Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: JTS MELODEON MICS  (Read 19568 times)

0 Members and 1 Guest are viewing this topic.

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
JTS MELODEON MICS
« on: January 06, 2009, 02:07:53 PM »

I've just invested in some new melodeon mics, having got fed up with the feedback from my M------x system.
The mics I bought are a JTS CX516Wgooseneck mic for the right hand, a CM501 clip-on mic for the left hand and a PS500 power supply.
The sound is far superior to the old system and cheaper and they handle high sound levels really well.  I got mine for £125 from Digital Village, who have to get them on special order from Proel. Even so from order to delivery only took 3 days.
See them here
http://www.jts.com.tw/_english/02_products/03_detail.php?MainID=3&SID=19&ID=119
http://www.jts.com.tw/_english/02_products/03_detail.php?MainID=45&SID=49&ID=111
http://www.jts.com.tw/_english/02_products/03_detail.php?MainID=6&SID=27&ID=52

One important point is the right hand mic must be the CX516Wand not the CX516 if using with the PSU, as the plugs are different.

I've also been using two of the CM501s on my Jeffries anglo with excellent results. These I use on a couple of goosenecks made from electrical cable - simple but effective.

 I've also being using them wirelessly by adding in a AKG SO40 plug in transmitter and an AKG SR40 receiver.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: JTS MELODEON MICS
« Reply #1 on: January 06, 2009, 02:28:33 PM »

I was looking at those just a few days ago.  Do you know if they do phantom powered versions?  I'd prefer not to be encumbered witrh battery packs.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: JTS MELODEON MICS
« Reply #2 on: January 06, 2009, 02:55:15 PM »

Hi Theo,

The CX516 gooseneck mic (not CX516W) has a standard XLR, which will plug straight into your stage box or mixer and run on phantom power. The CM501 clip-on mic only comes with a mini XLR as far as I know - but I'm sure this could be changed. It might be best to speak to Proel first to make sure 020 8761 9911 . I found them to be most helpful and knowledgeable.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: JTS MELODEON MICS
« Reply #3 on: January 07, 2009, 07:39:20 PM »

Can I suggest an alternative solution? I use two stand-mounted Samson Q1 (phantom-powered) Condenser mikes, one for the treble end, one for the bass.  The cone of sound response for these is so narrow and restricted that feedback is no longer a problem, provided you turn the mikes directly away from the foldback speaker.  On the bass end it really is no problem to put the mike pointing in a compromise direction.  In fact I usually play with the monitor really quite close, and I find that if I was so foolish as to want to, I could quite easily drown out all the other instruments without any feedback!  So my problem is almost the opposite - I run the PA system, but I'd like to give the violin lead more power, and I wonder if your gooseneck mikes would do it?  Violinists tend to move about a lot, and so the Samson Q1 solution may not be the best.  Would the goosenecks be good for a violin, do you think?
Logged

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: JTS MELODEON MICS
« Reply #4 on: January 07, 2009, 11:24:20 PM »

When Microvox first came out I cut one up and installed the component parts inside my Dony.  It has been excellent for about eighteen years but mic tech has moved on and I too now use phantom powered condenser mics, one each side as well as my inbuilt mics.  It means I can easily switch between melodeons I hadn't previously used on stage.  In turn this gives a greater range and variety of sounds for the audience / dancers.  The condenser mics give a much more detailed sound than the in-builts and I agree with Chris, hardly any feedback and more than enough power.

Certainly the attached goose necks give total freedom to move about, as do my in-builts but it's me not the mics that can no longer run round the stage.
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: JTS MELODEON MICS
« Reply #5 on: January 08, 2009, 12:13:14 AM »

Can I suggest an alternative solution? I use two stand-mounted Samson Q1 (phantom-powered) Condenser mikes, one for the treble end, one for the bass.  The cone of sound response for these is so narrow and restricted that feedback is no longer a problem, provided you turn the mikes directly away from the foldback speaker.  On the bass end it really is no problem to put the mike pointing in a compromise direction.  In fact I usually play with the monitor really quite close, and I find that if I was so foolish as to want to, I could quite easily drown out all the other instruments without any feedback!  So my problem is almost the opposite - I run the PA system, but I'd like to give the violin lead more power, and I wonder if your gooseneck mikes would do it?  Violinists tend to move about a lot, and so the Samson Q1 solution may not be the best.  Would the goosenecks be good for a violin, do you think?
Chris
I think the CX516 gooseneck mics might be a little obtrusive for a fiddle, probably better to go for one of these http://www.jts.com.tw/_english/02_products/03_detail.php?MainID=3&SID=19&ID=49
which can possibly be clipped to the shoulder rest.
« Last Edit: January 08, 2009, 12:16:04 AM by martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: JTS MELODEON MICS
« Reply #6 on: January 08, 2009, 02:45:36 PM »

So my problem is almost the opposite - I run the PA system, but I'd like to give the violin lead more power, and I wonder if your gooseneck mikes would do it?  Violinists tend to move about a lot, and so the Samson Q1 solution may not be the best.  Would the goosenecks be good for a violin, do you think?
Many violinists use gooseneck-type mics, often lavalier types connected to a wireless transmitter. In addition to the JTS one already mentioned, Audio-Technica have a gooseneck which can be used with a lavalier mic, the AT8418. It can be clipped to the chin rest. Accusound have a gooseneck system which clips to the tailpiece and is used by some top performers.

There are alternatives to goosenecks: DPA have a little rubber gizmo to attach a lavalier mic between the bridge and tailpiece. It can be bought separately from DPA's very expensive mics. Audio-Technica supply a velcro violin fitting for its ATM350, see photo 5. It's available separately as the AT8468, or easily replicated with a couple of bits of velcro and a piece of elastic. Having tried a gooseneck, this is my daughter's preferred solution, combined with a lavalier mic and wireless transmitter.
Logged

Simon W

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: JTS MELODEON MICS
« Reply #7 on: January 08, 2009, 05:07:39 PM »

There are alternatives to goosenecks: DPA have a little rubber gizmo to attach a lavalier mic between the bridge and tailpiece. It can be bought separately from DPA's very expensive mics. Audio-Technica supply a velcro violin fitting for its ATM350, see photo 5. It's available separately as the AT8468, or easily replicated with a couple of bits of velcro and a piece of elastic. Having tried a gooseneck, this is my daughter's preferred solution, combined with a lavalier mic and wireless transmitter.
[/quote]

I had to opportunity to try out a Headway band recently and was very impressed - really easy to use and the sound is very very good - our soundman was very complimentary which is unusual for him. It doesn't need a pre-amp which is another bonus,
http://www.headwayelectronics.com/acoustic_pickups_violin.htm

Simon
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: JTS MELODEON MICS
« Reply #8 on: January 08, 2009, 06:40:56 PM »

One drawback  to be aware of is that lavalier mics are usually omnidirectional, so if you plan to use a (relatively) quiet instrument like a fiddle on a loud stage you may get feedback at lower gain than with a directional mic like the jts gooseneck.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: JTS MELODEON MICS
« Reply #9 on: January 08, 2009, 07:26:08 PM »

I was looking at those just a few days ago.  Do you know if they do phantom powered versions?  I'd prefer not to be encumbered witrh battery packs.

I use a CX-508 for the bass end, clipped onto the bottom end of the left hand strap and pointing at the bass end sound holes:

http://www.jts.com.tw/_english/02_products/03_detail.php?MainID=3&SID=19&ID=49

This works very well, no feedback problems, phantom powered, consistent volume (unlike a stand mike) no matter how much the bass end moves around. And it's easy to swap from box to box, you don't have to screw any mounting clips to it.

But I still prefer a decent stand-mounted hypercardioid mic for the treble and (I use an AKG D3900 about a foot away) to a clip-on, because the pickup is more even across the whole keyboard, and I can move on and off the mic when I play quieter or louder boxes -- or right away from the mic if I want a quick twiddle of something that isn't what the band is currently playing (like the next tune).

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: JTS MELODEON MICS
« Reply #10 on: January 08, 2009, 08:52:57 PM »

One drawback  to be aware of is that lavalier mics are usually omnidirectional, so if you plan to use a (relatively) quiet instrument like a fiddle on a loud stage you may get feedback at lower gain than with a directional mic like the jts gooseneck.
There are cardiod lavalier mics available. We use an Audio-Technica AT829cW without feedback problems, admittedly not in a very loud environment (4 accordions, 2 fiddles, church hall). An acquaintance uses an Audio-Technica ATM350 cardiod in on her fiddle in a more heavily-amplified band in an accordion & fiddle club, again without feedback. Thomann has a useful-looking wireless mic system with a cardiod lavalier mic.
Logged

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: JTS MELODEON MICS
« Reply #11 on: January 08, 2009, 09:34:39 PM »

Slightly off thread of melodeon mics.  These are the best fiddle pick ups I've ever come across http://www.sonicviolins.co.uk/
When these are in the band it's about the only time melodeon players have to complain about the volume of the fiddle.
The guy owning and running the business is 'Tich' Roberts, lead player for Black Sheep.  Check out his client list
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: JTS MELODEON MICS
« Reply #12 on: January 09, 2009, 01:04:56 PM »

I've ordered one of the CX516 models to see what it does.  They look suspiciously like the recently discontinued AKG c416pp models I used before which have proved irreplaceable so far.  The mounting looks a little cheaper than the AKG ones, but the CX 508s look a dead ringer for the AKG c419pp which were brilliant mics.  The specs look slightly different but pretty close.

One thing to bear in mind is that the CX508s go down to 50Hz but the CX516s are all the way down to 30Hz which is only really a concern if you want to artificially enhance the sub bass elements of the melodeon ... which I do.

I'm not holding my breath though - I'm just hoping!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: JTS MELODEON MICS
« Reply #13 on: January 09, 2009, 01:33:34 PM »

One thing to bear in mind is that the CX508s go down to 50Hz but the CX516s are all the way down to 30Hz

On the response graphs the bottom end of the CX-508 actually looks better.  They show the graph down to 30Hz, where the 508 is -5dB,  but the 516 is -8dB
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: JTS MELODEON MICS
« Reply #14 on: January 09, 2009, 07:24:19 PM »

One thing to bear in mind is that the CX508s go down to 50Hz but the CX516s are all the way down to 30Hz

On the response graphs the bottom end of the CX-508 actually looks better.  They show the graph down to 30Hz, where the 508 is -5dB,  but the 516 is -8dB

We did get some quite loud feedback once from my bass end mic at about 25Hz when I was playing the Tommy (quiet treble end) and both ends were turned right up by mistake when I came in to lead a tune. It didn't half make the hall wobble until we found what was causing it..

Ian

P.S. Yes our bass bin (the "Russian dolls" one) *is* flat down to 25Hz, I built it when Tone was using his home-built 3-string bass (extra long scale, bottom G below piano A as lowest note) for Will's Way.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: JTS MELODEON MICS
« Reply #15 on: January 10, 2009, 12:30:21 PM »

It actually makes sense to roll off the bass below the fundamental of the lowest note to avoid very low resonances which are capable of feeding back, muddying the sound and potentially destroying bass bins
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: JTS MELODEON MICS
« Reply #16 on: January 10, 2009, 01:36:28 PM »

It actually makes sense to roll off the bass below the fundamental of the lowest note to avoid very low resonances which are capable of feeding back, muddying the sound and potentially destroying bass bins

Yes I know that, we normally do this but it wasn't done on this occasion (newbie sound guy, hurried setup) -- I was just using the example to show that these mics do have extended bass response.

Incidentally, if you ever play on an outdoor stage you'll need the supplied windshield, they're also quite sensitive to wind rumble -- as I found out at Towersey, having lost my windshield (never having needed it before).

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: JTS MELODEON MICS
« Reply #17 on: January 11, 2009, 02:39:51 PM »

However there is a bad point to these mics, they're not so reliable :-(

We were playing at Oxfolk last night and my CX508 was dead -- crackle pop bang, almost no sound -- luckily Sam had his box of clip-on AKG drum mics with him and I could use one of those instead, but only because we were drummerless for the first time in years due to Rob's car irreparably (according to the AA) breaking down on the way to the gig...

This is the second time this has happened, the first one failed after a couple of years which I thought was a one-off failure -- but now its replacement has done the same, so I'll be looking for a better-quality replacement.

Can anybody recommend one? (I'll search for AKG, Audio-Technica etc but I'd value any personal recommendations)

Cheers

Ian

Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: JTS MELODEON MICS
« Reply #18 on: January 11, 2009, 04:57:44 PM »

we were drummerless for the first time in years due to Rob's car irreparably (according to the AA) breaking down on the way to the gig...

This is the second time this has happened, the first one failed after a couple of years which I thought was a one-off failure -- but now its replacement has done the same, so I'll be looking for a better-quality replacement.

Can anybody recommend one?

Cheers

Ian

I believe the new Fords are very reliable
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: JTS MELODEON MICS
« Reply #19 on: January 11, 2009, 05:15:43 PM »

we were drummerless for the first time in years due to Rob's car irreparably (according to the AA) breaking down on the way to the gig...

This is the second time this has happened, the first one failed after a couple of years which I thought was a one-off failure -- but now its replacement has done the same, so I'll be looking for a better-quality replacement.

Can anybody recommend one?

Cheers

Ian

I believe the new Fords are very reliable

I'll tell Rob, I expect he's gone right off Citroen...

Ian

P.S. Decided on a Beyerdynamic Opus 82 set, response looks better suited to bass end than AKG C419M -- difficult to find in the UK, but Thomann are well-established and have 30-day money back and 3-year product guarantees -- I'll let you all know what I think when I get it.

http://www.thomann.de/gb/beyerdynamic_opus_82_set.htm
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal