad, check that the blue on the valves is still good, you may want to re-glue them. Scrape the old glue off the plates before you do though, you want them to lie flat.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #12 on: April 17, 2013, 03:33:42 AM »

I'm working up an order with CGM, and they've been very helpful in making sure I get the right items. For example, their default "Hohner strap bracket" I asked about, and they replied back that it's a bit large for the HA series and suggested the smaller generic D-ring brackets instead. I'm still a little torn as to whether to go with thumbstrap or a single shoulder-strap for these (or do one thumb and one shoulder), but buying a spare thumb and brackets is only a few pounds.

I'm ordering new bellows pins for a few bob too, just to be on the safe side and because all the heads of mine are dinged-up. But as noted they're not really much rusty at all, despite being extremely tight in the wood. I might try a very light application of wax on the new pins to see if that helps prevent seizing.

The part I'm still mystified about though is the stops. As noted I eliminated all variables except the steel rods themselves, which are extremely tight sliding through their holes. I may try as Kimric suggests and (despite little/no visible corrosion) try polishing them a bit and waxing them lightly to see if they move better. Most HAs out there have trouble keeping their stops from falling shut, but mine just don't want to slide for love or money.

Got a little Lysol aerosol to gently mist onto the insides of the bellows without adding dampness. They smell a world better already after just the dryer sheets, and to be extra safe in the end I'll try putting a little clipping of a car air freshener paper "tree" taped lightly on the wood in each end just to get more decent scent through it.


Just a few cosmetics questions: is there any product to clean the gunk off the outside without damaging the wood/paint? Maybe a very lightly damp rag with some Murphy's Wood Oil Soap or similar? And still not sure what to do to polish some of the corrosion of the metal corners of the wooden ends. But overall feeling pretty good about this whole process. It's a good feeling to be bringing this back to life again.
Logged

gm0lze

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 101
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #13 on: April 17, 2013, 07:04:26 AM »

Fixing an old Hohner for a friend.
The solder tip on bellow pins helped a lot.Would not have got the pins out otherwise.
The final problem i have now is one of the long screws holding the keyboard on has sheared due lots of rust leaving half the screw in the keyboard.
CGM gives excellent service.Got my order in three days.
New grill,bellow pins,grill pins,bass buttons,thumb strap etc.
Not sure if i should oil the metals or leave alone.
Dolan
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #14 on: April 17, 2013, 07:52:38 AM »

And still not sure what to do to polish some of the corrosion of the metal corners of the wooden ends.


The corners can be replaced.  The originals were nickel plated steel, so if there is more than a very slight film of rust then most of the plating will have gone.  The replacements available from Hohner now are stainless steel.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #15 on: April 18, 2013, 05:28:04 PM »

The corners can be replaced.  The originals were nickel plated steel, so if there is more than a very slight film of rust then most of the plating will have gone.  The replacements available from Hohner now are stainless steel.

Ah, figured as much.

Quote from: gm0lze
Not sure if i should oil the metals or leave alone.

For what it's worth, I buffed the crusty bits of the metal corners with crocus cloth just so they wouldn't be jaggedy, and lightly rubbed some white lithium grease (not sure the UK term) into them. So hoping that will keep the patina stable for now.

I also used the crocus cloth to buff off the metal rods for the stops. Between that and working them back and forth a few times, they're moving decently now, but with enough friction so they stay up. On my HA-112 I have the opposite problem, they don't want to stay up. Dangit, missed opportunity: I should've just switched rods between boxes. ;)

Just need to finalize my CGM order (and it turns out the new spoons have the pad pre-installed), and I should have the HA-113A back together and running smooth.


Still open to any suggestions as to how to clean off the grime from the wood without damaging the paint. I suppose it's not a life or death issue, but it'd be nice to have it clean-ish.
Logged

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #16 on: April 29, 2013, 08:23:22 PM »

Removing/installing the key-lever-pallet assembly
Just about finished up refining my order with CGM; the guy there has been a saint about clarifying which parts to order for which models, etc. I also thought to buy a few 75p treble coil springs, just to avoid undue delay if I blow one or two out in the future.

Speaking of the treble springs, I learned a bit the hard way. I have the grille and the keyboard off, so just the box side with the key-lever-pallet assembly bolted on. I undid the screws and... *kapang* the key assembly jumps off like a mousetrap closing. Turns out, very logically, that it's under tension because the pallets have to be tightly sealed against their holes.

What's the best way to take that tension off when I re-install the key-lever-pallet assembly? Can I wedge a pencil or something between the baseplate and the levers so the pallets are "open" and not pressing against the body? Or is there a smarter way?


Removing rivets
The other thing I learned the hard way: when removing the rivets, break off the mushroom on the inside of the keyboard and push outward. I used snippers and vice-grips to break the head off on the outside (trying not to scratch the paint, though it's scuffed enough anyway). I cut off the head, cramped down the shaft, but no matter what I did I just couldn't tap it through to the inside. I must've spent easily 20m, had droplets of sweat falling onto the table. Finally I just did the same process to the rivet-head on the inside and it slid right out. Did the same to the second rivet from the inside and took me all of 45 seconds. Lesson learned.

Installing shoulder strap
Looking forward to finally getting a shoulder-strap for these: I've been playing my D with no strap at all on the right, just keeping pressure with my right hand. It works surprisingly well, but probably not good enough for faster music. Does anyone have a good photo showing the best place to mount the D-ring bracket for a single shoulder strap for the right?

Fabric for bass hand strap

I see descriptions, and catalog parts, for a leather strap for the left hand, but both my HAs have a very light (cotton-synthetic blend?) broad strip of black fabric on the left, adjustable-ish by unscrewing the plate that bolts it on and pulling it a bit tighter before re-fastening. I actually think I like that more than leather, seems like it wouldn't get hot and sweaty against the hand in a crowded pub session. Any advice on where to find fresh strips of this material?
Logged

Ray

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #17 on: April 29, 2013, 09:15:26 PM »

Removing/installing the key-lever-pallet assembly
What's the best way to take that tension off when I re-install the key-lever-pallet assembly? Can I wedge a pencil or something between the baseplate and the levers so the pallets are "open" and not pressing against the body? Or is there a smarter way?

If I'm reading this right, what you need to do is unhook the springs for each of the levers, just flick them off from the button end of the pallet lever, then the pallet levers move freely. When you attach the whole thing, screw the base plate back onto the treble end and then put the springs back into place
Logged

MatthewVanitas

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
  • Hohner HA-113A - HA-112D - D Chanson re-reed
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #18 on: April 29, 2013, 10:50:04 PM »

[Removing/installing the key-lever-pallet assembly]

If I'm reading this right, what you need to do is unhook the springs for each of the levers, just flick them off from the button end of the pallet lever, then the pallet levers move freely. When you attach the whole thing, screw the base plate back onto the treble end and then put the springs back into place

That seems reasonable. While I'm at it, should I just spend the 75p for each key to put in a fresh spring? Is there any utility to having a properly "broken in" spring or is a new one just generally going to be better?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #19 on: April 30, 2013, 07:58:47 AM »

[Removing/installing the key-lever-pallet assembly]

If I'm reading this right, what you need to do is unhook the springs for each of the levers, just flick them off from the button end of the pallet lever, then the pallet levers move freely. When you attach the whole thing, screw the base plate back onto the treble end and then put the springs back into place

That seems reasonable. While I'm at it, should I just spend the 75p for each key to put in a fresh spring? Is there any utility to having a properly "broken in" spring or is a new one just generally going to be better?

I can see no point in changing functional springs, I am not sure that 'broken in' springs differ from new ones in any significant manner.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal