Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: JTS MELODEON MICS  (Read 19588 times)

0 Members and 1 Guest are viewing this topic.

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: JTS MELODEON MICS
« Reply #20 on: January 11, 2009, 08:24:22 PM »

I've ordered one of the CX516 models to see what it does.  They look suspiciously like the recently discontinued AKG c416pp models I used before which have proved irreplaceable so far.

The AKG C416 has been replaced by the 516.  They seem to be a bit more robust, especially the mounting - I've broken a couple C 416s, those flimsy plastic springs which clip into the mount can just snap off.  However the mount for the 516 is also a bit more bulky so it may not be as easy to fit to your instrument.

The JTS ones look promising, it will be interesting to see how they perform.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: JTS MELODEON MICS
« Reply #21 on: January 11, 2009, 08:59:01 PM »

I've ordered one of the CX516 models to see what it does.  They look suspiciously like the recently discontinued AKG c416pp models I used before which have proved irreplaceable so far.

The AKG C416 has been replaced by the 516.  They seem to be a bit more robust, especially the mounting - I've broken a couple C 416s, those flimsy plastic springs which clip into the mount can just snap off.  However the mount for the 516 is also a bit more bulky so it may not be as easy to fit to your instrument.

The JTS ones look promising, it will be interesting to see how they perform.

They perform fine and are inexpensive, but 2 out of 2 failure rate doesn't bode well...

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: JTS MELODEON MICS
« Reply #22 on: January 12, 2009, 02:01:26 AM »

The AKG 419/416 models were just as flimsy and I have now had 12 go pop on me - just the one left still working.  I have tried the similar mics on both hands and nothing comes close to the AKG discontinued ones as following:

Shure beta - low gain - very mid range heavy sound - not recommended
AKG 519 - OK for right hand - but lack the bass response for the left to be rich enough for me.  Plus point is that they're more robust but seemingly cheaper capsules than their predecessors.
Audio Technica - very promising - better on right hand than the old AKG ones, would be brilliant on the bass if it wasn't for the wind noise - if you wrap the capsule up enough to eliminate the wind boom you get a weak sound.

Hence why I'm eager to try these cheapos which look like 419 clones to me.

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: JTS MELODEON MICS
« Reply #23 on: January 12, 2009, 10:37:35 AM »

The AKG 419/416 models were just as flimsy and I have now had 12 go pop on me - just the one left still working.  I have tried the similar mics on both hands and nothing comes close to the AKG discontinued ones as following:

Shure beta - low gain - very mid range heavy sound - not recommended
AKG 519 - OK for right hand - but lack the bass response for the left to be rich enough for me.  Plus point is that they're more robust but seemingly cheaper capsules than their predecessors.
Audio Technica - very promising - better on right hand than the old AKG ones, would be brilliant on the bass if it wasn't for the wind noise - if you wrap the capsule up enough to eliminate the wind boom you get a weak sound.

Hence why I'm eager to try these cheapos which look like 419 clones to me.

Cheers

Squeezy
Which mics do you use on your concertina?
I've just this weekend changed from the JTS CM501s to JTS 516Ws on mine. The goosenecks on these are much better than my homemade ones! And with a little adjustment of the EQ it's possible to get a good natural sound. The mounting plates also seem quite sturdy and spares are easily available from Bernard Loffet. 

Do you use a wireless system with yours?

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: JTS MELODEON MICS
« Reply #24 on: January 18, 2009, 08:14:42 PM »

I've always used the same mics and channels for my concertina as for the melodeon - I just use industrial strength velcro (the type you get with the hooks going in 2 opposite directions) to attach to the instruments.

I haven't used the JTS one I bought online through a proper PA system, but listening through my mixer on headphones they have the same sort of gain on them as the old AKG ones, but seem a bit more nasal and mid heavy sounding which I feared would be the case (a sure sign of cheaper capsules - which of course you'd expect at a third of the price!)

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: JTS MELODEON MICS
« Reply #25 on: January 18, 2009, 08:30:38 PM »

we were drummerless for the first time in years due to Rob's car irreparably (according to the AA) breaking down on the way to the gig...

This is the second time this has happened, the first one failed after a couple of years which I thought was a one-off failure -- but now its replacement has done the same, so I'll be looking for a better-quality replacement.

Can anybody recommend one?

Cheers

Ian

I believe the new Fords are very reliable

I'll tell Rob, I expect he's gone right off Citroen...

Ian

P.S. Decided on a Beyerdynamic Opus 82 set, response looks better suited to bass end than AKG C419M -- difficult to find in the UK, but Thomann are well-established and have 30-day money back and 3-year product guarantees -- I'll let you all know what I think when I get it.

http://www.thomann.de/gb/beyerdynamic_opus_82_set.htm

Tried the Beyerdynamic out today (listening through DT770 headphones which have excellent bass response), it sounds very good on the bass end, though the real proof will be at our next gig.

The capsule is a lot bigger (about 15mm diameter) than the AKG/JTS mics and there's rather less flexibility in how it can be positioned, but I managed to clip it onto the bottom of the bass end strap and end up with it about 10cm away from the sound holes and pointing towards them, which should be ideal -- it also has very good noise isolation through the flexible mount, probably because the capsule is bigger and heavier.

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: JTS MELODEON MICS
« Reply #26 on: January 19, 2009, 10:18:24 AM »

I haven't used the JTS one I bought online through a proper PA system, but listening through my mixer on headphones they have the same sort of gain on them as the old AKG ones, but seem a bit more nasal and mid heavy sounding which I feared would be the case (a sure sign of cheaper capsules - which of course you'd expect at a third of the price!)

The joke about all this is that if you make your own mics from the bare capsule, they cost a couple of quid each - that's the top price.  The part that's difficult is the swanneck and mounting for the right hand.  A boundary mic type for the bass is simple to make.  Using the AKG 416s, I found that the swanneck ends cracked open, sometimes leading to a failure of the wiring.  After reattaching the wires, I strap everything back together with duct tape - but it doesn't give peace of mind!  Perhaps one should buy the "cheap" JTS mics and then retrofit decent Panasonic capsules...?

Rob.

Had to edit the word swanneck - I kept giving away my sailing proclivities by saying "gooseneck".
« Last Edit: January 19, 2009, 10:20:35 AM by Rob2Hook »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: JTS MELODEON MICS
« Reply #27 on: January 19, 2009, 11:34:33 PM »

I haven't used the JTS one I bought online through a proper PA system, but listening through my mixer on headphones they have the same sort of gain on them as the old AKG ones, but seem a bit more nasal and mid heavy sounding which I feared would be the case (a sure sign of cheaper capsules - which of course you'd expect at a third of the price!)

The joke about all this is that if you make your own mics from the bare capsule, they cost a couple of quid each - that's the top price.  The part that's difficult is the swanneck and mounting for the right hand.  A boundary mic type for the bass is simple to make.  Using the AKG 416s, I found that the swanneck ends cracked open, sometimes leading to a failure of the wiring.  After reattaching the wires, I strap everything back together with duct tape - but it doesn't give peace of mind!  Perhaps one should buy the "cheap" JTS mics and then retrofit decent Panasonic capsules...?

Rob.

Had to edit the word swanneck - I kept giving away my sailing proclivities by saying "gooseneck".

It's difficult getting good quality non-omnidirectional capsules with a good bass response; I've used tieclip mics in the past and they're cheap but suffer much more from feedback than the cardioid or hypercardioid mics like the AKG/Beyer/JTS, as do boundary mics -- assuming you use foldback and want to hear your bass end, or are loud through the FOH speakers.

The Panasonic capsules are not what I'd call good quality; I had a samples of a miniature Sennheiser one in the past which was far better (but about 20 quid each if I remember correctly), and I've got a bag of Gentex aerospace quality ones somewhere (unfortunately they don't supply them any more) which I was going to try inside the box but never got round to...

I think most people are looking for advice on something they can buy, not build themselves :-)

Ian

P.S> I found the Gentex mics again here    http://www.gentexcorp.com/default.aspx?pageid=1649
« Last Edit: January 19, 2009, 11:42:25 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: JTS MELODEON MICS
« Reply #28 on: January 22, 2009, 08:13:33 PM »

You can put the finest mike in the world on your box and it will still sound horrible if you are using a cheap P A. I stripped down a melodeon mike I got from Mallinsons a few years ago and rebuilt it inside  of the melodeon. I also wired in a few more little button type mikes from Maplins and boosted them up using 9v instead of 6v. They worked a treat through our peavey system, but once when we used a 'house' PA it sounded really rough.

I also found that I could tailor the sound I wanted by plugging into a guitar  multi-effects pedal. I could make the sound coming out of the speakers and foldbacks sound as wet or dry as I wanted. Naturally I had to try all the wierd sounds as well where I could make the final sound come out like a sax, or use full orchestral and play Beethovens ninth. (great tune for circassion circle)

Anyway make sure you get the best system as you can afford, they auction off some good un-used bits at the end of group tours, as they have to carry spares of everything. Then get yourself a cheap chinese box, wire it up, add a pedal and make it sound like a wet soprani or a dry cajun.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal