Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: CC75 versus Beyerdynamic TG I52d (used to be Opus62) clipon mics. Real gig exper  (Read 8808 times)

0 Members and 1 Guest are viewing this topic.

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website

A while ago I purchased a couple of Beyerdynamic Opus62 (now called TG I52d) dynamic mics and a couple of T-bone (Thomann) CC75 microphones with an intention of trying them both out and comparing them.

Well, I've been doing this since Christmas on about 30 gigs and these are my conclusions.

Buy the T-bones ... well, it's a little more complicated than that  :-D

I've been using them mostly with two different rigs, one big one (24 track Allan & Heath Mixer, Opera speakers and Db bass bins),. and a small rig (Bose L1).

Basically I've been using the Beyerdynamic on one half of the gig and the T-bones on the other half.

The Beyerdynamics really do show their price, they are better built, the gooseneck clicks into place better and does not seem to wear, they have a proper metal grill on the capsule, they are also dynamic and do not use phantom power. Yes, I know that everywhere is supposed to have phantom power now, but you'd be surprised.

One of my older Beyerdynamics was once tossed into the back of a trailer by some eejit (not me!) and spent the journey back from Evesham being bounced all over by a big heavy Db bass bin. Happy I was not and I would have happily strangulated the said eejit there and then. Amazingly, it survived, still works and clips, and only lost one of its rubber coverings on the clip.

I wouldn't like to say what would happen to a T-bone in similar circumstances, but then again I haven't tried it.

The T-bones are surprisingly well made (for the price), have a slightly shorter reach, doen't have a "proper" gooseneck, though it seems to work. This seems to have been changed on new CC75's. They are also electret so need phantom power, which is everywhere these days ( (;) ), and certainly is on my rigs.

To be honest, in operation, apart from the CC75's needing a bit less gain, I can't tell much difference.

The T-bone has better bass and is brighter, the Beyerdynamic has a more even response across its range, but either of these can be "fixed" at the other end of the signal chain.

I wouldn't like to kick the T-bones across a stage (nor the Beyerdynamics to be honest), but at a third of the price I would be less worried about them. They fit better onto the bass end of a melodeon, lighter and shorter they don't flap around as much.

All in all I'm happy to have both sets of mics, but I'll be buying extra sets of CC75's now for all my boxes. Microphones are things that often go missing at gigs (grrrrrr!!!!!) especially when there are other bands involved (always keep an eye on your mics, mic stands etc etc.) I've never had problems with folk bands (nicer people) but rock and pop bands you've never met before can be real shits. My mics get well worked and earn their keep, but I'd still rather lose a 32 quid mic than a 100 quid one.

Prices from Thomann are:    T-bone CC75    -                   Â£   32.43
                                          Beyerdynamic TG I52d          £ 100.69


edited to add prices.
« Last Edit: April 14, 2013, 10:28:29 PM by Andrew Wigglesworth »
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website

Oh, the Beyerdynamics are hypercardidoid, the Tbones are only cardidioid. This makes a bit of a difference on the big rig, I have to be more careful where I put the box down and use an isolation switch, but it doesn't make an aweful lot of difference.

On the Bose L1 it seems to make no difference whatsoever.
« Last Edit: April 15, 2013, 07:59:18 AM by Andrew Wigglesworth »
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website

Another reply to myself  ::)

Ideally I use a stand mic (an AKG) for the treble end. However,  with even large stages getting filled up with ever larger rock drum kits (not my bands) space comes at a premium. I've had mic stands accidentally kicked away or had to contort into some peculiar positions to use a stand mic at times. A clipon is so much simpler to use especially if you're not on your own rig or have no control over the stage.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne

Thanks Andrew! I'm keeping an eye open for a good clip-on mike to upgrade from the old SM57 at some point so this is all very interesting. Just one thing: product descriptions for both these mikes state that they are designed for brass (and in the case of the T-bone, drums). The Beyer is said to "function best at high sound levels".

Now obviously when a box is played in a dance band, and a gooseneck mike is placed close to the treble grille, there is going to be a fair amount of sound, but nothing like (in my case anyway) a trombone or a snare drum. Have you noticed any problems when playing more quietly, if that is something you do?

I had been thinking of getting an Audio Technica ATM35 (or its current replacement), which is used by a good player I know, and which works very well with fiddles etc. But it is considerably more expensive even than the Beyer you are talking about, so if my fears about volume were allayed, I'd be glad to go for something cheaper.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

I'll chip in here to say I've used an Opus 62 for about 8 years.  It has been completely reliable until I recently damaged the cable through too much flexing, and had to re-solder the connections but it now still works fine.  It gives a nice sound, but I do find that it needs the maximum gain my mixing desk can provide.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...

Thanks Andrew! I'm keeping an eye open for a good clip-on mike to upgrade from the old SM57 at some point so this is all very interesting. Just one thing: product descriptions for both these mikes state that they are designed for brass (and in the case of the T-bone, drums). The Beyer is said to "function best at high sound levels".

Now obviously when a box is played in a dance band, and a gooseneck mike is placed close to the treble grille, there is going to be a fair amount of sound, but nothing like (in my case anyway) a trombone or a snare drum. Have you noticed any problems when playing more quietly, if that is something you do?

I had been thinking of getting an Audio Technica ATM35 (or its current replacement), which is used by a good player I know, and which works very well with fiddles etc. But it is considerably more expensive even than the Beyer you are talking about, so if my fears about volume were allayed, I'd be glad to go for something cheaper.
Any mic aimed at clipping on to the bell of brass instruments will be able to cope with much higher sound levels than any melodeon.

Similarly the sound level for a melodeon mic is a lot higher than mics used on instruments like guitars and fiddles, so almost any close mic will have no problem with output level being too quiet.

I use a Beyerdynamic Opus 82 set on the bass end, this was about £150 from Thomann but is unfortunately no longer available. Hypercardioid mics pick up less background noise from a stage (especially drum kit and monitors) but need more careful positioning.

The difficulty with using clip-on mics on the treble end is that most of them don't have a long enough gooseneck to get the capsule far enough way to get even pickup over the whole range, even with careful positioning -- the best position is mounted on the top of the box pointed down at the position of the highest treble reeds.

So long as the gooseneck is long enough, almost any clip-on instrument (or vocal) mic will work fine given these restrictions. Personally I still prefer a good hypercardioid mic on a short stand for the treble end, I've never had any real problem fitting this in even with the Committee Band on a small stage, but you have to stay in a fixed position.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods

Thanks for that Andrew. I've been considering getting the T-bone for my bass end, as it is within my budget. Perhaps when my budget becomes real rather than imaginary I will treat myself to one!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website

Thanks for that Andrew. I've been considering getting the T-bone for my bass end, as it is within my budget. Perhaps when my budget becomes real rather than imaginary I will treat myself to one!

Yes, I think what I'll be doing if faced with having to use clipons and nothing else is the T-bone CC75 on the bass end (it's lighter a bit shorter and doesn't flap around like the Beyerdynamic) and the Opus 62 on the treble end. After all this I have several of each.

I sit down whilst playing, I'm not much given to bouncing around stages these days, younger better looking people can do that for me, so a stand mike is not an issue, unless the stage is taken up by drums kits.

I think this is one of the issues. Folk festivals are used to acoustic instruments, the space they need etc. Rock, pop and "alternative" festivals really don't have a clue about anything past drummer, bass, rhythm guitar and lead. A melodeon just sends waves of panic through the sound crew ... two fiddles, a melodeon, flute,  bodhran, etc send them into meltdown.

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website

Thanks Andrew! I'm keeping an eye open for a good clip-on mike to upgrade from the old SM57 at some point so this is all very interesting. Just one thing: product descriptions for both these mikes state that they are designed for brass (and in the case of the T-bone, drums). The Beyer is said to "function best at high sound levels".

Now obviously when a box is played in a dance band, and a gooseneck mike is placed close to the treble grille, there is going to be a fair amount of sound, but nothing like (in my case anyway) a trombone or a snare drum. Have you noticed any problems when playing more quietly, if that is something you do?

I had been thinking of getting an Audio Technica ATM35 (or its current replacement), which is used by a good player I know, and which works very well with fiddles etc. But it is considerably more expensive even than the Beyer you are talking about, so if my fears about volume were allayed, I'd be glad to go for something cheaper.

I try to play with a variety of volumes. It's something that I like about stand mikes. You can move in and out on them, use them for more dynamics in a tune or set arrangement. I've not noticed a volume problem with any of the clip-ons, quite the opposite, they can be a bit too "up and at it" and always there. You can't move away from a clipon mike and twiddle a bit of tune or summat.

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website

Thanks Andrew! I'm keeping an eye open for a good clip-on mike to upgrade from the old SM57 at some point so this is all very interesting. Just one thing: product descriptions for both these mikes state that they are designed for brass (and in the case of the T-bone, drums). The Beyer is said to "function best at high sound levels".

Now obviously when a box is played in a dance band, and a gooseneck mike is placed close to the treble grille, there is going to be a fair amount of sound, but nothing like (in my case anyway) a trombone or a snare drum. Have you noticed any problems when playing more quietly, if that is something you do?

I had been thinking of getting an Audio Technica ATM35 (or its current replacement), which is used by a good player I know, and which works very well with fiddles etc. But it is considerably more expensive even than the Beyer you are talking about, so if my fears about volume were allayed, I'd be glad to go for something cheaper.
Any mic aimed at clipping on to the bell of brass instruments will be able to cope with much higher sound levels than any melodeon.

Similarly the sound level for a melodeon mic is a lot higher than mics used on instruments like guitars and fiddles, so almost any close mic will have no problem with output level being too quiet.

I use a Beyerdynamic Opus 82 set on the bass end, this was about £150 from Thomann but is unfortunately no longer available. Hypercardioid mics pick up less background noise from a stage (especially drum kit and monitors) but need more careful positioning.

The difficulty with using clip-on mics on the treble end is that most of them don't have a long enough gooseneck to get the capsule far enough way to get even pickup over the whole range, even with careful positioning -- the best position is mounted on the top of the box pointed down at the position of the highest treble reeds.

So long as the gooseneck is long enough, almost any clip-on instrument (or vocal) mic will work fine given these restrictions. Personally I still prefer a good hypercardioid mic on a short stand for the treble end, I've never had any real problem fitting this in even with the Committee Band on a small stage, but you have to stay in a fixed position.

The Opus 62 has a pretty long gooseneck, so getting it about half a foot or so from the treble end isn't a problem. I've been doing it from the side (front) and hadn't considered trying it clipped to the top end, that seems to make sense but the grill also distributes the sound so I haven't noticed a problem with the side mounting.  There might be an issue with my one row (no grill) so I'll have to experiment with that.

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website

Thanks Andrew! I'm keeping an eye open for a good clip-on mike to upgrade from the old SM57 at some point

Keep the SM57 though!.  Stick it into a gig bag for when other fancy mics go wrong, and they do.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...

Thanks Andrew! I'm keeping an eye open for a good clip-on mike to upgrade from the old SM57 at some point so this is all very interesting. Just one thing: product descriptions for both these mikes state that they are designed for brass (and in the case of the T-bone, drums). The Beyer is said to "function best at high sound levels".

Now obviously when a box is played in a dance band, and a gooseneck mike is placed close to the treble grille, there is going to be a fair amount of sound, but nothing like (in my case anyway) a trombone or a snare drum. Have you noticed any problems when playing more quietly, if that is something you do?

I had been thinking of getting an Audio Technica ATM35 (or its current replacement), which is used by a good player I know, and which works very well with fiddles etc. But it is considerably more expensive even than the Beyer you are talking about, so if my fears about volume were allayed, I'd be glad to go for something cheaper.
Any mic aimed at clipping on to the bell of brass instruments will be able to cope with much higher sound levels than any melodeon.

Similarly the sound level for a melodeon mic is a lot higher than mics used on instruments like guitars and fiddles, so almost any close mic will have no problem with output level being too quiet.

I use a Beyerdynamic Opus 82 set on the bass end, this was about £150 from Thomann but is unfortunately no longer available. Hypercardioid mics pick up less background noise from a stage (especially drum kit and monitors) but need more careful positioning.

The difficulty with using clip-on mics on the treble end is that most of them don't have a long enough gooseneck to get the capsule far enough way to get even pickup over the whole range, even with careful positioning -- the best position is mounted on the top of the box pointed down at the position of the highest treble reeds.

So long as the gooseneck is long enough, almost any clip-on instrument (or vocal) mic will work fine given these restrictions. Personally I still prefer a good hypercardioid mic on a short stand for the treble end, I've never had any real problem fitting this in even with the Committee Band on a small stage, but you have to stay in a fixed position.

The Opus 62 has a pretty long gooseneck, so getting it about half a foot or so from the treble end isn't a problem. I've been doing it from the side (front) and hadn't considered trying it clipped to the top end, that seems to make sense but the grill also distributes the sound so I haven't noticed a problem with the side mounting.  There might be an issue with my one row (no grill) so I'll have to experiment with that.
Speaking wearing my sound man hat, the difference in volume might not be obvious to you while playing/listening to foldback, but it can be quite obvious out front. I've often noticed with boxes using a front-mounted gooseneck mic the notes in the middle of the keyboard are louder than at the ends, and it's not the box itself because it's OK if you listen acoustically or use a stand mic at least a foot away. And you can't recover this difference with equalisation, you just end up with the tune disappearing if it goes towards the top of bottom end of the range.

You can see if this is happening quite easily by plugging the gooseneck mic into one mixer channel panned left, and a more distant stand mic into a second channel panned right, then look at the balance between the two channels as you play up and down the keyboard (and listen on headphones). If you set them to equal volume in the middle, the gooseneck will be quieter at the two ends -- the difference depends on the mic pattern and distance from the grille but it can easily be 5dB which is quite obvious.

If you mount the gooseneck on the top and point it towards the highest reed, the response is 6dB down at 90 degrees off-axis for a cardioid mic, so if you position it so that the distance to the lowest reed is about half the distance to the highest reed but at right-angles to the mic axis you get almost even pickup -- if the pallets are spread over 25cm, position the mic about 12cm away. Since the mounting clip is usually about 3cm in from the edge of the box, this means you need a mic with a 15cm gooseneck where the mic axis is at right-angles to the gooseneck.

This gives much more even pickup, and also means your head is near the pickup pattern null so any grunts or talking/shouting at other people get rejected :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal